Möbelwagen
3.7cm Flak auf Fgst. Pz.Kpfw. IV (Sf)
Border Model | N. BT-007 | 1:35
I fatti
- Marca:
- Border Model
- Titolo:
- Möbelwagen 3.7cm Flak auf Fgst. Pz.Kpfw. IV (Sf)
- Numero:
- BT-007
- Scala:
- 1:35
- Digita:
- Kit completo
- Messo in commercio:
- 2021 Nuove parti
- Codice a barre:
- 6971995749387 (EAN)
- Confezione:
- Scatola rigida (apertura superiore)
- Argomento:
- Flakpanzer IV Moebelwagen » Artiglieria semovente (Veicoli)
Insegne
Flakpanzer IV Moebelwagen
3.7 cm Flak auf Fgst. Pz.Kpfw. IV (Sf)
Waffen SS (1933-1945)
- FlaKArtAbt. 9, 9 SS-Pz.Div. Hohenstaufen
1945 World War 2
RAL7028 Dark Yellow with Whitewash
Wehrmacht Heer (German Army 1935-1945)
- HFlaKArtAbt. 277, 11 Pz.Div. Gespensterdivision
Ottobre 1944 World War 2
RAL7028 Dark Yellow RAL6003 Olive Green RAL8017 Red Brown
Contenuto della confezione
Dimensioni:
360x255x80 mm
(14.2x10x3.1 inch)
Boxart disegnato da Jason Wong
Genealogia
Border Model
Istruzioni
Scaricare 8564Kb (.pdf)
Mercato
No partner shops available
Recensioni in-box
Revisioni esterne
Annuncio pubblicitario
Revisione Modellbau-Koenig
Tutte le recensioni » (5 in totale)
Commenti
Juepak
5/10. A real disappointment - especially as it comes after finishing a Dragon Mid-Tiger and a RFM Panther F. Gaps all over the place. The gun carriage is fixed when it could very easily have been made moveable. The usual Border issue of one part being glued to another without any guide pins. Very poor instructions - multiple missing part numbers (the instructions show the part and the space for the number but it hasn't been filled in). Minimum detail on the IV chassis - for example the driver's viser is filled in - no transparent block, in fact no transparent parts. The barrel muzzel flash has to have the holes drilled (I used a add-on metal barrel instead). Usual very soft Border plastic - which ironically is a benefit given the multitude of injector marks that need to be filled. It comes across as a circa 1970s kit. Reminds me of the Border Crusader.
5/10. A real disappointment - especially as it comes after finishing a Dragon Mid-Tiger and a RFM Panther F. Gaps all over the place. The gun carriage is fixed when it could very easily have been made moveable. The usual Border issue of one part being glued to another without any guide pins. Very poor instructions - multiple missing part numbers (the instructions show the part and the space for the number but it hasn't been filled in). Minimum detail on the IV chassis - for example the driver's viser is filled in - no transparent block, in fact no transparent parts. The barrel muzzel flash has to have the holes drilled (I used a add-on metal barrel instead). Usual very soft Border plastic - which ironically is a benefit given the multitude of injector marks that need to be filled. It comes across as a circa 1970s kit. Reminds me of the Border Crusader.
9 May, 16:24