paper modeling database | управление закромами

IronMan129

Tony Stark (IronMan129)

1/72 Hasegawa Lockheed P-3 Orion

1
May 24, 2020
Picture 1 of what my mate sent to me.
2
May 24, 2020
Picture 2 of what my mate sent to me.
3
May 24, 2020
Picture 3 of what my mate sent to me.
4
February 8, 2024
Now I've got my hand on her the first think I'm going to do is sort out the area we're my mate tried to put an AWAC Dish on.
God idea but not what I want in my Orion.
5
February 8, 2024
The blank plate to the rear of the underside fuselage has been removed.
6
February 8, 2024
Next I'm going to add what I call the "depth charge dispenser plate" at the rear of the underside fuselage.
7
November 22, 2024
After a few months of no shows I decided whilst on a mojo hype to get all the bits together for an overall photo.
8
November 22, 2024
I had to make a MAD Boom for the P-3C as hers was removed by my best mate.
9
November 22, 2024
I had to add 1 prop blade from the original kot as the spares I had sourced were missing just 1 blade!
10
November 22, 2024
Initial landing gear on, there's 1 piece not installed yet on the back of the main gear legs as I didn't want to ruin it by accidently moving anything.
11
November 22, 2024
I've also attached the MAD Boom and added alot of filler as can be seen in the photo, ut just needs alot of sanding!

Комментарии

13 24 May 2020, 02:08

Nicolas
Following with interest.

8 February, 20:19

Album info

An album showing the progress of the restoration of the 1/72 Hasegawa K15 Lockheed P-3C Orion in IS Navy markings using a set of Quickboost Props.

1/72~ Hasegawa Lockheed P-3C Orion 15-8219

11 изображения

1:72

В работе

1:72 P-3C Orion (Hasegawa K15)

Lockheed P-3C Orion

US Navy (1794-now)
VP-50 Blue Dragons 158219
Misawa

Gloss White, Lt.Gull grey

Все альбомы

Посмотреть все альбомы »