Supermarine "Super-Stranraer", Queen Charlotte Airlines, CF-BYM (completed: picture 158)
1
March 8, 20152
March 8, 20153
March 8, 20154
March 9, 20155
March 9, 20156
March 9, 20157
March 11, 20158
March 11, 20159
March 11, 201510
March 12, 201511
March 12, 20155 minutes and one 0,4 mm drill later than last picture: the ruder was easily broken of (just like the drill🙂12
March 13, 201513
March 15, 201514
March 15, 201515
March 15, 201516
March 15, 201517
March 15, 201518
March 20, 2015The Super Stranraer has a larger housing for the oil cooler.19
March 20, 2015Courtesy😄ieter Bihlmaier20
March 20, 2015Oil cooler in place.21
March 20, 2015Unfortunately I made a mistake when mounting the oil coolers: wrong side because the struts are not in the middle but of axis.22
March 21, 2015One hour later than last picture.23
March 21, 2015The wiring is connected on the nacelle-struts, not on the wing.24
March 31, 2015All three wing sections glued together. The fit was average.25
March 31, 201526
March 31, 201527
March 31, 2015The two auxiliary holes for applying CA-glue from the outside are well visible. They will be covered by the nacelles.28
April 2, 201529
April 2, 201530
April 2, 2015As usually no putty but CA-glue and plastic as filler for the gaps between the nacelles and wing.31
April 2, 2015Corrected attachment points for the struts (only 3, the fourth is wider and has an another attachment).32
April 7, 201533
April 7, 201534
April 9, 2015Left: correct position of the ignition ring. Right: false position of the ignition ring.35
April 10, 2015Parts for the exhaust stacks & collector ring.36
April 10, 2015it is necessary to made two rectangular openings for the carburetors.37
April 10, 2015First look: the engine fits. For fit of the "larger" aires engine it is necessary to remove the "rectangular block" on the top of inner side of the nacelle.38
April 10, 201539
April 10, 2015Left engine @ cowling in place minus exhaust pipe on the outer side.40
April 11, 2015I was stunned: it was impossible to mix the correct lemon yellow (matching the dacal) from white and yellow. It was necessary to use lime green too. Approx. 1/4 lime green, 1/4 trainer yellow and 1/2 white produced the correct color.41
April 12, 201542
April 12, 201543
April 12, 201544
April 12, 201545
April 14, 201546
April 14, 201547
April 14, 201548
April 14, 201549
April 19, 2015Landing light phase 1: 2 lenses from MV-products glued in a cutout in the leading edge.50
April 19, 2015Phase 2: glazing from Tesafilm, cut to the right shape with a little border. Right side: landing light "holder" from rod.51
April 19, 2015Phase 3: a piece of Tamiya tape in place (cut in the correct shape external).52
April 19, 201553
July 17, 201554
July 17, 201555
July 17, 201556
July 17, 201557
July 18, 201558
July 18, 201559
July 20, 201560
July 20, 201561
July 20, 201562
July 20, 201563
July 23, 201564
July 23, 201565
July 23, 201566
November 25, 201567
November 25, 201568
November 27, 201569
November 27, 201570
November 27, 201571
November 27, 201572
November 29, 201573
November 29, 201574
November 29, 201575
November 29, 201576
November 30, 201577
November 30, 201578
December 3, 201579
December 3, 201580
December 3, 201581
December 4, 201582
December 4, 2015Courtesy Dieter Bihlmaier83
December 8, 201584
December 8, 201585
December 8, 201586
December 8, 201587
December 10, 201588
December 10, 201589
December 12, 201590
December 12, 201591
December 12, 201592
December 13, 201593
December 13, 201594
December 13, 201595
December 13, 201596
December 14, 201597
December 14, 201598
December 14, 201599
December 14, 2015100
December 14, 2015101
December 15, 2015102
December 15, 2015103
December 15, 2015104
December 17, 2015105
December 17, 2015106
December 17, 2015107
December 17, 2015108
December 17, 2015109
December 17, 2015110
December 18, 2015111
December 18, 2015112
December 18, 2015113
December 19, 2015114
December 19, 2015115
December 19, 2015116
December 19, 2015117
December 20, 2015Left: two wheel halves from the kit. Right: modified Hi Tech wheels & scratch parts for the correct wheels.118
December 20, 2015Completed wheels.119
December 21, 2015120
December 21, 2015121
December 21, 2015122
December 22, 2015123
December 22, 2015124
December 22, 2015125
December 22, 2015126
December 23, 2015Nothing looks more like brass than - brass!127
December 21, 2015128
December 23, 2015129
December 23, 2015Courtesy Dieter Bihlmeier130
December 30, 2015131
December 30, 2015132
December 30, 2015133
December 31, 2015134
December 31, 2015135
December 31, 2015136
December 31, 2015137
December 31, 2015138
January 1, 2016"Short" wiring (from guitar wire 0,22 mm) in place.139
January 1, 2016140
January 1, 2016Wiring from guitar wire: it works very well but most important is the fact that each wire can only be glued on ONE side.141
January 2, 2016142
January 2, 2016143
January 2, 2016144
January 3, 2016145
January 3, 2016146
January 3, 2016147
January 3, 2016148
January 4, 2016149
January 4, 2016150
January 4, 2016151
January 4, 2016152
January 4, 2016153
January 4, 2016154
January 4, 2016155
January 6, 2016156
January 7, 2016157
January 7, 2016158
January 7, 2016159
January 7, 2016160
January 7, 2016161
January 7, 2016162
January 7, 2016163
January 7, 2016164
January 7, 2016165
January 7, 2016166
January 7, 2016167
January 7, 2016168
January 7, 2016169
January 7, 2016170
January 7, 2016171
January 7, 2016172
January 7, 2016173
January 7, 2016174
January 7, 2016175
January 7, 2016176
January 7, 2016177
January 7, 2016178
January 7, 2016179
January 8, 2016180
January 8, 2016181
January 10, 2016182
January 11, 2016183
January 11, 2016184
January 11, 2016185
January 11, 2016
Коментарі
9 September 2024, 00:17 -