PLAN Type 056 Jiangdao Class Corvette

1
April 26, 2021
2
April 26, 2021
bow section had a huge gap which had to be eliminated with putty.
3
April 26, 2021
modelling the seascape
4
April 26, 2021
5
April 26, 2021
6
April 26, 2021
7
April 26, 2021
30 mm close defence gun
8
April 26, 2021
9
April 26, 2021
exhaust compartment completely out of PE-parts exept the muffler pipes
10
April 26, 2021
11
April 26, 2021
12
May 2, 2021
decoy launcher and lifebuoys with their etched racks
13
May 2, 2021
2 x 2 yingji-83 (translated “Eagle Strike”) ship to ship subsonic seaskimming cruise missile launchers; the rockets have a reported maximum range of up to 150 km
14
May 2, 2021
HHQ-10 close in AA-missile system for up to 9 km range. I also finished the complete rear superstructures together with the railings as there will be enough space to brushpaint the deck surfaces later by hand.
15
May 2, 2021
16
May 2, 2021
17
May 2, 2021
18
May 2, 2021
19
May 2, 2021
20
May 2, 2021
21
May 9, 2021
I was able to fix my error with the rotorblade holders. Not perfect but good for me
22
May 9, 2021
I primed the whole ship with ALCLAD enamel grey primer and after one day drying time painted the ship´s side walls with Vallejo 70.907 Pale Grey blue and the horizontal decks with Vallejo 70.867 Dark blue grey which both fit perfectly for PLAN ship colors
23
May 9, 2021
first test dryfit with the unfinished sea diorama. There is a huge gap between the frontal bridge windows and the lower hull but this will be fixed later with liquid putty and a slab of paint.
24
May 9, 2021
The first impression of the ship at its base
25
May 9, 2021
26
May 10, 2021
finished to paint the tiny ship´s helicopter with the same color as the ship - Vallejo 70.907 pale grey blue
27
May 10, 2021
28
May 10, 2021
looks good at the ships helicopter deck 🙂
29
May 14, 2021
5Star have an etched template for painting the helicopter deck markings
30
May 14, 2021
Some small retouches have to be made but all in all I am satisfied with the result
31
May 14, 2021
Funnel compartment top painted in black and fixed at the ship´s superstructure
32
May 14, 2021
The decal for the gun turret marking applied and sealed and gun turret itself glued on
33
May 14, 2021
Bridge windows made with KRISTAL KLEAR and the big open joint betwenn the upper and lower part of the bridge component sealed with color. I am satisfied with it 🙂
34
May 16, 2021
Ship and its seabase finally finished
35
May 16, 2021
36
May 16, 2021
the foam effect was made with cotton soaked in HUMBROL acrylic gloss clear
37
May 16, 2021
the bowwaves were made with thin KRISTAL CLEAR diluted with Vallejo 70.898 dark sea blue. It was thinly brushed onto baking paper and removed and bended as a wave after it dried overnight
38
May 16, 2021
39
May 16, 2021
40
May 16, 2021
41
May 16, 2021
42
May 16, 2021
The nice small etched plate was within 5Stars super upgrade set. I spraypainted it with Tamiya black and sanded it down to remove the black color exept for the letters
43
May 16, 2021
At last there was just to seal everything inside a neat diorama box. This box was, as always, bought from SORA

Komentáre

12 17 April 2021, 12:44

Tom B.
Nice work with all of that photoetch 👍 Will keep and eye on this, as I have a 1/700 PLAN frigate sitting in my stash 😉

3 May 2021, 17:58

Thomas Wirsching
Hey Tom, thank you for your interest and the comment. Some updates will come during the week / weekend

4 May 2021, 10:42

Ingmar Stöhr
Indeed! Very nice build with all this finely detailed PE and resin parts. ?
One silly question though: Areen't the rotor blades misaligned by 45 degrees to the rotor head in picture 19???

4 May 2021, 13:26

Thomas Wirsching
Ingmar I think you are right... already thrown away the instruction booklet - I am sure they told me to do the way it is shown but I think you are totally right. The instructions from 5Stars are very tricky (parts ommissions, part numbers not clearly assigned in the fret and now also wrong arrangement of parts 🙁. I am not sure if I still can fix that error with the superglued rotor parts

4 May 2021, 17:16

Ingmar Stöhr
Weils so einfacher geht: Sekundenkleber ist normalerweise recht spröde. Ich denke, dass man die PEs noch auseinander bekommt, wenn du vorsichtig eine Skalpellklinge dazwischen schieben kannst.
Alternativ, wenn du noch den ganzen Rotor vom Hubschrauber abbekommst hilft auch ein Feuerzeug. Das lässt den Sekundenkleber verbrennen und du hast die Teile wieder einzeln. Aber bei den kleinen Teilen aufpassen! Die können mit einem Feuerzeug auch schmelzen! Alles schon ausprobiert 😉
Oder du lebst einfach mit diesem kleinen Schönheitsfehler. Am fertigen Mdell wird es kaum jemandem auffallen.

4 May 2021, 18:55

Thomas Wirsching
Hallo Ingmar: Ich habs mit der Skalpellkinge versucht aber ich habe zu sorgfältig verklebt. Ich habe die überstehenden Aufnahmen für die Rotorblätter mit einem Xuron Ätzteileschneider sauber abgeschnitten und neu verklebt. Sieht nicht perfekt aus aber für mich ok. Danke nochmals für Deinen Hinweis ?

9 May 2021, 13:30

Ingmar Stöhr
Sieht doch super aus!

10 May 2021, 04:42

Thomas Wirsching
Danke 🙂

10 May 2021, 08:08

Thomas Wirsching
Gentlemen, I call this one finished ?. The commissioned ship will leave the harbour now on its mission to patrol the south chinese sea. Thanks for watching ?

16 May 2021, 08:12

Ingmar Stöhr
Nice! Very well done!

17 May 2021, 07:19

Neuling
Top result! 👍

17 May 2021, 08:55

Thomas Wirsching
Thank you all very much ?

17 May 2021, 14:42

Sven Schönyan
Nice result and excellent seascape!

17 May 2021, 14:56

Spanjaard
it looks great.

17 May 2021, 14:56

Thomas Wirsching
Sven and Spanjaard, thank you too. I´m glad you like it ?

18 May 2021, 16:35

Album info

This is a new growing class of Corvettes which were build from 2013 on and are in active service within PLAN´s north, east and south sea fleets. All ships of this class are named after bigger chinese cities. I will depict ship number 55 "Baize", a city from Guangxi province. This specific ship is serving within the south sea fleet and is patrolling the Diaoyu (aka Senkaku aka Spratley) islands.

PLAN 056 class corvette

43 snímky

1:350

Prebieha

1:350 Type 056 Corvette - Super Upgrade set (Five Star Model FS352001)

PLA Navy Type 056 Corvette Super Upgrade set

中国人民解放军海军 (People's Liberation Army Navy 1949-now)

Všetky albumy

Zobraziť všetky albumy »