USS Montana (BB-67)

1
January 22, 2022
170703: Box & Contents
2
January 22, 2022
170703: Box & Contents
3
January 22, 2022
170703: Box & Contents
4
January 22, 2022
170703: Box & Contents
5
January 22, 2022
170703: Box & Contents
6
January 22, 2022
170706: BB67 Base and mounting.
7
January 22, 2022
170706: BB67 Base and mounting.
8
January 22, 2022
170706: BB67 Base and mounting.
9
January 22, 2022
170706: BB67 Base and mounting.
10
January 22, 2022
170711: Masking the boot topping.
11
January 22, 2022
170711: Masking the boot topping.
12
January 22, 2022
170711: Measure 22 masking (MM 5-H over PS 5-N)
13
January 22, 2022
170711: Measure 22 masking (MM 5-H over PS 5-N)
14
January 22, 2022
170711: Measure 22 masking (MM 5-H over PS 5-N)
15
January 22, 2022
170712 BB67 Hull basic assembly
16
January 22, 2022
170714 BB67 Hull Paint (Note boot topping width markers)
17
January 22, 2022
170714 Priming the PE with acid-based (self-etching) primer
18
January 22, 2022
170717 BB67 Ground tackle (Chain is provided in the kit)
19
January 22, 2022
170717 BB67 Ground tackle chain plates
20
January 22, 2022
170720 BB67 Initial PE assembly
21
January 22, 2022
170720 BB67 Initial PE assembly
22
January 22, 2022
170720 BB67 checking plumb on fore mast
23
January 22, 2022
170721 BB67 Wood decking
24
January 22, 2022
170721 BB67 Closing up the hull
25
January 22, 2022
170721 BB67 Progress overview
26
January 22, 2022
170721 BB67 Progress overview
27
January 22, 2022
170721 BB67 Progress overview
28
January 22, 2022
170721 BB67 Progress overview
29
January 22, 2022
170721 BB67 Progress overview
30
January 22, 2022
170721 BB67 hull markings
31
January 22, 2022
170721 BB67 hull markings
32
January 22, 2022
170802 BB67 Progress Odd-looking secondary battery are 5"/54 twins.
33
January 22, 2022
170806, BB67: The one problematic seam in the kit. As it turns out, it is pretty much invisible once trunks leading up to the secondary battery directors are in place.
34
January 22, 2022
170809 01-level PE and other PE assemblies.
35
January 22, 2022
170809 01-level PE and other PE assemblies.
36
January 22, 2022
170809 01-level PE and other PE assemblies.
37
January 22, 2022
170809 01-level PE and other PE assemblies.
38
January 22, 2022
170810 BB67 Production Status
39
January 22, 2022
170810 BB67 Production Status
40
January 22, 2022
170810 BB67 Production Status. Case represents 10+ hours
41
January 22, 2022
170811 BB67 PE Subassemblies
42
January 22, 2022
170811 BB67 PE Subassemblies
43
January 22, 2022
170816: PE catwalks have no supporting structure to aid alignment - I retained part of the fret to stabilize them.
44
January 22, 2022
170816 PE subassemblies: B&A Crane
45
January 22, 2022
170817 BB67 PE Main Battery director
46
January 22, 2022
170817 BB67 PE Main Battery director
47
January 22, 2022
170908: Installing the Main Deck railings
48
January 22, 2022
170928: 20mm assembly is in two parts, with separate PE shield.
49
January 22, 2022
170928: 20mm assemblies in place.
50
January 22, 2022
170928: PE antennae for SK-2 and for FC radars.
51
January 22, 2022
170928: PE rails are near-perfect fit. Kit includes blackened anchor chain, too.
52
January 22, 2022
170928: Scout aircraft are sourced from Tamiya BB-63 sprues.
53
January 22, 2022
54
January 22, 2022
55
January 22, 2022
56
January 22, 2022
57
January 22, 2022
58
January 22, 2022
59
January 22, 2022
60
January 22, 2022
61
January 22, 2022
62
January 22, 2022
63
January 22, 2022
64
January 22, 2022
65
January 22, 2022
66
January 22, 2022
67
January 22, 2022
68
January 22, 2022
69
January 22, 2022
70
January 22, 2022
71
January 22, 2022
72
January 22, 2022
73
January 22, 2022
74
January 22, 2022
75
January 22, 2022
76
January 22, 2022
77
January 22, 2022
78
January 22, 2022
79
January 22, 2022

Yorumlar

11 22 January 2022, 00:11

Rui S
I admire this. Nice & Clean build

22 January 2022, 17:43

Album info

USS Montana (BB-67) from 2017 kit by Very Fire (1/700).
Depicts USS MONTANA (BB-67) as designed, July 1942.

The name Montana was assigned to BB-67 on 28 December 1940; but construction of the Montana class (BB-67/71) was canceled 21 July 1943, before her keel was laid by Philadelphia Navy Yard.

This excellent kit from a new manufacturer was very complete, with PE railings and accessories, wood decking, and blackened anchor chain all included. Build is out of the box with minor enhancements:

- Scratched display base and acrylic case
- Scout aircraft replaced with Curtiss SC Seahawk
- Minor alterations (e.g. brass, aluminium rod to replace masts, etc.)

USS Montana (BB-67)

79 Görüntüler

1:700

Tamamlanan

Tüm albümler

Tüm albümleri görüntüle »