SOC-3 Project
- 1
September 14, 2022
110711 SOC-3 (Hasegawa 1/72) in silver dope.
- 2
September 14, 2022
110711 SOC-3 (Hasegawa 1/72). Canopy masked with Bare Metal Foil.
- 3
September 14, 2022
110711 SOC-3 (Hasegawa 1/72) in silver dope.
- 4
September 14, 2022
110711 SOC-3 (Hasegawa 1/72). Canopy masked with Bare Metal Foil.
- 5
September 14, 2022
110711 SOC-3 Unmasking the canopy.
- 6
September 14, 2022
110711 SOC-3 Unmasking the canopy.
- 7
September 14, 2022
110711 SOC-3 Unmasking the canopy. Silver paint is cheap rattlecan silver.
- 8
September 14, 2022
110711 SOC-3 Unmasking the canopy.
- 9
September 14, 2022
110711 SOC-3. All rattlecan primary colors.
- 10
September 14, 2022
111207 SOC-3 adding wing walk non-skid. note attachment points drilled for rigging cables.
- 11
September 14, 2022
111207 SOC-3 adding wing walk non-skid. note attachment points drilled for rigging cables.
- 12
September 14, 2022
111207 SOC-3 adding wing walk non-skid. note attachment points drilled for rigging cables.
- 13
September 14, 2022
111207 SOC-3 Rigging wires and struts superglued to top wing.
- 14
September 14, 2022
111207 SOC-3 Rigging wires and struts superglued to top wing. Best I can tell, SOCs had four sets of double wires on each side.
- 15
September 14, 2022
111207 SOC-3 Rigging wires and struts superglued to top wing. Best I can tell, SOCs had four sets of double wires on each side.
- 16
September 14, 2022
111207 SOC-3 Rigging wires and struts superglued to top wing. Ready to install top wing assembly and pull rigging through lower wing.
- 17
September 14, 2022
111207 SOC-3 - Ready to install top wing assembly and pull rigging through lower wing.
- 18
September 14, 2022
111207 SOC-3 Top wing installed and rigging secured through lower wing.
- 19
September 14, 2022
111207 SOC-3 Top wing installed and rigging secured through lower wing. Rigging was tensioned with one finger on the bottom while securing with CA.
- 20
September 14, 2022
111207 SOC-3 Top wing installed and rigging secured through lower wing.
- 21
September 14, 2022
111207 SOC-3 Top wing installed and rigging secured through lower wing.
- 22
September 14, 2022
111207 SOC-3 Top wing installed and rigging secured through lower wing.
- 23
September 14, 2022
111207 SOC-3 Top wing installed and rigging secured through lower wing.
- 24
September 14, 2022
111207 SOC-3 Top wing installed and rigging secured through lower wing.
- 25
September 14, 2022
111207 SOC-3 Top wing installed. Hard to see rigging.
- 26
September 14, 2022
131003 SOC-3 re-visited. Ready for markings.
- 27
September 14, 2022
131003 SOC-3 re-visited. Ready for markings.
- 28
September 14, 2022
131003 SOC-3 re-visited. Ready for markings.
- 29
September 14, 2022
131008 SOC-3 in VO-4 markings.
- 30
September 14, 2022
131008 SOC-3 in VO-4 markings. Top wing roundels and stripes from spares box (not quite finished trimming!)
- 31
September 14, 2022
131008 SOC-3 in VO-4 markings.
- 32
September 14, 2022
131008 SOC-3 in VO-4 markings.
- 33
September 14, 2022
131008 SOC-3 in VO-4 markings.
- 34
September 14, 2022
131008 SOC-3 in VO-4 markings.
- 35
September 14, 2022
131008 SOC-3 in VO-4 markings.
- 36
September 14, 2022
131008 SOC-3 in VO-4 markings.
- 37
September 14, 2022
131021 SOC-3 in flight.
Komentáre
25 December 2024, 18:16 -
Album info
SOC-3, on landing gear, assigned to VO-4 aboard USS West Virginia (BB-48) ca. 1937.
From 1/72 Minicraft/Hasegawa kit Nr. 057, c1969 (1977 release)
This is a weekend project that took 2+ years!
37 snímky
1:72
dokončený
Všetky albumy
Zobraziť všetky albumy »