Lockheed SR-71 A Blackbird
Revell | No. 04967 | 1:48
Fapte
- Marca:
- Revell
- Titlu:
- Lockheed SR-71 A Blackbird
- Număr:
- 04967
- Scară:
- 1:48
- Tip:
- Kit complet
- Eliberată:
- 2021 Instrumentul nou
- Cod de bare:
- 4009803049670 (EAN)
- ambalare:
- Casetă rigidă (deschizător de vârf)
- Subiect:
- Lockheed SR-71 Blackbird » jeturi (avioane)
Marcajele
Lockheed SR-71 Blackbird
Lockheed SR-71A Blackbird
US Air Force (1947-now)
- AF FTC FTG AF61-7958
Iulie 1976 World Speed Record Runs
(High Visibility Scheme) - AF FTC FTG AF61-7972
Martie 1990 Los Angeles to Washington D.C. speed record
Low Vis Scheme - Det.2, 9 RW AF-61-7967 | BB
octombrie 1997 USAF Last flight - Edwards AFB, CA
Low Vis Scheme - Lockheed Flight test aircraft AF61-7955
1972 Palmdale plant 42 - Edwards AFB, CA
(High Visibility Scheme)
Conținutul cutiei
Dimensiuni:
596x422x115 mm
(23.5x16.6x4.5 inch)
Greutate:
204 g (0.45 lbs)
Boxart proiectat de Egbert K.L. Friedl
Cronologie produs
Revell
Instrucțiuni
Descarca 21593Kb (.pdf)
Piata de desfacere
No partner shops available
In-box recenzii
Recenzii externe
Publicitate
Recenzie în cutie Modellbau-Koenig
Toate recenziile » (22 in total)
reviste
Toate revistele » (3 in total)
Comentarii
reefta
Anyone built it yet? I am very worry of throwing away that much money at revl kit after their F18 screwup
Anyone built it yet? I am very worry of throwing away that much money at revl kit after their F18 screwup
8 February 2022, 15:02
Stephen G
I'm almost finished. Would have finished before now, but one of the intake cones was a weird shape and needed a replacement.
My honest opinion? It's better than standard Revell fare. But - their design team (who have made clear progress) is being let down by their factory and plastic quality, in my opinion. Some things not picked up on in most reviews:
- The panel lining can be VERY shallow in places and any sanding will result in the need to re-scribe, and in a couple of instances the lines just randomly stop...
- There are some bad sink marks I've come across in a few of the parts
- If you look carefully you will start to see little dents, marks and deformities in the plastic. At least mine had around half a dozen.
There are other things about, but... it is a Blackbird and it is better than any other option. The fit is decent, the only filling I had to do was the engines to the fuselage. You do get a decent stand for it. The decals are fine. And there aren't that many pieces, so it's a quick build with a big end product.
Would I buy another Revell kit on the back of the experience? Probably not.
That's my two cents!
I'm almost finished. Would have finished before now, but one of the intake cones was a weird shape and needed a replacement.
My honest opinion? It's better than standard Revell fare. But - their design team (who have made clear progress) is being let down by their factory and plastic quality, in my opinion. Some things not picked up on in most reviews:
- The panel lining can be VERY shallow in places and any sanding will result in the need to re-scribe, and in a couple of instances the lines just randomly stop...
- There are some bad sink marks I've come across in a few of the parts
- If you look carefully you will start to see little dents, marks and deformities in the plastic. At least mine had around half a dozen.
There are other things about, but... it is a Blackbird and it is better than any other option. The fit is decent, the only filling I had to do was the engines to the fuselage. You do get a decent stand for it. The decals are fine. And there aren't that many pieces, so it's a quick build with a big end product.
Would I buy another Revell kit on the back of the experience? Probably not.
That's my two cents!
11 February 2022, 10:43
Kevin Johnson
Yeah it looks like it might need rescribing in places. I don't have any problems doing that, really, but this kit is fairly expensive and more effort could have been made.
Yeah it looks like it might need rescribing in places. I don't have any problems doing that, really, but this kit is fairly expensive and more effort could have been made.
16 August 2022, 18:25
reefta
I almost finished mine
Its not a good kit by any means, so many seamlines just about everywhere to fill, sand and re-scribe.
For around 100$ kit i would have expect a much better kit
I almost finished mine
Its not a good kit by any means, so many seamlines just about everywhere to fill, sand and re-scribe.
For around 100$ kit i would have expect a much better kit
17 August 2022, 08:13
Erik Leijdens
Have this kit too, looks good in the box. Busy with the Italeri/Testors YF-12 at the moment, wonder how it compares to the Revell SR-71 when building it.
Have this kit too, looks good in the box. Busy with the Italeri/Testors YF-12 at the moment, wonder how it compares to the Revell SR-71 when building it.
17 August 2022, 08:16
reefta
Im well unto the build i gotta say, this kit is god damn trash
Yes, its impressive in size and has very nice details all around, but not a single major construction went without tons of sanding and filling work.
The parts fits nicely, but every step has very noticeable and wide seam lines to fix, just horrible
Im well unto the build i gotta say, this kit is god damn trash
Yes, its impressive in size and has very nice details all around, but not a single major construction went without tons of sanding and filling work.
The parts fits nicely, but every step has very noticeable and wide seam lines to fix, just horrible
28 June 2022, 20:34
Jeremy Wiltcher
Finally got mine, they are the US release I guess, fewer parts. There is no stand or engines and of course the box art is different.
Finally got mine, they are the US release I guess, fewer parts. There is no stand or engines and of course the box art is different.
23 March 2022, 11:12
John Hart
Has anyone got any grand tips for this kit? I have just got one in my stash?
Has anyone got any grand tips for this kit? I have just got one in my stash?
15 December 2021, 14:15
Thomas Mayer
Four mates marked this kit as being in their stash. A kit that still has not been available! NOW I am curious...
Four mates marked this kit as being in their stash. A kit that still has not been available! NOW I am curious...
2 20 December 2020, 09:02
Thorsten Ungerechts
Maybe big thumps? Happens to me sometimes. But when I see it I change it and put it to the wishlist.
Maybe big thumps? Happens to me sometimes. But when I see it I change it and put it to the wishlist.
9 August 2021, 21:35
Kelly Pedron
YES! It's about time someone (besides Italeri/Testors) came out with a 1/48 SR! The Italeri/Testors SR is okay (I've built two of them so far), but the molds ARE 40 years old!
YES! It's about time someone (besides Italeri/Testors) came out with a 1/48 SR! The Italeri/Testors SR is okay (I've built two of them so far), but the molds ARE 40 years old!
All comments (6) » 2 5 August 2020, 01:27
Aaron Bennett
I'm really excited about it, but you're right, now may be the time to part with some of it. This is always a risk as a model collector I guess. A new tool bringing down the value of a once sought after kit. This has happened quite a bit to me recently. Trumpeter with their 1/48 Whirlwind really dropped the value of my Classic Airframes kits , Academy's 1/48 Huckbein took my AMTech kits way down, Modelcollects 1/72 B2 hurt my Testors stash, and now this. Please know I'm complaining at all here, I love new releases, just an interesting aspect of modeling.
I'm really excited about it, but you're right, now may be the time to part with some of it. This is always a risk as a model collector I guess. A new tool bringing down the value of a once sought after kit. This has happened quite a bit to me recently. Trumpeter with their 1/48 Whirlwind really dropped the value of my Classic Airframes kits , Academy's 1/48 Huckbein took my AMTech kits way down, Modelcollects 1/72 B2 hurt my Testors stash, and now this. Please know I'm complaining at all here, I love new releases, just an interesting aspect of modeling.
5 August 2020, 14:42
Gerry Sinks
Hello new guy here.
Has anyone heard anything new about this release?
Maybe delayed due to COVID?
Hello new guy here.
Has anyone heard anything new about this release?
Maybe delayed due to COVID?
20 February 2021, 22:42
Wrath
Awesome, now I can't wait for the "SR-17"! xD
Awesome, now I can't wait for the "SR-17"! xD
22 May 2020, 17:30
jimmy christy
revell is usually terrible with part fitting so this bette help there image or im getting a big revell poster and shooting it with a nerf gun
revell is usually terrible with part fitting so this bette help there image or im getting a big revell poster and shooting it with a nerf gun
29 June 2020, 14:41
Christian Ristits
Holy Sh***! What a great outlook to 2021 😉
Holy Sh***! What a great outlook to 2021 😉
31 January 2020, 08:35
Jeremy Wiltcher
I'm definitely looking forward to this one too, And I agree hopefully it goes much better than the 1/32 F/A-18E, and on time!
I'm definitely looking forward to this one too, And I agree hopefully it goes much better than the 1/32 F/A-18E, and on time!
31 January 2020, 12:34
Gluefinger
New tool 1:48 scale SR-71? Way to go, Revell! But please, please don't botch this up like the 1:32 scale F-18...
New tool 1:48 scale SR-71? Way to go, Revell! But please, please don't botch this up like the 1:32 scale F-18...
29 January 2020, 21:14
proiecte
Galerie
Material de referinta
Speed The Life of a Test Pilot and Birth of an American Icon
Bob Gilliland, Keith Dunnavant, Chesley Sulle...
2021 Toate cărțile » (32 in total) Toate miscarile » (22 in total)