Pinkie Pie
Komentáre
62 2 December 2022, 21:55
Alex K
Following with great interest... Have it in my stash but not brave enough for it yet... (Also: I second Andy's comment - but I respect your choice!)
Following with great interest... Have it in my stash but not brave enough for it yet... (Also: I second Andy's comment - but I respect your choice!)
3 December 2022, 08:22
Łukasz Gliński
The original decals are far too yellow to use them, so neither Greek nor Oman version is planned.
The aim is to use 26decals set for the pink Barra visitor.
Perfect timing me thinks as magenta has been selected the colour of 2023 😋
The original decals are far too yellow to use them, so neither Greek nor Oman version is planned.
The aim is to use 26decals set for the pink Barra visitor.
Perfect timing me thinks as magenta has been selected the colour of 2023 😋
3 December 2022, 08:22
Alex K
Just for the info: For anyone having trouble with the original Airfix, and by now yellowed, Olympic decals, LM decals has issued this set: Olympic Aviation Short SC.7 Skyvan (LM Decals LMX 0093, 1:72) . But a Barra visitor will be a nice companion to your Twin Otter - good idea! 👍
Just for the info: For anyone having trouble with the original Airfix, and by now yellowed, Olympic decals, LM decals has issued this set: Olympic Aviation Short SC.7 Skyvan (LM Decals LMX 0093, 1:72) . But a Barra visitor will be a nice companion to your Twin Otter - good idea! 👍
3 December 2022, 08:30
Robert Podkoński
It is great to see it assembled finally - more so when it is such a good, dedicated modeller as you 🙂
It is great to see it assembled finally - more so when it is such a good, dedicated modeller as you 🙂
3 December 2022, 11:05
Łukasz Gliński
Welcome mates!
Gary, you might be surprised, but it's all straight out of the box
Welcome mates!
Gary, you might be surprised, but it's all straight out of the box
4 December 2022, 18:48
Cuajete
Łukasz, I'm sorry to tell you that that color looks horrible, but you can count on my axe 😄 😛
I can't miss this either. I'm sure you'll do a great job once again 😉
Łukasz, I'm sorry to tell you that that color looks horrible, but you can count on my axe 😄 😛
I can't miss this either. I'm sure you'll do a great job once again 😉
5 December 2022, 18:50
Łukasz Gliński
Welcome once again, quite an audience is gathering 😉
Currently considering how and when to rescribe and rerivet the flying shoebox, while working on the interior.
@Cuajete: Wasn't it the Barraigh visitor, I'd go for plan B: 😛
[img1]
Welcome once again, quite an audience is gathering 😉
Currently considering how and when to rescribe and rerivet the flying shoebox, while working on the interior.
@Cuajete: Wasn't it the Barraigh visitor, I'd go for plan B: 😛
[img1]
6 December 2022, 09:06
Mirko Römer
This is going to be a nice and colourful easter egg! ...errr...wait...December...
This is going to be a nice and colourful easter egg! ...errr...wait...December...
7 December 2022, 19:44
Łukasz Gliński
Small update - cabin and flight deck are ready. Mapped the rivets today just to sand smooth the fuselage and to find out the mapping is in the instructions too 😮 Well done, Airfix!
Next turn: adding the Skyliner door.
Small update - cabin and flight deck are ready. Mapped the rivets today just to sand smooth the fuselage and to find out the mapping is in the instructions too 😮 Well done, Airfix!
Next turn: adding the Skyliner door.
18 December 2022, 20:31
Łukasz Gliński
Well, I played a bit with my Revell riveter on the Condor lately and really liked the way it works (though not the most pro riveter out there). My first kit to be re-riveted, hope it's gonna be fun. 🙂
PS. I'm gonna simplify the layout for sure 😄
Well, I played a bit with my Revell riveter on the Condor lately and really liked the way it works (though not the most pro riveter out there). My first kit to be re-riveted, hope it's gonna be fun. 🙂
PS. I'm gonna simplify the layout for sure 😄
18 December 2022, 21:18
Alec K
With that boxy shape, riveting should be fun. I must admit, there is something cathartic about doing that… 😄
With that boxy shape, riveting should be fun. I must admit, there is something cathartic about doing that… 😄
19 December 2022, 13:10
Juergen Klinglhuber
riveting a shoe box ?...perfect to calm down after christmas rush 😉
Nice build Lukasz - love the kit and aircraft (did mine without extra riventing operations once - but I am sure it's worth the extra efforts!)
riveting a shoe box ?...perfect to calm down after christmas rush 😉
Nice build Lukasz - love the kit and aircraft (did mine without extra riventing operations once - but I am sure it's worth the extra efforts!)
20 December 2022, 07:06
Łukasz Gliński
Looks like you really like my shoebox already 😄
Alec I hope riveting will be more zen-ish than sanding and filling 😛
Juergen, yours and Roland's are my benchmark and reference 👍
Looks like you really like my shoebox already 😄
Alec I hope riveting will be more zen-ish than sanding and filling 😛
Juergen, yours and Roland's are my benchmark and reference 👍
20 December 2022, 21:06
Gordon Sørensen
Nice looking interior, Lucasz! Please show some detail photos of the riveter and how to use it. Interested in seeing your technique.
Nice looking interior, Lucasz! Please show some detail photos of the riveter and how to use it. Interested in seeing your technique.
21 December 2022, 04:43
Łukasz Gliński
Welcome Gordon, I have no special tooling, just the simple Revell riveter:
Rivet Maker (Revell 39076, No)
Will report the riveting, once I start it, stay tuned.
Meanwhile it has been a productive weekend, I managed to start the shoebox assembly by forcing the parts to cooperate 😉
So far the fit is not bad, except for the rear loading ramp, but I had to reinforce the ceiling, so we'll see how it goes.
Welcome Gordon, I have no special tooling, just the simple Revell riveter:
Rivet Maker (Revell 39076, No)
Will report the riveting, once I start it, stay tuned.
Meanwhile it has been a productive weekend, I managed to start the shoebox assembly by forcing the parts to cooperate 😉
So far the fit is not bad, except for the rear loading ramp, but I had to reinforce the ceiling, so we'll see how it goes.
1 January 2023, 19:46
Andy Ball
How many kg/sqcm did you raise the pressure to to get that lot to go together? Looks like you're putting down some strong foundations which will benefit you in the final article
How many kg/sqcm did you raise the pressure to to get that lot to go together? Looks like you're putting down some strong foundations which will benefit you in the final article
1 January 2023, 20:31
Łukasz Gliński
I haven't measured the lbs/sqft, but a lot was needed. 😛
As you stated A., I hope it's gonna be a base robust enough to carry all the other parts attached later.
I haven't measured the lbs/sqft, but a lot was needed. 😛
As you stated A., I hope it's gonna be a base robust enough to carry all the other parts attached later.
1 January 2023, 21:32
Łukasz Gliński
I started the cockpit and gosh what a terrible fit 😮
I managed to break the windshield (not such a big issue as I can add a flat ersatz. Still the corners had to be squeezed a lot (no idea how may pounds per sq foot 😉 )
The right part took some black glue, but I think I'll leave it as is, I have no glue, ekhm, clue how to make it not to touch the dashboard, tried couple of times and nothing helps 🙁
I started the cockpit and gosh what a terrible fit 😮
I managed to break the windshield (not such a big issue as I can add a flat ersatz. Still the corners had to be squeezed a lot (no idea how may pounds per sq foot 😉 )
The right part took some black glue, but I think I'll leave it as is, I have no glue, ekhm, clue how to make it not to touch the dashboard, tried couple of times and nothing helps 🙁
19 January 2023, 20:52
Łukasz Gliński
You seem to have a lot of faith in my skills 😄
I couldn't sleep soundly last night, so I had to remove the right side glazing and will redo it tonight, stay tuned.
You seem to have a lot of faith in my skills 😄
I couldn't sleep soundly last night, so I had to remove the right side glazing and will redo it tonight, stay tuned.
20 January 2023, 13:17
Łukasz Gliński
Attempt 2 finished, pics uploaded. Middle part comes from RWD-5 spares 😄 Still not happy, got some damn bubbles inside, planning to cut it and correct once again.
Slowly a vacuform part production started popping up in my head 😉
Attempt 2 finished, pics uploaded. Middle part comes from RWD-5 spares 😄 Still not happy, got some damn bubbles inside, planning to cut it and correct once again.
Slowly a vacuform part production started popping up in my head 😉
24 January 2023, 21:40
Patryk S.
Following! Looks like a tough one but you will prewail as always. It's tough for me to judge without seeing the clear parts live but maybe an attempt at sanding the parts a bit thinner and treating them with tamiya compoud would improove the clarity somwewhat and reduce the visibility of the seams where You attached the RWD-5 parts? Oh no! Now I get it! You are preparing to tackle the Czapla, admit it! 😜
Following! Looks like a tough one but you will prewail as always. It's tough for me to judge without seeing the clear parts live but maybe an attempt at sanding the parts a bit thinner and treating them with tamiya compoud would improove the clarity somwewhat and reduce the visibility of the seams where You attached the RWD-5 parts? Oh no! Now I get it! You are preparing to tackle the Czapla, admit it! 😜
24 January 2023, 22:06
Bernd Grün
Oh Lukasz, Ithink it's a hard fight with that kit. But I think you will master this challenge too. 😉
Oh Lukasz, Ithink it's a hard fight with that kit. But I think you will master this challenge too. 😉
24 January 2023, 22:07
Łukasz Gliński
It's a hard fight indeed, I started to bend various transparent plastic sheets 😉
@Patryk, Czapla's on my to-do-list of course. I even have one of the later editions stashed somewhere 😄
It's a hard fight indeed, I started to bend various transparent plastic sheets 😉
@Patryk, Czapla's on my to-do-list of course. I even have one of the later editions stashed somewhere 😄
25 January 2023, 12:20
Cuajete
Łukasz, I know that in the end you will resort to the helpful UV glue 😉 😛
You can do it... Cheer up! 💪
Łukasz, I know that in the end you will resort to the helpful UV glue 😉 😛
You can do it... Cheer up! 💪
25 January 2023, 19:58
Łukasz Gliński
Wish I could amigo, but the hole is waaaay too big 🙁
Wasn't it a gift, I'd already be considering flying it straight into the dustbin 😉
Wish I could amigo, but the hole is waaaay too big 🙁
Wasn't it a gift, I'd already be considering flying it straight into the dustbin 😉
25 January 2023, 20:46
Ralf Topeters
That's quit a challenge. I'm looking forward to see the outcome. 👍
That's quit a challenge. I'm looking forward to see the outcome. 👍
25 January 2023, 22:19
Gary Kitchen
This seems to be the very definition of perseverance to me. Admirable stuff Lukasz.
This seems to be the very definition of perseverance to me. Admirable stuff Lukasz.
26 January 2023, 10:36
Cuajete
This could be a candidate for the relaunch program of the classic Airfix kits, like Heron, Basset, Beaver, and so on...
This could be a candidate for the relaunch program of the classic Airfix kits, like Heron, Basset, Beaver, and so on...
26 January 2023, 19:12
Łukasz Gliński
That would be nice indeed, then I could buy another one just to copy the canopy (oh no, I started to rhyme again) 😉
I think I need a break (e.g for a XXI century Airfix project)
That would be nice indeed, then I could buy another one just to copy the canopy (oh no, I started to rhyme again) 😉
I think I need a break (e.g for a XXI century Airfix project)
26 January 2023, 19:22
Łukasz Gliński
So, I went for the vacu option after all. The second attempt seems v.promising, now I need to find a strong glue.
So, I went for the vacu option after all. The second attempt seems v.promising, now I need to find a strong glue.
18 February 2023, 15:24
S M
Lots of set backs, but now you have windshield in place. Was that uv-resin any good?
Lots of set backs, but now you have windshield in place. Was that uv-resin any good?
8 March 2023, 19:10
Łukasz Gliński
Very slowly, but onwards indeed 😄
I find that UV thing very interesting, probably it's a kind of nail hybrid, at least my wife says it's very similar 😄
It's thinner than CA glue, almost like a varnish. Dries quite quickly (1-2 mins in UV nail tool I've got). Afterwards it's hard and sandable.
If you're lazy (I definitely am!) you can add a thin layer on top after sanding and it's clear again 🙂
And if you screwed anything and the surface underneath was relatively smooth, you can lift a corner with a sharp knife and simply peel it off.
Then you're back to square one and can repeat.
Very slowly, but onwards indeed 😄
I find that UV thing very interesting, probably it's a kind of nail hybrid, at least my wife says it's very similar 😄
It's thinner than CA glue, almost like a varnish. Dries quite quickly (1-2 mins in UV nail tool I've got). Afterwards it's hard and sandable.
If you're lazy (I definitely am!) you can add a thin layer on top after sanding and it's clear again 🙂
And if you screwed anything and the surface underneath was relatively smooth, you can lift a corner with a sharp knife and simply peel it off.
Then you're back to square one and can repeat.
9 March 2023, 09:06
Alec K
Good info on that resin. So it's hand and sandable when UV cured, and pliable (I.e. you can peel it off) when just air dried?
Good info on that resin. So it's hand and sandable when UV cured, and pliable (I.e. you can peel it off) when just air dried?
9 March 2023, 12:13
Łukasz Gliński
Not exactly - all 3 apply to UV cured resin (hardness, sandability & pliability).
When not cured, you can just wipe it off.
Not exactly - all 3 apply to UV cured resin (hardness, sandability & pliability).
When not cured, you can just wipe it off.
9 March 2023, 12:50
Michael Jonker
This looks almost like it will be easier to scratch build 🙂
Good luck, can't wait to see it reveal.
This looks almost like it will be easier to scratch build 🙂
Good luck, can't wait to see it reveal.
9 March 2023, 14:57
Łukasz Gliński
Welcome back - after multiple iterations of riveting and sanding and re-riveting I decided to take a different approach and use the rivet decals instead.
Yes, trying to rivet the thing took me all that time since the last update 🙂
Many thanks for your support 🙂 I might have given up otherwise 👍
Scratchbuilding might be even better as I lost the geometry a bit on the fuselage 🤔
Welcome back - after multiple iterations of riveting and sanding and re-riveting I decided to take a different approach and use the rivet decals instead.
Yes, trying to rivet the thing took me all that time since the last update 🙂
Many thanks for your support 🙂 I might have given up otherwise 👍
Scratchbuilding might be even better as I lost the geometry a bit on the fuselage 🤔
8 October 2023, 09:21
Robert Podkoński
Good to see that this pretty thing landed back on your bench, Łukasz 😉 Keep it up!
Good to see that this pretty thing landed back on your bench, Łukasz 😉 Keep it up!
8 October 2023, 09:29
Michael Kohl
I cross my fingers that this will be one of those models where you fight yourself through all the problems and through troughs of frustration to finally look at it in satisfaction.
Keep it going.
I cross my fingers that this will be one of those models where you fight yourself through all the problems and through troughs of frustration to finally look at it in satisfaction.
Keep it going.
8 October 2023, 09:43
Michael Kohl
I embraced the rivet decals enthusiastically but found my experiences a bit sobering as the carrier film is quite visible and you cannot really hide it without hiding the details too.
I embraced the rivet decals enthusiastically but found my experiences a bit sobering as the carrier film is quite visible and you cannot really hide it without hiding the details too.
8 October 2023, 09:45
Łukasz Gliński
Thx for the heads-up Michael, I'll cut them as closely as I can 👍
Thx for the heads-up Michael, I'll cut them as closely as I can 👍
8 October 2023, 09:47
Łukasz Gliński
Started work on the tail and wings, so there was a first chance of some dry-fitting fun tonight 🙂
Actually it's a tad bigger than I thought
Started work on the tail and wings, so there was a first chance of some dry-fitting fun tonight 🙂
Actually it's a tad bigger than I thought
29 October 2023, 20:06
Łukasz Gliński
Currently looking for the right shade of pink - famous pink primer on top (benchmark) and my latest mix on the bottom. Not sure if it's still not too dark.
Currently looking for the right shade of pink - famous pink primer on top (benchmark) and my latest mix on the bottom. Not sure if it's still not too dark.
12 April, 20:07
Cuajete
Łukasz, I couldn't help but remember the Pink Panther biscuit to see that color tone on the fuselage:
[img1]
Looks so sweet 😋
Łukasz, I couldn't help but remember the Pink Panther biscuit to see that color tone on the fuselage:
[img1]
Looks so sweet 😋
15 April, 18:30
Łukasz Gliński
It does indeed. Actually I'm looking for the shade between the latest mix and your cake 😛
It does indeed. Actually I'm looking for the shade between the latest mix and your cake 😛
15 April, 19:22
Łukasz Gliński
After couple of trials (and errors 😄) I decided to go for MrColor C63 Pink, including some shading of course.
In the meantime I had to strengthen the wings mounting using old airbrush needle.
I hope to finish spraying soon. Yes, I know "soon" is long in this project 🙂
After couple of trials (and errors 😄) I decided to go for MrColor C63 Pink, including some shading of course.
In the meantime I had to strengthen the wings mounting using old airbrush needle.
I hope to finish spraying soon. Yes, I know "soon" is long in this project 🙂
14 June, 18:13
Łukasz Gliński
Welcome, the project takes so long there's no way to join too late 😄
I ended up with many bubbles, that became visible only after spraying - might try to fix it a bit, but don't want to ruin the last layer of pink.
I think I finished the pink part - the rivets are only visible in the closeup pics and that was my aim (+slight shading). 👍
Grey part next.
Welcome, the project takes so long there's no way to join too late 😄
I ended up with many bubbles, that became visible only after spraying - might try to fix it a bit, but don't want to ruin the last layer of pink.
I think I finished the pink part - the rivets are only visible in the closeup pics and that was my aim (+slight shading). 👍
Grey part next.
1 20 December, 21:27