T204 Project
1
February 6, 2023220605: Box contents.2
February 6, 2023220605: Box contents.3
February 6, 2023220605: Box contents.4
February 6, 2023220605: Box contents.5
February 6, 2023220605: Box contents.6
February 6, 2023220605: Box contents.7
February 6, 2023220607: Windiws will be filled with clear acrylic resin. Tape is high-temp polimyde electrical tape.8
February 6, 2023220610: Cutting an access hole.9
February 6, 2023220831: Engine components.10
February 6, 2023220831: Front office. Panels are black decal film.11
February 6, 2023220831: Front office. Panels are black decal film.12
February 6, 2023220831: Front office trial fit.13
February 6, 2023220909: Lead tyre weight for ballast (sealed in 5-minute Epoxy).14
February 6, 2023220909: Front office secured in place.15
February 6, 2023220909: You won't be able to see the instrument panel, but I'll know it's there!16
February 6, 2023220909: Front office minus the windshield glass.17
February 6, 2023220919: Installing the socket for the in-flight display stand.18
February 6, 2023220919: Sealing up the MLG wells. Fit here is impressive!19
February 6, 2023221017: Windshield piece is slightly off. Here it is mated perfectly on the left side...20
February 6, 2023221017: ...and overhanging slightly on the right side. Tricky.21
February 6, 2023221019: Installing a brass spar to help secure and set dihedral for the hz. stabs.22
February 6, 2023221019: Installing a brass spar to help secure and set dihedral for the wings. Glue is 5-min Epoxy.23
February 6, 2023221019: Aloft on her new "flying" feet.24
February 6, 2023221023: Windshield after glued in place under sliver paint pen.25
February 23, 2023221023: Windshield with paint removed with Isopropyl Alcohol.26
March 1, 2023221029: Applying windshield masks (by KV Masks - excellent addition!)27
September 14, 2023221029: Engine nacelles (excellent fit!)28
March 1, 2023221106: Applying these is tedious. 108 or so at about 5 per minute.29
March 1, 2023221106: Applying these is tedious. 108 or so at about 5 per minute.30
March 1, 2023221106: Applying these is tedious. 108 or so at about 5 per minute.31
March 1, 2023221123: Fuselage in Mr. Hobby HUG-01 RX-78-2 Gundam White32
March 1, 2023221123: Fuselage in Mr. Hobby HUG-01 RX-78-2 Gundam White33
March 1, 2023221126: Gotta fix a blemish.34
March 1, 2023221126: Fixed a blemish.35
March 1, 2023221126: Wings uppers and undersides in Tamiya XF-80 Royal Light Grey (a.k.a. "Boeing Grey").36
March 1, 2023221126: Wings uppers and undersides in Tamiya XF-80 Royal Light Grey (a.k.a. "Boeing Grey").37
March 1, 2023221127: Almost there, ready for those big, ambitious decals.38
March 1, 2023221127: Ready for those big, ambitious decals (will this work?)39
March 1, 2023221127: Fuselage markings worked beautifully! Had to cut out each letter, though, for proper spacing.40
March 1, 2023221127: Wing decals also went on like a charm.41
March 1, 2023221127: Minor decals were on perfectly thin and conforming.42
March 1, 2023221127: Forward part of the large red decal went on beautifully.43
March 1, 2023221127: The problem was with the aft part. It would not conform, then became welded to the fuselage (unable to float it into position).44
March 1, 2023221127: Aft part of the red decal would not move or conform.45
March 1, 2023221127: Aft part of the red decal would not move or conform.46
September 14, 2023230221: (Three months later...) Finally got the nerve to strip the failed decal for painting.47
September 14, 2023230221: Aft fuselage decal removed and masked for paint application.48
September 14, 2023230221: Aft fuselage decal removed and masked for paint application (note trial) Color is Vajello Model Color 70.947 Dark Vermilion.49
September 14, 2023230221: Vallejo Model Color 70.947 Dark Vermilion cut 50:50 with Vallejo Airbrush Thinner, plus two drops Vallejo Flow Improver.50
September 14, 2023230221: Vallejo Model Color 70.947 Dark Vermilion cut 50:50 with Vallejo Airbrush Thinner, plus two drops Vallejo Flow Improver.51
September 14, 2023230221: Nose gear doors, too52
September 14, 2023230221: Vallejo goes down perfectly flat. I need a shine...53
September 14, 2023230221: Vallejo goes down perfectly flat. I need a shine...54
September 14, 2023230221: Here she is after a coat of Future floor wax.55
September 14, 2023230224: Decal application continues with (laser printed) registration codes for the accident aircraft.56
September 14, 2023230228: Rollout57
September 14, 2023230228: Rollout58
September 14, 2023230228: Rollout59
September 14, 2023230228: Rollout. I'm pleased with the color match (Vallejo Model Color 70.947 Dark Vermilion).60
September 14, 2023230329: Ready for delivery61
September 14, 2023230329: Ready for delivery62
September 14, 2023230329: Ready for delivery63
September 14, 2023230329: Ready for delivery64
September 14, 2023230329: Ready for delivery65
September 14, 2023230329: Ready for delivery66
September 14, 2023230329: Ready for delivery67
September 14, 2023230329: Ready for delivery68
September 14, 2023230330: first revenue flight.69
September 14, 2023230330: first revenue flight.70
September 14, 2023230330: first revenue flight.71
September 14, 2023230330: first revenue flight.72
September 14, 2023230330: first revenue flight.73
September 14, 2023230330: first revenue flight.74
September 14, 2023230330: first revenue flight.75
September 14, 2023230330: first revenue flight.76
September 14, 2023230330: first revenue flight.77
September 14, 2023230330: first revenue flight.78
September 14, 2023230330: first revenue flight.79
September 14, 2023230330: Last revenue flight after sanctions.80
September 14, 202381
September 14, 202382
September 14, 202383
September 14, 202384
September 14, 2023
Comentarii
16 6 February 2023, 05:30
Album info
Red Wings Airlines Flight 9268 c. 2012
(Tupolev Tu-204-100 in 1/144 scale, Zvezda kit # 7023 @2017 (2018 release).
Red Wings Airlines Flight 9268 was a Tupolev Tu-204-100 passenger jet that crashed on landing at Moscow Vnukovo Airport, Russia (UUWW (VKO) on 29 December 2012, following a repositioning flight from Pardubice Airport, Czech Republic. Through a combination of weather and wind effects, design features, and pilot error, the aircraft overran the runway on landing and hit a ditch and highway structures - and an unfortunate car. There were no passengers on board, but 5 of the 8 crew members were killed.
May they rest in peace.