Z-37 Čmelák

1
September 27, 2021
The detailing of the kit / cockpit is stunning!
2
September 27, 2021
3
September 27, 2021
0,0 extra parts = very good result.
4
September 27, 2021
The fit & engineering of the sidewalls is excellent.
5
September 27, 2021
6
September 29, 2021
The fit is overall excellent. No filling required. The double slotted flaps are well visible (main flaps not installed yet).
7
September 29, 2021
8
September 29, 2021
9
October 2, 2021
As usual I use wire 0,3mm for attachment of flaps and similar parts. So it’s easier to reach the correct position and angle.
10
October 2, 2021
As usual I intend to paint the flaps and stabilizer separately.
11
October 2, 2021
12
October 3, 2021
Unfortunately the precut vinyl masks are to small and has wrong shape. So I had to replace them.
13
October 3, 2021
14
October 5, 2021
15
October 5, 2021
16
October 5, 2021
17
October 5, 2021
After applying Agama's green fluid (green fluid = adhesol aka mix of softener & decalglue).
18
October 6, 2021
The most difficult decals in place. After applying Agama's green and black fluids and overspraying with H135 (semimat varnish) the carrier film is practically invisible. 🙂
19
October 6, 2021
20
October 11, 2021
21
October 11, 2021
22
October 11, 2021
Washing and filtering completed.
23
October 13, 2021
Anti skid surface created as usual of airbrushed decalfilm (unthinned dark grey paint and low pressure)
24
October 13, 2021
25
October 13, 2021
26
October 13, 2021
27
October 13, 2021
28
October 13, 2021
29
October 13, 2021
30
October 13, 2021
31
October 13, 2021
32
October 13, 2021

Comentários

41 27 September 2021, 13:25

bughunter
Oh, the next one of the agro-chemical weeks 👍 I'm in the first row here!

27 September 2021, 13:39

Spanjaard
first row for me too 🙂

27 September 2021, 13:58

Dietmar Bogatzki
for me too 😉

27 September 2021, 16:24

Hanno Kleinecke
Manure- bomber the second ! 😄. Checkin' in as well. What was the job of the man in the back seat, stirring up the tank's content ? 😄

27 September 2021, 17:02

Bernhard Schrock
Moin Hanno. Hab eben bei Wiki nachgelesen: beim Wechsel der Agrarbereiche konnte der zuständige Mechaniker mitfliegen und sich um „sein" Flugzeug durchgängig kümmern. Es ist wohl keine Lümmelcouch aber immerhin gepolstert🙂

27 September 2021, 17:40

Bernhard Pethe
Bernhard, ein Flieger, der zu Deinen Namen passt.
Das schau ich mir an. Ein Flieger mit dem ich 1878 Flugstunden gemacht habe. 😉

27 September 2021, 18:33

Bernhard Schrock
Bernhard: dann habe ich aus deiner Sicht mit der Typenwahl ins Schwarze getroffen... 1878 Stunden: seeeehr beachtlich. Ist unter den Markierungen im Bausatz vielleicht sogar „Deine" Maschine dabei?

27 September 2021, 19:13

Hanno Kleinecke
Ahh, na klar, das ergibt Sinn! Danke für die Erleuchtung 🙂

27 September 2021, 20:09

Bernhard Pethe
Nein, das war eine Vielzahl von unterschiedlichen Kennzeichen über mehrere Jahre. Man kann aber an Hand der Decals jede deutsche Kennung zusammenstellen.
Die erste war die DM-SQO, die letzte DM-SRP.

28 September 2021, 08:35

Augie
Ooo I am in for this rare bird.

28 September 2021, 08:40

bughunter
I would also vote for a Interflug livre! I loved the yellow "Hummel" as a child 🙂

28 September 2021, 11:46

Bernhard Schrock
Hej. Habe ich überlegt aber mich zur Ehren vom Hersteller (Zlin) für die tschechische Version entscheiden.

28 September 2021, 13:31

bughunter
Oh, that is for sure a valid reason! The white/yellow with the red stripe from your projects picture looks nice 👍

28 September 2021, 14:49

Zbynek Honzik
I'm very happy Bernhard, that you decided to build this plane! I'll be watching the build and looking forward to seeing the result. I have no doubt it will be another masterpiece. 👍

29 September 2021, 21:57

Alec K
Taking a seat as well. Was not aware of this kit. Great detailing as always 👍

2 October 2021, 20:17

Bernhard Pethe
Bernhard, Achtung, der Ölkühler war auf der rechten Seite.

3 October 2021, 12:57

Bernhard Schrock
Oops… danke für den Hinweis, Bernhard. In der Tat. Werde ich gleich ändern.

3 October 2021, 13:14

bughunter
Impressive build again, this time mostly oob? I really like the details on the wing surface, this will look fantastic with paint.

5 October 2021, 05:17

Bernhard Schrock
Moin moin bughunter. Yep: nearly OOB🙂 because the detailing of the kit is outstanding. I intend to replace only the grips and door handles with wire. Yesterday I finished the third paint session (yellow). I will post pictures today.

5 October 2021, 06:05

Hanno Kleinecke
Aaahh, pretty yellow ! 😄 das Agama - Zeug wirkt auch in diesem Fall Wunder: Schmiegt sich perfekt an, kein Trägerfilm zu sehen !

5 October 2021, 18:29

bughunter
On that surface your result is even hard to reach with masking, so congrats 👍
Wundermittelalarm?

8 October 2021, 18:13

Bernhard Schrock
Moin Jungs. Das Trio von Agama ist klasse und der starke der beiden Weichmacher der sprichwörtliche Hammer! Der kriegt jedes Decal klein.🙂 Allerdings so wie in der Anleitung geschrieben Finger weg nach dem Aufbringen und das Decal in Ruhe lassen. An einer Stelle glaubte ich eine Luftblase andrücken zu müssen ubd wurde sofort bestraft!🙁 Zum Glück ließ sich das Schwarz schnell ausbessern.

9 October 2021, 04:26

Juergen Klinglhuber
Ein weiters 👍-Projekt - schaut super aus!

10 October 2021, 19:26

Daniel Klink
Saucool Bernhard! Macht echt was her die Agrarmühle!

11 October 2021, 19:27

Robert Podkoński
Simply stunning - looks absolutely realistic!

12 October 2021, 19:32

bughunter
Wie, schon fertig? Klasse!
Ich habe das Original leuchtender und glänzender in Erinnerung, aber das ist schon lange her.

12 October 2021, 20:00

Augie
Wow Bernhard, you did it again, stunning m8

12 October 2021, 20:00

Hanno Kleinecke
Tadaa, fertig ! Wonderful result in this colourful livery, unique bird !

12 October 2021, 21:33

Spanjaard
Excellent result!

12 October 2021, 22:06

Alec K
Beautifully done Bernhard 👍

12 October 2021, 22:21

Villiers de Vos
Very nicely done.

13 October 2021, 02:42

Neuling
Another beauty! 👍

13 October 2021, 08:37

Ricardo Reis
Very nice indeed, congrats!!!

13 October 2021, 08:40

Bernhard Pethe
Bernhard, nett anzuschauen. 😉

13 October 2021, 09:56

Erik Leijdens
Fantastic little beauty Bernhard! 👍

13 October 2021, 11:06

Sebastian Meyner
That is some beautiful work Bernhard 👍

13 October 2021, 11:46

LucLuke B
So sharp!

13 October 2021, 12:06

Daniel Klink
So authentic and brillantly done wow!!!!!
Museumquality 👍

13 October 2021, 12:10

Bernhard Schrock
Thank you Mates. I'm glad that you like my OOB project. I was a kind of test if it is possible for me to build a kit OOB without the hi tec aftermarket products🙂.

14 October 2021, 14:36