Junkers Ju 86R-1 Höhenfernaufklärer 1942 "MINI GB Junkers 86"
Comentarii
58 27 April 2023, 22:42
Nathan Dempsey
Ooh, since building my Spitfire I've wanted to see this kit built. I'm in!
Ooh, since building my Spitfire I've wanted to see this kit built. I'm in!
28 April 2023, 01:42
Daniel Klink
Welcome Mates! Yeah it took the mk.vi to rech those😉
Test fit is bettervthan expected😉
Welcome Mates! Yeah it took the mk.vi to rech those😉
Test fit is bettervthan expected😉
28 April 2023, 11:54
Daniel Klink
Against the usual plan i started with the wings, because they seemed very fragile to me and they need a lot of care in case of sanding and gap filling. So i find it easier to handle starting the construction with them.
Against the usual plan i started with the wings, because they seemed very fragile to me and they need a lot of care in case of sanding and gap filling. So i find it easier to handle starting the construction with them.
29 April 2023, 16:30
Slackbladder
Crikey, I've headbutted the wing flap of a Cessna 172 float plane trying to get in and start it before it floated away but I wouldn't want to run into the wingtip of one of these!!
Crikey, I've headbutted the wing flap of a Cessna 172 float plane trying to get in and start it before it floated away but I wouldn't want to run into the wingtip of one of these!!
29 April 2023, 18:30
Daniel Klink
@Cuajete yap those wings are really wide 🙂
@Slackbladder LOL and yes good point 🙂
@Cuajete yap those wings are really wide 🙂
@Slackbladder LOL and yes good point 🙂
29 April 2023, 20:29
Daniel Klink
Hi skyhiker yes it is, and i am somewhat confused about the colorscheme offered by RS Models!
RLM65 under surface is ok but RLM76 and 75(spottling) with yellow wingedge undersides?
Hi skyhiker yes it is, and i am somewhat confused about the colorscheme offered by RS Models!
RLM65 under surface is ok but RLM76 and 75(spottling) with yellow wingedge undersides?
30 April 2023, 22:06
Daniel Klink
Welcome Micky,
Something went completely wrong with that modified engine nacelles by RS!
I checked a dozen times if i got them paired correctly.
Iam just a blink of an eye away- throwing the whole thing out of the window!
Craaaaaaap!
Welcome Micky,
Something went completely wrong with that modified engine nacelles by RS!
I checked a dozen times if i got them paired correctly.
Iam just a blink of an eye away- throwing the whole thing out of the window!
Craaaaaaap!
2 May 2023, 18:33
Daniel Klink
Welcome mates and thanks.
and after seeral cups of coffee...finally...
What further really sucks a bit with this kit is that RS ddd not capture the shape of the wing correctly. it is made as a straight triangle but you can clearly see in the drawing that it has rather a curved shape.
That would have been to much to do this scratch.
Welcome mates and thanks.
and after seeral cups of coffee...finally...
What further really sucks a bit with this kit is that RS ddd not capture the shape of the wing correctly. it is made as a straight triangle but you can clearly see in the drawing that it has rather a curved shape.
That would have been to much to do this scratch.
4 May 2023, 20:11
Bruce Huxtable
Is that crank in the wings visible in the photos? It's clear on the plan, but....?
Is that crank in the wings visible in the photos? It's clear on the plan, but....?
4 May 2023, 20:38
Bruce Huxtable
Thanks for the video, Daniel. The trailing edge definitely has a kink, but I'm not convinced it had a forward kink to the leading edge. If it's there, it's very subtle. I'll have another look on a bigger screen later.
Thanks for the video, Daniel. The trailing edge definitely has a kink, but I'm not convinced it had a forward kink to the leading edge. If it's there, it's very subtle. I'll have another look on a bigger screen later.
5 May 2023, 06:58
Daniel Klink
Color choice is RLM65 undersides. RLM70 upper surfaces with RLM76 sprayed over in shape of a kind of net.
A bit like the Italian Camo on the Macchis.
Color choice is RLM65 undersides. RLM70 upper surfaces with RLM76 sprayed over in shape of a kind of net.
A bit like the Italian Camo on the Macchis.
16 May 2023, 19:37
Daniel Klink
Thank you Cuajete and Welcome Lukasz!
Thats quite a gap Hein? And now rescribing
Thank you Cuajete and Welcome Lukasz!
Thats quite a gap Hein? And now rescribing
21 May 2023, 23:24
Daniel Klink
Now the masks are fitted and the ailerons are prepared!
I hope the day will come, to give this whole thing some color🙄
Now the masks are fitted and the ailerons are prepared!
I hope the day will come, to give this whole thing some color🙄
22 May 2023, 23:32
BAT21
Not yet mounted side windows, but already applied the masks?
With my Ju 86, the two parts fit very badly ... good luck!
Not yet mounted side windows, but already applied the masks?
With my Ju 86, the two parts fit very badly ... good luck!
23 May 2023, 09:34
Daniel Klink
Moin Mates and thank you for watching and your encouraging comments!
@ bat21 dryfit of the bulbed side windows looked very good and no cement used by nowat all!
Last option if it do not work at all, i will show them switched open😁
Like with my 2cv 😁
Moin Mates and thank you for watching and your encouraging comments!
@ bat21 dryfit of the bulbed side windows looked very good and no cement used by nowat all!
Last option if it do not work at all, i will show them switched open😁
Like with my 2cv 😁
23 May 2023, 10:56
Daniel Klink
Fit is ok! Ok it looks abit wild with the maskol now! But after cleaning this should look fine.
A bit of sanding and cleaning necessary betweenn fuselage and canopy. but the fit is better than expected, especially
compared to experiences with this kit so far 🙂
Fit is ok! Ok it looks abit wild with the maskol now! But after cleaning this should look fine.
A bit of sanding and cleaning necessary betweenn fuselage and canopy. but the fit is better than expected, especially
compared to experiences with this kit so far 🙂
23 May 2023, 14:49
Daniel Klink
Thank you mate, very much appreciated👍
This one is a real big one for a twin engine 🙂
Thank you mate, very much appreciated👍
This one is a real big one for a twin engine 🙂
23 May 2023, 19:20
Erik Leijdens
Interesting aircraft! Never seen this version before.
Progress looks great!
Interesting aircraft! Never seen this version before.
Progress looks great!
25 May 2023, 22:14
Daniel Klink
Sprayng yeah!!!! 🙂
Welcome Erik and Bernd, and thank you for your encouraging words👍
Sprayng yeah!!!! 🙂
Welcome Erik and Bernd, and thank you for your encouraging words👍
25 May 2023, 23:00
Daniel Klink
Hi mates,
@cuajete yap kind of it is Uhu Patafix!
bueroshop24.de/uhu-p..WEAQYASABEgKFyvD_BwE
@Jennifer turned out bad in my opinion.
@Roland yap knibbling and the result wasn't funny at all. Too much contrast and the patches are rounder than expected.
Looked very cool at first
Hi mates,
@cuajete yap kind of it is Uhu Patafix!
bueroshop24.de/uhu-p..WEAQYASABEgKFyvD_BwE
@Jennifer turned out bad in my opinion.
@Roland yap knibbling and the result wasn't funny at all. Too much contrast and the patches are rounder than expected.
Looked very cool at first
1 June 2023, 20:46
Daniel Klink
Hi jennifer and Nathan! Thank you very much for your kind words.
I canot imagine the plane could have looked that way. I will redo it with RLM75 and RLM76 vers.2 and will spray it freehand with much smaller single patches.
Hi jennifer and Nathan! Thank you very much for your kind words.
I canot imagine the plane could have looked that way. I will redo it with RLM75 and RLM76 vers.2 and will spray it freehand with much smaller single patches.
7 June 2023, 20:15