Voyager Space Probe

1
July 24, 2022
2
July 24, 2022
3
July 24, 2022
4
July 24, 2022
5
July 24, 2022
6
July 24, 2022
7
July 24, 2022
8
July 24, 2022
9
July 24, 2022
10
July 29, 2022
finished the radionucleide batterie
11
July 29, 2022
Planetary radio astronomy and plasma wave antenna added
12
July 29, 2022
Golden record in acryl as a pedestial for the finished spaceprobe later
13
July 30, 2022
glueing the box and the etched pyramidal connection to the magnetometer boom was a bit fiddly. EDUARD´s manual was also very vague about it
14
July 30, 2022
The magnetometer boom should have a 120° twist in its longitude axis as the real one have. But I did not found a safe way to manage it without bending or even destroying the whole fragile etched boom so I left it as it ist without the twist. Dont tell anyone...
15
July 30, 2022
Now it looks already like a spaceprobe. Just the main high gain antenna missing!
16
July 31, 2022
Finished the last component of the space probe - the high gain antenna. Some parts were replaced again with etched parts and some cableing with etched parts added
17
July 31, 2022
just the golden record is still missing now. This will be installed only in the very end after the probe is completely painted
18
July 31, 2022
The finished object
19
July 31, 2022
Disaster strucked during priming of the surfaces. I did holded the spaceprobe at the magnetometer antenna. At the last stage (maybe 2 Minutes left) the antenna suddenly snapped and the probe fell down. I also sprinkled primer out of the airbrush over my desk. What a mess ?
20
July 31, 2022
I am not sure but I think this etched antenna is beyond repair... maybe its the best to buy another etched set ?
21
July 31, 2022
The girders for the radionucleide battery also got loose and the boom with the experiments also got loose
22
July 31, 2022
The cameras also disintegrated. A serious blow for my morale ?
23
October 23, 2022
I was finally able to buy a new etched set to replace the damaged magnetometer antenna
24
October 23, 2022
Started to paint the details
25
October 23, 2022
26
October 23, 2022
replaced the demolished magnetometer antenna with a new one
27
October 23, 2022
Eduard´s etched surfaces of the visible screwnuts is nicely visible after a drybrush with light grey
28
October 23, 2022
golden record inserted and represented the white seams of the special covering around the main hull and extension arms
29
October 23, 2022
30
October 23, 2022
31
October 23, 2022
Finally finished
32
October 23, 2022
finished painting of the cameras and the white seams of the special sealing coverings around it
33
October 23, 2022
34
October 23, 2022
35
October 23, 2022
36
October 23, 2022

Komentarzy

48 24 July 2022, 13:31

Torsten
Magnificent 👍

24 July 2022, 14:02

John Thomas
Very cool

24 July 2022, 14:11

Thomas Wirsching
Thank you, I am glad you like it so far 😇🖐

24 July 2022, 14:14

bughunter
Looks great! The PE seems to be a nice improvement 👍
Where is this famous golden phonograph record attached? I mean now the original, inside?

24 July 2022, 14:39

Thomas Wirsching
Thank you, the golden record is attached at the outside of the main body. You can see it at the kit´s box if you look at the first picture of the project. Eduard have this disc inside and it is much better then the kit´s one.

24 July 2022, 16:00

Dash Rendar
Very nice, looks awesome!

24 July 2022, 16:13

Thomas Espe
Looks very good!

24 July 2022, 18:28

Michael Prator
Great kit and fun build!

26 July 2022, 12:29

bughunter
The pedestal looks great 👍

29 July 2022, 16:22

Jörg Schäfer
Tolles Modell und sauber gebaut. 👍

30 July 2022, 10:06

Thomas Wirsching
Thank you all 😇
@Jörg: Ich mache mich schonmal geschmeidig für meine Yamato, da kommen ganz viele Extras dazu😋

30 July 2022, 10:33

Jörg Schäfer
Ja man, ein Träumchen. 👌

30 July 2022, 11:02

bughunter
I hope the little disc will be plated with leaf gold 😉

31 July 2022, 16:13

Thomas Wirsching
@bughunter: hehe nice idea but this will overstretch my modest financial abilities 😅

31 July 2022, 16:54

Thomas Wirsching
Until now very few accidents happened during my modelling journeys but today accident struck - during priming with the airbrush I did hold the probe at the magnetometer antenna (don´t say you shouldn´t do that...). Shortly before finishing the antenna suddenly folded down and broke off. I spilled color out of the airbrush onto my desk. The radionucleide battery also got loose and the boom with the cameras also disintegrated. My morale is very low now, don´t know if I can repair the boom and finish up this project. Need a beer now... 🤬🔨

31 July 2022, 17:11

Jörg Schäfer
Verdammt wie ärgerlich. Das tut mir leid für dich.
Nach dem Bier wird es dir besser gehen und du wirst den Schaden beheben. 😉

31 July 2022, 19:08

Spanjaard
It is looking good, keep at it, I am sure you can repair it

31 July 2022, 19:23

Thomas Wirsching
Project Voyager finally successful finished today. I am glad about the final outcome. Thank you all for your interest, for watching and your encouraging comments 😉

23 October 2022, 04:16

Jörg Schäfer
Wie geil, der Thomas hat es wieder hin bekommen. 👍
Und es ist wirklich klasse geworden. 😎

23 October 2022, 06:37

Torsten
Your work turned out very nice, the set from Eduard made it even more valuable. I also like your presentation with the display stand very much. Top finish! 😎

23 October 2022, 06:46

Thomas Wirsching
@Jörg: Ja dank des letzten verfügbaren Ätzteilesatz vom Sockelshop konnte ich das Ding endlich fertigstellen😇

23 October 2022, 07:11

Thomas Wirsching
@Torsten: Thank you mate, I am glad you like my work 😇

23 October 2022, 07:12