Arado Ar 196in Swedish civil service/ Topdrawing 14
Комментарии
41 3 January 2014, 08:28
Roland SachsenhoferI started with Revells Arado for another round: this time I aim to get a representation of a civil floatplane, used in Sweden in the mid 40´s. Decals are from "Topdrawing 14", I trustfully hope they will work as good as they are looking...
You can see three building steps, next will see the decals fixed and the cowling painted blue. I am quite pleased with that subject -and looking forward to finsh that nice looking floatplane in the very near future 🙂
3 January 2014, 08:37
Christian BruerHi Roland, interesting colors. This seems to be a really unique Ar196!
3 January 2014, 10:38
Kevin FouremanLooking forward to seeing this one finished. Looks like a very interesting paint scheme.
3 January 2014, 12:51
Roland SachsenhoferI am pleased you are interested! As soon as I got to know about that version I had to have that Kagero decals...
Look at that site (in German language) to get a very informative "biography" of that special Arado. It´s an article from "Flugzeug Classics" illustrated with rare pictures of the late SE-AWY.
flugzeugclassic.de/z..=240&show=seite1
3 January 2014, 20:37
Roland SachsenhoferYesterday I got the decals applied, the parts of Kagero/ Cartograph proved to be of excellent quality and have been a pleasure to use.
Thank you mates!
4 January 2014, 06:46
Gordon SørensenI really like the variation in the silver, and thanks for showing how you did it! The engine looks great too!
4 January 2014, 16:47
Roland SachsenhoferThe Swedish Arado got finished wirhout any further troubles; I did a decent and, as I hope, adequate amount of "wear and tear" similar to the condition shown in the few pictures of the real thing.
That was a rather dense build; enabled by the excellent and innovative Revell moldings and the trouble-free Cartograph decals. Anyway, for me it will be the last Arado floatplane for a while... 🙂
7 January 2014, 06:18
Wim van der Luijta very good looking threesome. This latest one turned out very good, I really like the tonal variation in the silver of the airframe
7 January 2014, 08:30
ole mollerthey do all look fantastic,its one aircraft i would love to build one day
7 January 2014, 09:42
Christian BruerWell now you should be able to build them without using a construction manual😉 Great stuff mate, very nice!
7 January 2014, 19:53
Roland SachsenhoferMichel, Christian, I recommend to everyone that fine Revell kit- even if the inovative canopy construction is a little bit of an unresolved problem to me. Your comment makes me quite proud, thank you both!
8 January 2014, 15:28
Stefan FraundorferUnd wieder eine erstklassige Arbeit von Dir - gratuliere! Kannst Du mittlerweile eine Arado 196 blind zusammen bauen? So wie wir es damals beim Bundesheer gelernt haben, ein Sturmgewehr blind zu zerlegen und wieder zusammen zu setzen.
11 January 2014, 12:49
Jenseine edle , vollkommene , überwältigende Ansicht der Versionen und Exoten die man aus der Revell Arado machen kann , einfach nur Klasse 👍
11 January 2014, 13:39
Roland SachsenhoferHallo,
Stefan, vielen Dank! Naja, ich vermute einmal, dass der blinde Zusammenbau mit der Arado derzeit besser funktioniert wie mit dem StG 77... 🙂
Jens, beeindruckendes Worte die mich sehr motivieren- danke!
11 January 2014, 17:22
Fab FantinGreat job and very nice detailing work as beeing a land surveyor i would say the map on radio navigator station is 100% accurate !
11 January 2014, 20:05
Roland SachsenhoferThank you mates!
Fab, you are right 🙂 Have you seen the set square on the navigators table- and the divider? Revell has definitly a sense humour 🙂
12 January 2014, 08:10
Fab FantinYes Roland i saw it this is amazing and the level contour lines on the map also killing me ! Next time i will try to find this map series hoping these are not out of date 😄
14 January 2014, 19:31
Roland SachsenhoferHello! Thank you very much for your encouragement- I feel motivated! Danke vielmals, Xenia!
17 January 2014, 06:33
gorbyWOW! That was a stunning build Roland. It was posted the year before I joined ScM so I've not seen it before.
Hope you are doing well and your injury isn't causing you too much discomfort.
3 February, 08:56
Markus AntoniusOccasionally happens, when kits ar re-released @Ronad Sachsenhofer 🙂
3 February, 10:24
Roland SachsenhoferI appreciate your feedback - thank you! That was actually one of my first "three-part projects" where I got stuck on one topic, so to speak. Gorby, thanks for asking, luckily I'm well looked after. As I only move around with crutches and my wife cooks for me, I just have to make sure I don't put on any weight in the next six weeks 🙂
1 3 February, 13:34
Rui SA Beauty, indeed 👍
I've this kit and if you did it OOB I'm very pleased with that. Your albuns will be most interesting when I tackle mine 😉
3 February, 15:51
Roland SachsenhoferThank you Zbynek, I was also glad to have found such an attractive and rare mark at Kagero/Topdrawing. The decals, I remember, were wonderful to work with.
7 February, 10:10
Air noMerci pour ta visite Roland. Je viens de terminer mon Ar 196 au 1/72ème, alors forcément je suis sensible au tiens. Bravo il est magnifique !!
13 February, 15:53
Roland SachsenhoferJe te remercie de tout cœur ! Je comprends ta préférence pour le 1:72, mais si tu veux essayer l'échelle 1:32, je peux vraiment te recommander l'Arado 196 de Revells 🙂
Thank you very much! I understand your preference for 1:72, but if you want to try the 1:32 scale, I can really recommend Revell's Arado 196 🙂
1 14 February, 14:28
