paper modeling database | stash manager
Dominik
Dominik Weitzer (Dominik)
DE

WIP - 1965 Shelby Mustang GT 350 H

Comments

7 7 November 2021, 18:09
Dominik Weitzer
all around i see only black Hertz Mustangs - but it had more colors than that. So i decided the wimbledon white.

i build that similar to the ivy green Fastback 😉
7 November 2021, 18:17
István Szücs
If I remember correctly, a white Shelby Mustang was in the November Rain video. The stripes will blue, or gold (I think, the gold is soooo cool)?
7 November 2021, 19:07
Dominik Weitzer
i will go with gold - i like that!
7 November 2021, 19:29
István Szücs
Great!
7 November 2021, 19:50
Bob Hall
A little history and great pics of the Shelby / Hertz relationship in the mid 60's

diyford.com/shelby-m..t350h-starting-grid/
7 November 2021, 22:53
Dominik Weitzer
Thanks Istvàn and Bob 😉
Aaaand thanks Bob for the very interesting link. I knew, i'm in good hands, if you drop in :-D . could it be, that some white Hertz Mustangs had no stripes? have i read that right?
8 November 2021, 08:53
Bob Hall
A very few, along with the Red and Green had no Top Stripes. And the first ones had the Cragar wheels.
8 November 2021, 18:28
Dominik Weitzer
Thank you Banjamin, thank you bob. Interesting!
9 November 2021, 08:10
Dominik Weitzer
Same work on the Hertz. It is good, to work on two (or more) models at the same time :-D .
made the BMF on the body and a clearcoat. comleted the interior and "hurry" up to the decals.
14 November 2021, 12:30
Dominik Weitzer
After two hours the stripes were on. without cracking (a little bit), with some spots with decalsofter - but it worked out.
As you see, my strpes are not as narrow to each other...i cuttet them in length also :-D ...and layed on part for part.
Decals went on the grill and water reservoir too.

up to clearcoat 😉

btw: interior is only dropped in to have a look to the narrow end
18 November 2021, 19:18
Brandon H
Gold stripes are lookin' sweeeet! Keep up the good work!
19 November 2021, 13:28
István Szücs
Looks so good!
19 November 2021, 14:14
Dominik Weitzer
...and as always...if the finishline comes up, it goes fast.

after i cracked three driller i thought about, not to wiring the engine. but i decided to make it.
after wiring, i installed the engine and glued all in place. the same problem - a warped chassis - was fitted during the glueing the rear end into the body, and than the frontframe.
than, the completing was fast.
bwefore christmas, i call it done.
I'm not happy with the stripes on the vents in front of the windshield, but overall it looks very nice.
5 January 2022, 10:59
Christian W
I can remember your shocking face, when you broke two drills that evening 😄 unpayless
8 January 2022, 06:20

Album info

all around i see only black Hertz Mustangs - but it had more colors than that. So i decided the wimbledon white.

32 images
1:24
Completed
1:24 Shelby Mustang GT 350 H (Revell 07242)

All albums

View all albums »