paper modeling database | Менаџер залиха
Booze
Holger Kranich (Booze)
DE

Wiesel MK 20

Коментари

5 September 2015, 16:57
Stephan Ryll
very nice build!
5 September 2015, 19:23
Roberto Rocat
Never seen this machine...nice work.
5 September 2015, 20:43
Robert
As a big fan of the RH202, I have to say, this is a damn good piece. I'd like to build a Wiesel, but its so small.
5 September 2015, 20:51
Jonns Pfeiffenberger
👍 👍 schön geworden der Kleine!
5 September 2015, 22:49
Clifford Keesler
Nice one Holger.
5 September 2015, 23:06
Es-haq Khosravi
Great job!!
5 September 2015, 23:27
Holger Kranich
Hey dudes, the for your comments! It was mostly a pleasure to build!
6 September 2015, 06:48
John Van Kooten
That is really nice work, Holger! Sehr schön! It looks very convincing 👍 👍
6 September 2015, 07:38
Mike Kryza
Einwandfrei Holly! - 👍
6 September 2015, 07:54
Christian Meyerhoff
Wenn Nebel aus den Wiesen steigt, die Fledermaus das Wiesel geigt... 🙂
Excellent work Holger!
How is the quality compared to the Revell Kit ?
6 September 2015, 07:55
Holger Kranich
Thanks guys!🙂
Except for the pe's and the running gear, the Revell kit is far better! Fit is good with both kits. They are both recommendable!🙂
6 September 2015, 10:13
Acki
Süß! Nee, im Ernst: Super gemacht!
6 September 2015, 18:28
Holger Kranich
Ist wirklich süß, der Kleine😢 Danke Acki!
7 September 2015, 06:59
Arne Greve
Da ist er ja! So klein, das man ihn kaum sieht. Wirklich gute Arbeit, Holger!!
7 September 2015, 10:25
Holger Kranich
Danke Arne! 🙂 Gerade das Pe bashing hat Spaß gemacht! Einige Ätzteile hatte ich noch vom AFF, die habe ich gleich mit verbaut.
7 September 2015, 14:43
Arne Greve
Fällt überhaupt nicht auf. ;-D
7 September 2015, 14:58
Christian Bruer
Well done Holger!
7 September 2015, 17:37
Hanno Kleinecke
Sieht astrein aus der Lütte !
7 September 2015, 19:38
Holger Kranich
Christian, Hanno, thank you very very much buddys!😄
9 September 2015, 10:34
Joerg R.
So klein und darf schon Panzer sein? An den Wieseln hast du irgendwie nen Narren gefressen 🙂🙂🙂 Sehr schön einzig die Verstaubung gerade an der Gurtzuführung wirkt mir etwas unhomogen zum Rest des Panzers ansonsten 👍👍👍
9 September 2015, 15:46
Holger Kranich
Hi Jörg,

herzlichen Dank! Die "Verstaubung" ist ein lediglich zu starkes drybrushing mit Silber. Wollte ein paar Lackabplatzer simulieren aber da hab ich etwas übertrieben, wollte das dann aber auch nicht mehr ändern.🙂

Und ja, ich liebe meine Wieselchen😄
9 September 2015, 15:56
Kim Branders
👍 Grtz.
10 September 2015, 11:24
Holger Kranich
Thx Kim!
16 September 2015, 11:12
Lauri Maalismaa
Beautiful! How did you do the sand/dust on the frontal armor?
11 March 2016, 15:47
Choppa Nutta
Now that does look cool Holly !!
It has an air of Warhammer 40K about it or some similar Sci Fi 🙂
11 March 2016, 15:57
Hobel Ramon
Tolles Modell! Sieht sehr schön aus. Und was sehe ich, auch noch ein Wiesel vom FschJgBtl. 313. Na das find ich ja extra klasse ^^
11 March 2016, 17:27
Holger Kranich
From the measurements it really looks like warhammer, its so tiny!😄

Treue um Treue, Hobel! 313, meine Heimat! Hab den Wiesel so dargestellt wie ich Ihn von der Wildeshausener 5./ in Oldenburg bei der HvT Kaserne gesehen habe. Glück ab!😄

12 March 2016, 12:43
Choppa Nutta
I want to remove the turret and stick it on a pair of AT-ST legs 😄
12 March 2016, 13:59
Holger Kranich
That would probably fit and look well! 😄
12 March 2016, 15:59
Choppa Nutta
I just really like the face the turret has, squat mean and moody 🙂
I would probably widen the hips so the legs had a much wider stance, as wide as the turret itself for that hint of ape like cowboy kinda thing 😄
12 March 2016, 16:01
Joey M
Hi Holger, your Wiesel is really well done 🙂 nice work.
I was wondering though, was there anything about the AFV kit that you didnt like? Now that your's is finished were there any PE, Resin or Metal upgrade sets that you think would be worth having for the build? I've really been thinking of getting one lately and really wanted to ask someone who has built one.

Thanks bud!
19 January 2017, 21:23
Holger Kranich
Hi Joey,

thank you very much!🙂 In this case i build just oob. The barrel is ok and dont need to be replaced. The tracks are made of rubber but thats absolutely ok. Wiesel track dont sag. Pe´s are from the box and you can work fine with ´em. I would only recommend some pe´s for the engine grill and the exhaust. On my Revell AFF Wiesel, i used the Revell/Eduard pe set which contains the necessary pe´s.
I definately recommend this kit! Its a quick build wit excellent fit! And dont wonder, on some of the sprues you can read: "Revell", as they wanted to rebox it but never did. If you have any further questions - just ask😢

Cheers😄
20 January 2017, 08:57
Bart Goesaert
Looks good... It's a tiny thing, but a very nice one...
20 January 2017, 09:48
Clifford Keesler
Nice one Holger.
23 January 2017, 19:30
Holger Kranich
Bart, Clifford sorry, i just saw your comments - THX for ´em! 😄
25 July 2017, 12:30

Project info

21 слике
1:35
Завршено
1:35 Wiesel 1A1/A3 MK20 (AFV Club AF35275)1:35 Wiesel 2 LeFlaSys AFF (Revell 00719)

Сви албуми

Прикажи све албуме »