WIP: Eurocopter BK-117 "Space Design" D-HBKS
Komentáre
38 24 June, 19:12
Nicolas
As soon as I finish one of my 3 current projects (2 of them ar nearly done) I will start with this little helicopter.
As soon as I finish one of my 3 current projects (2 of them ar nearly done) I will start with this little helicopter.
24 June, 19:17
Nicolas
As I am covid positive (fortunately only with very mild syntomas) I had some time to build again today. So far I am positively surprised by the accuracy of fit. There are no locator pins, but I can now click the fuselage and cockpit together and even the tail section holds without glue.
As I am covid positive (fortunately only with very mild syntomas) I had some time to build again today. So far I am positively surprised by the accuracy of fit. There are no locator pins, but I can now click the fuselage and cockpit together and even the tail section holds without glue.
8 July, 19:15
Nicolas
I would like to do some rivets on the exteriour, but I couldn't find some good drawings. If somebody has a hint I would be grateful.
I would like to do some rivets on the exteriour, but I couldn't find some good drawings. If somebody has a hint I would be grateful.
8 July, 19:56
Nicolas
Today I started installing the controls. Doing so I noticed, the collectiv controls are missinh in the kit. So I started scratchbuilding them after photos. Also fabricated and installed blinds for the paxes.
Today I started installing the controls. Doing so I noticed, the collectiv controls are missinh in the kit. So I started scratchbuilding them after photos. Also fabricated and installed blinds for the paxes.
9 July, 19:06
Freak
Interesting project! Love the WIP pics and demo of various detailing techniques.
Interesting project! Love the WIP pics and demo of various detailing techniques.
12 July, 20:14
Shar Dipree
I have the same kit too. I'm really looking forward to your results. Following. 🙂
I have the same kit too. I'm really looking forward to your results. Following. 🙂
13 July, 05:27
Nicolas
Welcome Łukasz, there is no reason to be afraid. The fit seams quite good, and the missing details is somthin one can improve. 😉
Welcome Łukasz, there is no reason to be afraid. The fit seams quite good, and the missing details is somthin one can improve. 😉
15 July, 16:33
bughunter
The Colani design is cool 👍 Have fun!
And I hope your covid is gone without bad effects!
The Colani design is cool 👍 Have fun!
And I hope your covid is gone without bad effects!
19 July, 18:39
Nicolas
Hi Bughunter, thanks.
Covid wasn't to bad, I got 3 day with mild syntomas and 5 days waiting for a negativ test. 😉
Hi Bughunter, thanks.
Covid wasn't to bad, I got 3 day with mild syntomas and 5 days waiting for a negativ test. 😉
19 July, 19:38
Mr D
Done some nice improvements Nicolas... Be worth it, it's good to do this as puts a nice personal touch on it, l need to pick up some card like you have used ( what is it l need to look for ?)
The 2 Revell models l built ...l found the decals took a bit more softening than others models l have done!? the decals said made in Italy....no company name.
Looking good 👍 be nice bright unusual one this 😁
Done some nice improvements Nicolas... Be worth it, it's good to do this as puts a nice personal touch on it, l need to pick up some card like you have used ( what is it l need to look for ?)
The 2 Revell models l built ...l found the decals took a bit more softening than others models l have done!? the decals said made in Italy....no company name.
Looking good 👍 be nice bright unusual one this 😁
8 August, 19:53
Nicolas
Hallo Mr D and thanks.
You can look for plastic sheets and profiles (tubes, chanels, I-beams, etc,) from various manufacturers like AK or Evergreen or use packing material eg. most blisterpacks. 😉
Hallo Mr D and thanks.
You can look for plastic sheets and profiles (tubes, chanels, I-beams, etc,) from various manufacturers like AK or Evergreen or use packing material eg. most blisterpacks. 😉
9 August, 05:02
Mr D
Hi Nicolas, doing a good job on the extra detail bits.
Be worth it, you only get to build it once...so worth getting it how you want it.
Nice 👍👍👍
Hi Nicolas, doing a good job on the extra detail bits.
Be worth it, you only get to build it once...so worth getting it how you want it.
Nice 👍👍👍
24 August, 10:45
Kesa Tiho
Very nice build. Ive always been curious though, how do you get such a precise paint job. Especially with the interior.
Very nice build. Ive always been curious though, how do you get such a precise paint job. Especially with the interior.
16 September, 19:01
Nicolas
Hi Kesa, I do most of the interior freehand with a small brush (mostly size 000, but details sometimes with size 10/0) and well diluted paint. You kan put your brushhand onto the hand holding the part to reduce shaking.
Hi Kesa, I do most of the interior freehand with a small brush (mostly size 000, but details sometimes with size 10/0) and well diluted paint. You kan put your brushhand onto the hand holding the part to reduce shaking.
16 September, 19:11
Mr D
Looking good Nicolas 👍
Taking good shape now.
What do you use for a primer??
😃👍
Looking good Nicolas 👍
Taking good shape now.
What do you use for a primer??
😃👍
3 October, 18:56
Nicolas
After sanding, priming and repainting the helicopter several times today, there's not much new here, but I used the drying time as much as possible to start on the first figures for the diorama.
After sanding, priming and repainting the helicopter several times today, there's not much new here, but I used the drying time as much as possible to start on the first figures for the diorama.
5 October, 19:06
Nicolas
The helicopter was sanded, primed, filled and primed again today. In the meantime, I'm almost satisfied with the result. Visible progress has only been made on the figures.
The helicopter was sanded, primed, filled and primed again today. In the meantime, I'm almost satisfied with the result. Visible progress has only been made on the figures.
6 October, 19:19
Nicolas
Welcome Finn, thanks Mr D.
After 2 weekends without crafting (1x at an exhibition, 1x food poisoning) the work continues here. I have started painting the figures. I was also able to start on the diorama base plate. This represents the windowless top floor of a high-rise building in which the technology such as elevators, fire water supply or air conditioning is located. A subsequently mounted helipad is then installed on the roof.
Welcome Finn, thanks Mr D.
After 2 weekends without crafting (1x at an exhibition, 1x food poisoning) the work continues here. I have started painting the figures. I was also able to start on the diorama base plate. This represents the windowless top floor of a high-rise building in which the technology such as elevators, fire water supply or air conditioning is located. A subsequently mounted helipad is then installed on the roof.
27 October, 20:15
Patrick Hagelstein
Hi Nicolas! Sorry to hear that you were ill... Hopefully things are getting better now! I'm also sorry you had to scrub those Preiser figures as Preiser offers these exact figures in 1/72 in bare white plastic as well. I had my local hobby shop (in Aachen) order them for me from the Preiser catalogue. Maybe something for a next project?
Hi Nicolas! Sorry to hear that you were ill... Hopefully things are getting better now! I'm also sorry you had to scrub those Preiser figures as Preiser offers these exact figures in 1/72 in bare white plastic as well. I had my local hobby shop (in Aachen) order them for me from the Preiser catalogue. Maybe something for a next project?
27 October, 20:26
Mr D
Hi Nicolas 👋 glad your getting back to a bit of modeling... Diorama sounds interesting 👍
Hi Nicolas 👋 glad your getting back to a bit of modeling... Diorama sounds interesting 👍
27 October, 21:39
Nicolas
Welcome Michael & Patrick
@ Patrick: I know, I have already used the unpainted figures in another project. But unfortunately I couldn't get them from the local dealer or on ebay or similar.
Welcome Michael & Patrick
@ Patrick: I know, I have already used the unpainted figures in another project. But unfortunately I couldn't get them from the local dealer or on ebay or similar.
28 October, 05:32
Nicolas
Thanks Mr. D, hopefully I can get back to work soon. Unfortunately I injured my elbow 3 weeks ago and since then I can't even hold light objects like paintbrushes.
Thanks Mr. D, hopefully I can get back to work soon. Unfortunately I injured my elbow 3 weeks ago and since then I can't even hold light objects like paintbrushes.
30 November, 07:50
Nicolas
Dankeschön. Mit etwas Glück kann ich zu den Feiertagen wieder ein wenig was machen.
Dankeschön. Mit etwas Glück kann ich zu den Feiertagen wieder ein wenig was machen.
7 December, 09:18
Mr D
How you doing Nicolas 👋.
I see another Revell Space Design is coming up in the news feed's
👍
How you doing Nicolas 👋.
I see another Revell Space Design is coming up in the news feed's
👍
1 14 December, 19:04
Nicolas
Hi Mr. D, thanks for asking. The swelling in my elbow has gone down considerably and I can move my fingers again, although I still lack any sensitivity. I wanted to try in the next few days whether I can clamp the figures in the 3rd hand (holder for soldering) and at least continue painting a bit. Unfortunately, cutting, sanding, gluing or filing is still out of the question.
Hi Mr. D, thanks for asking. The swelling in my elbow has gone down considerably and I can move my fingers again, although I still lack any sensitivity. I wanted to try in the next few days whether I can clamp the figures in the 3rd hand (holder for soldering) and at least continue painting a bit. Unfortunately, cutting, sanding, gluing or filing is still out of the question.
14 December, 20:39
Nicolas
Thanks Patrick.
Today I tried a bit of painting. It didn't work too well, as I couldn't open the paint jars. But I think it can only be a matter of days now.
Thanks Patrick.
Today I tried a bit of painting. It didn't work too well, as I couldn't open the paint jars. But I think it can only be a matter of days now.
1 15 December, 15:35
Album info
Build proces for my 1/72 Eurocopter BK-117 in Stunning Space Design colours designed by Luigi Colani. The Kit is based on a 1988 Matchbok kit and there is no detail set or a kit from better moulds that I know of. So I'll try to improve this oldie a little bit.
I'm going to present the helicopter on a helipad in a city with 2 pilots waiting for some VIPs.