Kawasaki Ki.10-II Perry
Comentarii
65 7 April 2023, 22:23
Daniel Klink
Hi mates!
Started another one! The fastest Bi Wing in 1937!
Started with the interior and dryfitting! Forgot how bad that kit is!
The earlier ICM kits appeared like early short run kits😬
Hi mates!
Started another one! The fastest Bi Wing in 1937!
Started with the interior and dryfitting! Forgot how bad that kit is!
The earlier ICM kits appeared like early short run kits😬
8 April 2023, 08:25
Greg Baker
Oh, sign me up. I built this kit once before… and will be again after a shelf mishap… so I'm eager to see what can be accomplished in the hands of a Master.
Oh, sign me up. I built this kit once before… and will be again after a shelf mishap… so I'm eager to see what can be accomplished in the hands of a Master.
8 April 2023, 14:07
Daniel Klink
Welcome Mates..
Fit is..... No Locator pins etc. Unusual for a Injected Kit.
lot of fitting, sanding and finally some more putty...and still the wing roots needs some more of it later on.
@Greg so you are a victim of this softest Plastic sculpting either!? 🙂
Welcome Mates..
Fit is..... No Locator pins etc. Unusual for a Injected Kit.
lot of fitting, sanding and finally some more putty...and still the wing roots needs some more of it later on.
@Greg so you are a victim of this softest Plastic sculpting either!? 🙂
8 April 2023, 14:14
Greg Baker
Yes. Indeed. As I recall, I had lots of trouble getting the wing struts in place. They're angled and weak... all at the same time.
Ironically, this was the Tintin project that took the brunt of my glass shelf disaster, valiantly sacrificing itself thanks to it being the tallest model on the shelf when the shelf above it came crashing down. It must've known that I'd already got another box and had plans to re-attempt a better result. 😉
My earlier work is here - The Blue Lotus (Ki-10 "Perry") | Album by strobez (1:72) if it's of interest. The one thing I was the proudest of was opening up the vent on the nose. It was a bit of work, but worth it for the look in my opinion.
Yes. Indeed. As I recall, I had lots of trouble getting the wing struts in place. They're angled and weak... all at the same time.
Ironically, this was the Tintin project that took the brunt of my glass shelf disaster, valiantly sacrificing itself thanks to it being the tallest model on the shelf when the shelf above it came crashing down. It must've known that I'd already got another box and had plans to re-attempt a better result. 😉
My earlier work is here - The Blue Lotus (Ki-10 "Perry") | Album by strobez (1:72) if it's of interest. The one thing I was the proudest of was opening up the vent on the nose. It was a bit of work, but worth it for the look in my opinion.
8 April 2023, 14:59
Cuajete
Will you make them with wheel fairings? If so, how will you do it?
I was hesitating between this kit from ICM and the one from AviS and I assumed that this one would be easier to build. I prefer a Ki-10 with wheel fairings, but the ICM kit doesn't include them. AviS's does include them, but it seems a little worse and more expensive than ICM's.
Will you make them with wheel fairings? If so, how will you do it?
I was hesitating between this kit from ICM and the one from AviS and I assumed that this one would be easier to build. I prefer a Ki-10 with wheel fairings, but the ICM kit doesn't include them. AviS's does include them, but it seems a little worse and more expensive than ICM's.
8 April 2023, 20:08
Daniel Klink
Hi Mate,
Worse than ICM? 😬 i will do this without wheel fairings cause Katos machine had none in its last configuration😉
Hi Mate,
Worse than ICM? 😬 i will do this without wheel fairings cause Katos machine had none in its last configuration😉
8 April 2023, 20:49
Daniel Klink
Hi Greg, saw your build recently and you are right! Those wing struts are a joke.
How the heck should this work as mentioned by ICM.
I think i'll have to modify them..BTW
Hi Greg, saw your build recently and you are right! Those wing struts are a joke.
How the heck should this work as mentioned by ICM.
I think i'll have to modify them..BTW
9 April 2023, 11:37
Daniel Klink
Hi, Finn, Patryk, James and Lukasz and welcome Mates to the Horror Show!🙁
Hi, Finn, Patryk, James and Lukasz and welcome Mates to the Horror Show!🙁
10 April 2023, 19:27
Slavo Hazucha
cool little japanese plane! 👍🏻 I also find a mesmerizing harmony between the plane and the stand on pic 7... like they were made for each other in a zen-like way... 😄
cool little japanese plane! 👍🏻 I also find a mesmerizing harmony between the plane and the stand on pic 7... like they were made for each other in a zen-like way... 😄
10 April 2023, 19:31
Daniel Klink
Hi Slavo! Thanks mate and welcome!
Very good point😁
Rigging is not zen like anyway!😉
Hi Slavo! Thanks mate and welcome!
Very good point😁
Rigging is not zen like anyway!😉
14 April 2023, 13:14
Daniel Klink
Hi Mates! Thank you all very much for your nice and warm words 👍
@Skyhiker the four main beams are from this set: shop.strato.de/epage..9018/Products/SA7221
The inner rigging is done with EZ line!
Hi Mates! Thank you all very much for your nice and warm words 👍
@Skyhiker the four main beams are from this set: shop.strato.de/epage..9018/Products/SA7221
The inner rigging is done with EZ line!
22 April 2023, 12:57
Monte
Oh, would really like to have this kit, but it looks above my skill level right now. Have been reading about this aircraft in the early stages of the Manchurian conflict. What a cool looking plane!
Oh, would really like to have this kit, but it looks above my skill level right now. Have been reading about this aircraft in the early stages of the Manchurian conflict. What a cool looking plane!
22 April 2023, 20:35
Daniel Klink
Thank you very much mates👍 Your kind and warm words are very much appreciated👍
Finish line in sight now!
Thank you very much mates👍 Your kind and warm words are very much appreciated👍
Finish line in sight now!
23 April 2023, 21:55
Daniel Klink
Thank you alll so much for your nice and warm comments mates! Very much appreciate them!👍
Perry is finished now!
It was not an easy built and i would not recommend the kit at all!
Thank you alll so much for your nice and warm comments mates! Very much appreciate them!👍
Perry is finished now!
It was not an easy built and i would not recommend the kit at all!
24 April 2023, 13:57
Daniel Klink
Thank you very much Greg, Moreno and Roland👍
Your nice words are very welcome😉
@greg your project gave me useful hints wirh this one👍👍
Thank you very much Greg, Moreno and Roland👍
Your nice words are very welcome😉
@greg your project gave me useful hints wirh this one👍👍
24 April 2023, 16:38
Cuajete
Very nice and great result, Daniel. It was worth the effort 👍
A delight for the eyes 👌
Congrats!
Very nice and great result, Daniel. It was worth the effort 👍
A delight for the eyes 👌
Congrats!
24 April 2023, 20:18
Michael Kohl
Turning a crude kit into something very presentable should give a special feeling of satisfaction. Enjoy!
Turning a crude kit into something very presentable should give a special feeling of satisfaction. Enjoy!
25 April 2023, 06:50
Daniel Klink
Thank you all mates for your overwhelming positive feedback.
This really is not an easy built and surely there is still much room for Improvement but i am happy with the result.
And all your nice and warm comments are very muc appreciated.
Thank you all mates for your overwhelming positive feedback.
This really is not an easy built and surely there is still much room for Improvement but i am happy with the result.
And all your nice and warm comments are very muc appreciated.
27 April 2023, 22:35
Daniel Klink
Thank you very much Patryk!
Your warm words are very much appreciated!👍
Thank you very much Patryk!
Your warm words are very much appreciated!👍
5 May 2023, 14:10
J Hess
I have one, but its sitting in the storage spot. I did build two Hasegawa ones, those were a chore as well.
I have one, but its sitting in the storage spot. I did build two Hasegawa ones, those were a chore as well.
12 May 2023, 01:44
Album info
China 1938