Grumman J2F-5 Savedduck
1
December 5, 20182
December 6, 2018New generation of wiring lines....3
December 8, 20184
December 8, 20185
December 8, 20186
December 11, 20187
December 11, 20188
December 11, 20189
December 11, 201810
December 11, 201811
December 11, 201812
December 18, 201813
December 18, 201814
December 18, 201815
December 21, 201816
December 28, 201817
December 28, 201818
December 28, 201819
January 3, 201920
January 3, 201921
January 5, 201922
January 5, 201923
January 5, 201924
January 6, 201925
January 6, 201926
January 6, 201927
January 7, 2019Cut out in the fuselage closed because incorrect.28
January 7, 2019All 4 landing gear attachment points are incorrect designed.29
January 7, 2019Oversized openings closed.30
January 8, 2019New research results: the front of the fuselage is completely wrong. The very forward area must be removed for correct installation of the cowling.31
January 8, 2019Tail wheel: unfortunately this area is designed completely wrong and must be constructed from scratch.32
January 8, 2019Tail wheel support arm should be mounted on the fuselage spar and not on the movable doors.33
January 8, 201934
January 8, 201935
January 11, 2019Corrected wheel bay area and strut support.36
January 11, 201937
January 11, 2019Source: sea wings38
January 11, 2019Source: sea wings39
January 12, 201940
January 12, 201941
January 12, 201942
January 12, 201943
January 13, 201944
January 14, 2019The windscreen is wrong: compare with picture 48.45
January 14, 201946
January 14, 201947
January 14, 2019Another art of "modeling": original ciabatta in 1:1 scale🙂48
January 15, 2019Windscreen should have 4 and not 3 pieces of glass. The front edge is sharp and not round as in the kit.49
January 15, 2019Maintenance step, bulge on the fuselage and STRAIGHT Panel around wheel bay.50
January 15, 2019No maintenance stap, no bulge, curved panel and wrong shape of the front panel (with cooler opening).51
January 15, 2019Step, bulge and....🙁🙁🙁 argh!52
January 17, 201953
January 17, 201954
January 17, 2019Corrected oil cooler inlet: the vanes are now inside.55
January 17, 2019Maintenance step: ok. Bulge: ok. Straight line of the wheel bay: ok.56
January 17, 2019Windscreen with 4 panels: ok. Sharp edge: 1/3 ok too much work to correct it 100%.57
January 19, 201958
January 19, 201959
January 19, 201960
January 22, 201961
January 24, 2019Painting completed minus black area on the wings near the fuselage. 1st weathering task completed.62
January 24, 2019Airbrushing the ruder produced better result than applying the decal. The forward corner not painted Blut grey jet.63
January 24, 201964
January 28, 201965
January 28, 2019soft edge between grey and blue gray.66
January 28, 2019Ruder is now ready painted. Just noticed that the very prominent counterweights on the prop are not present in the kit.67
February 2, 201968
February 2, 2019Navy letters in old style: base for new decals.69
February 6, 201970
February 6, 201971
February 8, 201972
February 9, 2019Brass tubing: wire antenna (Schleppantenne) “outlet”.73
February 9, 2019?? Knows anybody what function have this tube? The duck do not have forward firing guns...74
February 9, 2019Counter weights added to the prop hub.75
February 9, 2019MV - products lens.76
February 9, 201977
February 10, 2019I forgot the wrong position of rear strut (wing site).78
February 11, 2019After correcting the bug and before painting.79
February 11, 201980
February 11, 2019After correcting and repainting.81
February 11, 201982
February 11, 201983
February 11, 201984
February 12, 201985
February 12, 201986
February 13, 2019Spread bar added.87
February 13, 201988
February 16, 201989
February 16, 201990
February 16, 201991
February 16, 201992
February 16, 201993
February 16, 201994
February 16, 201995
February 16, 201996
February 16, 201997
February 16, 201998
February 16, 201999
February 16, 2019100
February 16, 2019101
February 16, 2019102
February 16, 2019103
February 16, 2019104
February 16, 2019105
February 16, 2019
Коментарі
9 September 2024, 00:19 -