Grumman TF-9J Cougar

1
December 17, 2016
Holes for switches of 0,25 mm wire are good visible.
2
December 17, 2016
Kit-decals for the consoles applied over the etched panels for 3rd dimension. Switches of wire and knobs of round rod in place: 3rd dimension completed.
3
December 17, 2016
4
December 25, 2016
5
December 25, 2016
6
December 25, 2016
7
December 25, 2016
8
December 26, 2016
The fit of the windscreen is OK except a little step which had to be removed with 0,13 mm plastic.
9
December 28, 2016
10
December 28, 2016
11
January 2, 2017
12
January 2, 2017
13
January 2, 2017
14
January 2, 2017
15
January 2, 2017
16
January 2, 2017
17
January 2, 2017
18
January 3, 2017
19
January 3, 2017
20
January 12, 2017
21
January 12, 2017
22
January 12, 2017
23
January 12, 2017
24
January 15, 2017
Landing gear. The nose strut is too short and so I inserted a piece of tube. Unfortunately I lost a half of the nose wheel and had to replace them.
25
January 22, 2017
26
January 22, 2017
27
January 22, 2017
28
January 22, 2017
29
January 22, 2017
30
January 22, 2017
31
January 22, 2017
32
January 22, 2017
33
January 22, 2017
34
January 22, 2017
35
January 22, 2017
36
January 22, 2017
37
January 22, 2017

12 17 December 2016, 22:06

Spanjaard
looking good, i am in

25 December 2016, 21:39

Stefan Schacht
Hi Bernhard, good start, i take a seat. Cheers Stefan

25 December 2016, 22:00

e p
Right on time for the show... Nice start Bernhard.

25 December 2016, 22:26

Bernhard Schrock
Ad first sight is seams that the kit is "fine" but it has its pitfalls. For example the fuselage consists of 8 (8!!!) parts not counting the outer (foldable) wings. It took several hours to fix the lost panel lines after the an orgie of filling and sanding...

26 December 2016, 21:06

gorby
I'm ready to enrol for a new lesson in 'Bernhards school of modelling'.

27 December 2016, 16:12

Spitfire21
A ich seh schon das wird mal wieder ein echter Schrock! Bin schon sehr gespannt wies weiter geht!

28 December 2016, 11:16

Christian Ristits
Looks good to me, watching!

2 January 2017, 20:27

Hanno Kleinecke
Redmix rules ! 👍 😄

2 January 2017, 21:33

Bernhard Schrock
Painting nearly completed minus tail leading edges in "coroguard". I'm not too happy with the separation lines between orange and white on the wings... Maybe I mixed orange too matte 🙁
Walk ways:
After masking I airbrushed a thick coat (really thick) with unthinned paint (Humbrol) with very low pressure (0,7 bar). Approx. 5 min later I pressed 1500 micro mesh into the still wet paint and produced an uneven surface. This looks in my opinion very similar to the anti skid areas.

3 January 2017, 21:24

Bernhard Schrock
After one week of "hard work" 🙂 I'm nearly ready with the decaling. The Furball - decals are well printed, especially the white is very bright. But on the wings the national insignia (stars) should be applied over the border between orange and white. You can probably guess next problem: the orange colour was faintly visible through the white star. Fortunately the huge decal sheet offers full markings for two models so I could use spare parts of stars to patch up the problem (picture 23).

12 January 2017, 21:10

Michael Phillips
This is looking outstanding! That is some really awesome, crisp paintwork there. Love it!

12 January 2017, 21:12

gorby
WOW! Absolutely stunning Bernhard!

22 January 2017, 15:48

Bernhard Schrock
It was an curios project: it consisted to 1/3 of sanding & restoring of panel lines, to 1/3 of airbrushing and only to 1/3 of the normal staff🙂

22 January 2017, 15:56

Holger Kranich
Ja wat is nu denn? Ich habe ja garnicht mitbekommen das man hier schon wieder fertig ist! Sieht klasse aus und die Farben strahlen sehr schön!

22 January 2017, 16:14

Christian Ristits
Wunderschönes Modell, super Arbeit Bernhard!

22 January 2017, 16:50

Gary Brantley
Wow! fantastic modeling work Bernhard! 👍

22 January 2017, 17:04

Soeren R.
Really nice work!

22 January 2017, 17:36

Christian Bruer
Very nice and fast work Bernhard 👍

22 January 2017, 18:48

Hanno Kleinecke
This orange-white scheme is very pretty, what a sight !

22 January 2017, 19:19

Martin Oostrom
That's stunning!

22 January 2017, 19:24

Stefan Schacht
Hallo Bernhard, very nice model, hope to see it on the Euro Model Expo. Cheers Stefan

22 January 2017, 20:01

Bernhard Schrock
Thank you mates! I'm very glad that you like the orange cat! By the way: the white is not a 100% white but in reality a very light gray. And my international orange consists in reality a little bit of fluorescent orange (H209) because I was so enthusiastic to see the result on my Hellcat drone. Despite of 6 several fluids (incl. the Tamiya decal adhesive fluid) I had very big trouble to avoid silvering: it took one whole week just applying the decals.
Stefan: the Cougar will go to Lingen. By the way: Hanno and I will take both Hallcat-Drones to Lingen.

22 January 2017, 20:08

Holger Kranich
Cool, dann sehen wir uns in Lingen!

23 January 2017, 08:56