T-34/122
Egyptian 122 mm Self-Propelled Gun
Rye Field Model | No. RM-5013 | 1:35
Gerçekler
- Marka:
- Rye Field Model (RFM)
- Başlık:
- T-34/122 Egyptian 122 mm Self-Propelled Gun
- Numara:
- RM-5013
- ölçek:
- 1:35
- tip:
- Tam kiti
- Yayınlandı:
- 2018 Yeni araç
- Barkod:
- 4897062620224 (EAN)
- paketleme:
- Sert kutu (Üst açıcı)
- konu:
- T-34 » Tanklar (Araçlar)
Kutu içeriği
Plastik ladin, Fotoetrik perde, çubuk
boyutlar:
200x300x50 mm
(7.9x11.8x2 inch)
Ürün zaman çizelgesi
Rye Field Model
Talimatlar
İndir 13696Kb (.pdf)
Pazaryeri
No partner shops available
Kutu içi incelemeler
Dış incelemeler
reklâm
gözden geçirmek Small Soldier
Tüm incelemeler » (10 toplamda)
Dergiler
tüm dergiler » (5 toplamda)
Yorumlar
grappa_0_0_0
like a dumb asshole I followed the instructions and I ended up with a ruined model and a headache. If you're building this kit, when it's time to install the canvas cover and the frontal "shield" of the turret, glue and align the plate first AND THEN add or adjust the canvas. If you glue the canvas to the frontal plate and then try to glue the latter to the main body of the turret, everything will be misaligned.
like a dumb asshole I followed the instructions and I ended up with a ruined model and a headache. If you're building this kit, when it's time to install the canvas cover and the frontal "shield" of the turret, glue and align the plate first AND THEN add or adjust the canvas. If you glue the canvas to the frontal plate and then try to glue the latter to the main body of the turret, everything will be misaligned.
18 August 2024, 15:25
Ben M
You can often dissolve glued joints without damage by wetting the joints with tamiya ultra thin. Then you can disassemble and have another go.
You can often dissolve glued joints without damage by wetting the joints with tamiya ultra thin. Then you can disassemble and have another go.
18 August 2024, 15:29
Projeler
Referans materyali
Bütün kitaplar » (62 toplamda) Tüm geziler » (321 toplamda)