Steampunk Regatta
1
June 11, 20172
June 11, 20173
June 11, 20174
June 11, 20175
June 11, 20176
June 11, 20177
June 11, 20178
June 11, 20179
June 11, 201710
June 11, 201711
June 11, 201712
June 11, 201713
June 15, 2017First boat is almost complete...14
June 15, 2017...my added pedals are non-workable, though...15
June 15, 2017these are the parts from the Airfoil steam engine...16
June 15, 2017...which I like a lot (in contrast to the Caranado boat kit: the fit of the parts is horrible at best and min-bogglingly disastrous at worst17
June 18, 2017Dry fitting of hull, seats and steam engine...18
June 18, 2017...revealed that more dry fitting is required 🙁19
June 19, 2017Phase 5: the 1/72 WW1 Austrian helicopter prototype is in 1:24 just big enough for a tiger-lynx-bobcat20
June 19, 2017Which may or may not stay there in the final diorama 🙂21
June 25, 2017instrument panel from the kit from some other decals and 1 mm "lights"22
June 25, 2017All major parts finished, waiting for final assembly (next weekend, maybe)23
July 2, 2017Slowly coming together. The clumsy windshield might be a goner, later...24
July 2, 2017...the large water wheel might look a tad big for the small beat...25
July 2, 2017...I like the stripped-down steam engine, though26
July 8, 2017Coal shoveling lady got an extra piece of apparel to be more decent (this is still a somewhat prude if alternative Victorian world)27
July 8, 2017The drone platform is temp connected, probably I use four beams at the end28
July 8, 2017Every body needs a "Windrichtungsanzeiger" (wind direction indicator) - OK, for a motor boat it makes little sense.29
July 15, 201730
July 15, 201731
July 15, 201732
July 15, 201733
July 15, 201734
July 29, 20171st water layer - more to do...35
July 29, 20171st water layer - more to do...36
August 6, 2017almost finished...37
August 6, 2017...more water, foam, ...38
August 6, 2017...and fine tuning...39
August 6, 2017...then I call it complete.40
August 12, 2017When a moron (the one typing this lines) adds too much translucent material...41
August 12, 2017...so that it it no longer translucent any more 🙁 (I hope another day and night of drying will help...)42
August 14, 201743
August 14, 201744
August 14, 201745
August 14, 201746
August 14, 201747
August 14, 2017
Comentários
8 September 2024, 17:43 -
Album info
almost finished