I-22 Iryda
Komentáre
1 1 April 2014, 19:39
GlennThe trick with vac forms is to CUT and SAND carefully!!! Keep checking the fit of parts before going too far. Don't forget to reinforce joins with plastic strips (from the leftover plastic) and make bulkheads to stop the plastic collapsing when handled. Add wing spars made from soild plastic or wood or metal can help stop wings drooping. The undercarrige is often the biggest problem sometimes too weak. If they haven't given you metal or plastic or resin parts for that i often find replacement parts for the wheels too! Sometimes it's the only choice you have for some subjects. Good Luck
1 April 2014, 23:11
Łukasz GlińskiActually when I assembled the main parts I didn't know much of those advices, so I don't expect much from the fuselage and wings😉
But I decided to sand down to the proper shape the wings'/control surfaces' ends by adding new HIPS parts.
I sand them every now and then, but now it's time to concentrate on the cockpit.
I hope I'll be patient enough to supply this thread with new pics 🙂
2 April 2014, 08:00
Łukasz GlińskiI spent couple of hours today trying to form replacement canopy and I didn't manage to accomplish the mission. Still thinking whether I should try again (not really keen to) or to use the one from the kit - which is quite fawlty (clearly visible on the last photo). What do you think?
30 December 2016, 20:15
gorbyVacform! Your a braver man that I Lukasz. I can see what you mean about the canopy, but if you use it, when the model is complete, the only person that will notice, will probably be you. It's no biggie - I could live with it, but can you?
31 December 2016, 18:34
Bart Goesaertimpressive project, and a nice aircraft... do you want to do the weapon load-out from the picture? Armory has some really nice ones
14 April 2017, 07:16
Łukasz Gliński@Adam: I found a build report in the last edition of "Lotnictwo z Szachownicą" and the author mentioned they fit, so I decided to follow that hint as the rest of the kit is enough time consuming😉
@Bart: Yes, I plan to attach some UB rocket pods and the small bombs visible on the project cover pic. I'm gonna use either the ones from Armory or from the KP's Frogfoot kit. But it's far away from now😉
14 April 2017, 10:13
Łukasz GlińskiAfter around 5 failed attempts to form a replacement canopy I came back to consider mounting the OOB one. I know it's visible, but there are many other simplifications in my build, like undercarriage for example. In the meantime I masked the cockpit tub and I'm sanding & scribing again 🙂
10 May 2017, 19:59
Bart GoesaertCan you tell me more about what went wrong, and how you work for the canopy?
11 May 2017, 06:54
Łukasz GlińskiWell, I made the plug out of wood, putty and some CA glue. I tried to press it thorugh some transparent packagings over a cooker 🙂
Tried couple f times and always ruptured the stuff. Maybe I should use some oil?
On the other hand I know that the professional way is to build a tool like that: ipmsstockholm.org/ma..oulding_canopies.htm, but I'm not sure whether such investment makes sense for just a single canopy.
I even started to consider mounting the open canopy, but not sure whether the interior is good enough...
12 May 2017, 18:45
Bart GoesaertAs for now, I've made my plugs approx. the same, but i make the lower borders further then they should be, so that I keep a straight line after cutting. Then I take a straight sheet of clear packaging, heat it above the furnace till it's starts to hang. Then I pull it over the plug manually.
[img1]
[img1]
[img1]
16 May 2017, 08:36
Bart GoesaertI also think that for RC -aircraft, there is some plastic that you can melt over the plug in an oven.
16 May 2017, 08:56
Łukasz GlińskiThanks Bart for inspiration, I tried once again, this time inside the oven using gloves and not trying to push the plug through the flat plexi, but a bent one and it helped. Probably this was the missing piece of technique 🙂
It's bi flat over the front seat, but barely visible for me. It made my day😉
16 May 2017, 17:30
Łukasz GlińskiWelcome Martien. Currently I started scribing, but there will be almost a 3 weeks break as I'm going for holidays. I'm gonna continue scribing in the 2nd half of June.
23 May 2017, 07:00
Christian BruerInteresting and challenging project. Very nice and sharp work so far 👍
Thank you Łukasz and Bart for sharing the hints about vacu forming. I never tried this before, but it is a good method replacing scale 144 canopies because most of them are much to thick.
23 May 2017, 18:34
Łukasz GlińskiWelcome Christian. I guess 144 canopies will be much easier to bend around the plug, which in turn will be twice smaller 🙂 Good luck and keep us posted how it went 🙂
23 May 2017, 19:31
Łukasz GlińskiMasked the canopy finally, I know it's not perfect, but I'm happy with it. Now it's the time to blend it into the fuselage, so few days of sanding ahead of me 🙂
9 July 2017, 19:14
Łukasz GlińskiManaged to blend the canopy into the fuselage (moreless), currently trying to scribe some convincing panel lines. As it's a vacuformed kit, I spent last two weekends scribing, filling with CA and sanding (in repeated turns of course). No idea when she's gonna be ready for painting 🙁
24 September 2017, 19:33
Alexander GrivonevYeah, vacu kits are for true men (or masochists 😄 ) but for some aircraft types you have no choice...had the pleasure once myself with a Yak-11 from Waku. Turned out surprisingly well. Never heared of your aircraft type before. Looks great so far!
24 September 2017, 20:29
Łukasz GlińskiThanx Alex. Luckily there are other Yak-11s available - one can be seen among my completed works 🙂 Well, I-22 was an interesting story, but w/o a happy-end unfortunately...
25 September 2017, 06:54
Łukasz GlińskiJust for those who want to know what I'm doing - I keep on scribing and sanding (in turns)😉
17 October 2017, 20:48
Łukasz GlińskiOh thanks 😭 This is the least enjoyable part for me unfortunately. I can hardly wait to start painting...
18 October 2017, 06:03
Łukasz GlińskiDecided to try scratchbuilding the landing gear, keep your fingers crossed! 🙂
31 May 2018, 20:24
Łukasz GlińskiThx, doing my best, but I broke off the nose accidentially today 🙂 Managed to fix it already, now it's time for the pylons and hopefully I can start painting then...
23 June 2018, 20:49
Martin von Schreckensteinhaha, vacuform is where I draw the line between building models and straight up pain🙂 You are fighting a solid fight there. I admire your patience. Looking forward to the finish line. Keep it up!
25 June 2018, 13:41
Łukasz GlińskiThanks for your comments mates. Well, I got bit annoyed, but was able to fix it. Fingers crossed I didn't destroy the inside of the cockpit (as I can't see too much of it currently. I just found out I forgot to add the huge Iskra-like pitots on both wings. Hopefully this is the last thing I forgot before painting 🙂
25 June 2018, 14:02
GlennWow this has been a real pain in the a$$ kit! But i admire your will to keep on going. It's looking pretty good hopefully the worst is over now! 🙂
25 June 2018, 16:51
Łukasz GlińskiThx Glenn. It's been a while and I started painting - sand is on, the green is drying. Those two first, cause they are the enamel ones, grey and blue will follow soon I hope.
Btw. can anybody recommend a company that could print decals or cut masks for the registration (SP-PWE) for that project? (let say in Yurop, so I won't get killed by the postage cost😉 )
1 August 2018, 11:00
Łukasz GlińskiPainted it, though the yellow one (mix of two Humbrol enamels) likes the Gunze maskol too much and either comes off upon demasking or becomes greenish. I have to respray it once again.
Next step? I have to order masks for the registration letters somewhere...
19 August 2018, 18:20
Alexander GrivonevRespect for the patience and dedication on this little piece of nightmare😄 painjob is very nice!!
19 August 2018, 19:36
Łukasz GlińskiThanks Alex, it's a nightmare indeed, that's why I don't hurry and don't expect this to be flawless😉
19 August 2018, 20:39
Bart GoesaertIt sure is looking good... I admire your patience with this kit... Ok it's a virtue for most modellers, but to me you are stretching the boundaries...
20 August 2018, 05:15
Łukasz GlińskiWell, that's why the progress is so slow. I'm quite afraid what I'll find after removal of the windscreen masks..
20 August 2018, 06:42
CuajeteI have a Matchbox's Hunter, with the masks on the windshield for more than two years. I think it's better to wait for them to disintegrate on their own 😄 😄 😄
20 August 2018, 17:22
Łukasz GlińskiFinally varnished the kit and removed the masks - it looks better than I expected, but the results of the broken nose could be seen in the cockpit (e.g. one of the lead pellets). I removed it today (had to open the windshield), will try to clean the windshield from the inside in the meantime.
23 September 2018, 20:20
Łukasz GlińskiThanks mates. Well, it's hard to polish (capital letter neeeded here? 😛 ) the canopy from the inside, so Gauzy Agent has to be good enough. But I promise to use GX varnish and polish it on the outside 🙂
25 September 2018, 06:01
Łukasz GlińskiAlright, canopy closed back and sealed using the Micro Cristal Clear, enjoy the pics 🙂 Now time to source the 'SP-PWE' masks and start building pylons...
1 October 2018, 19:52
Łukasz GlińskiPicked up the masks yesterday. Today was the spray day and I think the results are good enough, even surprisingly good 🙂 Sprayed using GX white and Gunze C2. Imagine that GX is so strong that it started to fold like a decal sometimes 😠
There are some minor corrections needed here and there in order to move to the pylons scratchbuilding 🙂
27 October 2018, 20:05
Łukasz GlińskiYes, I ordered them at a local printshop. The 'S' letter is too thin, but I can live with it.
28 October 2018, 07:37
Łukasz GlińskiThx, it went surprisingly well I have to admit 🙂 I was afraid the paint underneath the masks will be peeled off (couldn't find better wording) as these are not lacquer paints, but it happened only on the top of the right wing.
6 November 2018, 11:36
Łukasz GlińskiPylons - done. I also selected the armament:
- 2*UB-16 (front coming from Italeri's Frogfoot, back from an old Mastercraft's weapons set)
- 8 bombs on 4-rack pylons (stolen from Bilek's Fitter).
In the meantime I'm working on the undercarriage and decalled the most of stuff, but still have to steal some stencils from other kits). 🙂
27 December 2018, 15:03
Łukasz GlińskiFinished, my dear audience 🙂 Enjoy the pics. I'm aware of the fact that it's neither a stunner nor my best build, but the longest one for sure 😄 (I don't even remember when I started it)
Waiting for an injected Iryda (IBG? Arma? Are you reading this?)😉
I think I need a break from vacuform kits for some time now...😉
@Cuajete: Muchos gracias 🙂
1 January 2019, 13:17
Nathan DempseyWell done! Those vac kits can be difficult. Your kit came out great and the camo pattern is eye catching.
1 January 2019, 13:42
Łukasz GlińskiThank you guys. Vacuform, indeed, started long time ago in the 20th century😉
@Jozef: Thanks, that was the one&only camouflaged I-22 ever.
1 January 2019, 14:45
Gordon SørensenFantastic, Lucasz! Congrats on finishing a great looking model!
1 January 2019, 16:27
Łukasz GlińskiThank you for your enthusiastic comments, much appreciated 🙂
It was a long and hard work indeed.
1 January 2019, 18:03
Bart GoesaertSplendid result and beautiful camo. Glad to following this build.
1 January 2019, 22:00
Łukasz GlińskiThank you folks. Bart, your support was very helpful while I was struggling with the canopy forming, thanks once again! 🙂
2 January 2019, 11:09
Alexander GrivonevThat is indeed a terriffic result. Considering it is a vacu kit even more!
"started long time ago in the 20th century" Haha, wow 😄
2 January 2019, 18:08
Erik De SmetVery nice result, Lukasz, certainly for a vacform; but do you know Murphy's modelers law ? Once you have built a vac form, the resin version will become available 🙂
2 January 2019, 19:18
Łukasz GlińskiThx Erik, usually it happens when I start building something. But I hope your forecast will come true 🙂
2 January 2019, 19:29
Bart GoesaertWell, you know what they say... when you spent a large amount on the resin model, a plastic model will appear on the horizon...
3 January 2019, 12:27
Bernhard PetheNot everyone builds, such a model. I like it. 👍 Is there still no injection molding model?
3 January 2019, 16:34
Łukasz GlińskiThank you. Nope, nobody makes neither injection nor a resin one unfortunately. It's a niche - couple of such planes built, used only 11 years, then written off.
3 January 2019, 17:04
Bart GoesaertThere are models of aircraft with fewer made and shorter lifespans then this one. So not all hope is lost...
3 January 2019, 17:21
Łukasz GlińskiThanks Saeed, but I have to admit I would do it different way today😉 (is it called learning?)
4 January 2019, 08:58
Album info
Vacuform by Marfix, the sole available I-22 in 1/72. Second ever vacu attempt, first - P-39 flew into the trashbin v.quickly, it was like 15 yrs ago. This time I'm gonna be more patient. The idea is to finish it in the SP-PWE markings.
