British Heavy Tank FV214 Conqueror Mk I
Amusing Hobby | No. 35A006 | 1:35
Gerçekler
- Marka:
- Amusing Hobby
- Başlık:
- British Heavy Tank FV214 Conqueror Mk I
- Numara:
- 35A006
- ölçek:
- 1:35
- tip:
- Tam kiti
- Yayınlandı:
- 2016 Yeni araç
- Barkod:
- 4589913217966 (EAN)
- konu:
- FV214 Conqueror » Tanklar (Araçlar)
Kutu içeriği
Plastik ladin, Fotoetrik perde, Decalsheet (su kaydırağı)
boyutlar:
395x265x75 mm
(15.6x10.4x3 inch)
Ağırlık:
690 g (1.52 lbs)
tarafından tasarlanan Boxart Valery Petelin
Ürün zaman çizelgesi
Amusing Hobby
Talimatlar
İndir 7028Kb (.pdf)
Pazaryeri
No partner shops available
Kutu içi incelemeler
Dış incelemeler
reklâm
gözden geçirmek Modeledo.pl internetowy sklep modelarski
Tüm incelemeler » (8 toplamda)
Yorumlar
Ron Garcia
My first amusing Hobby kit and it was a good one. This was an easy kit to build. I can honestly say this is the first kit that I have built with working tracks that actually fulfilled that promise. The links clicked together and were a breeze to put together.
The only trouble I had was with the PE braces that are supposed to hold the tow cables in place. There are no bend lines so it was a bit difficult to make sure they all bent in the same Z shape. It was all for naught anyway because when I actually ran the wire underneath them - Zing! - they all started popping off to parts unknown. I used the tow cables without them and they still look fine.
A couple of nitpicks are that there are no clear parts and gun mantlet cover. Not a big deal but still...
So, a nice ending to my last British tank in my stash. Highly recommended!
My first amusing Hobby kit and it was a good one. This was an easy kit to build. I can honestly say this is the first kit that I have built with working tracks that actually fulfilled that promise. The links clicked together and were a breeze to put together.
The only trouble I had was with the PE braces that are supposed to hold the tow cables in place. There are no bend lines so it was a bit difficult to make sure they all bent in the same Z shape. It was all for naught anyway because when I actually ran the wire underneath them - Zing! - they all started popping off to parts unknown. I used the tow cables without them and they still look fine.
A couple of nitpicks are that there are no clear parts and gun mantlet cover. Not a big deal but still...
So, a nice ending to my last British tank in my stash. Highly recommended!
26 March 2023, 03:06
Projeler
galeri
Referans materyali
Conqueror Heavy Gun Tank Britain's Cold War Heavy Tank - Großbritanniens Schwerer Kam...
British Special No. 9023
Carl Schulze
2015 Bütün kitaplar » (3 toplamda) Tüm geziler » (3 toplamda)