Vickers Wellington Mk.III Bat21 and Klink with Wimpyfever.
Komentarzy
96 21 June 2022, 13:40
Gary Kitchen
Looking forwards to this getting your usual masterful treatment Daniel. This was one of my first kits as I returned to modelling and I loved it. Have fun. 👍.
Wellington MK III | Album by Erebus Nyx (1:72)
Looking forwards to this getting your usual masterful treatment Daniel. This was one of my first kits as I returned to modelling and I loved it. Have fun. 👍.
Wellington MK III | Album by Erebus Nyx (1:72)
22 June 2022, 06:15
Daniel Klink
Hello Ben and Gary and a warm welcome to you Mates..
But a little patience is needed here because the ineterior (though not much will be séen in the end) is more than overdone by Trumpeter.
So it will take a while before progress will be seen her🙂
Hello Ben and Gary and a warm welcome to you Mates..
But a little patience is needed here because the ineterior (though not much will be séen in the end) is more than overdone by Trumpeter.
So it will take a while before progress will be seen her🙂
26 June 2022, 14:53
Cuajete
It doesn't matter how much time passes, Daniel. I'll be there to see the progress.
Following!
It doesn't matter how much time passes, Daniel. I'll be there to see the progress.
Following!
26 June 2022, 16:57
Daniel Klink
Welcome Mates, glad you are interested and thanks for the patience..👍
Welcome Mates, glad you are interested and thanks for the patience..👍
29 June 2022, 18:51
Łukasz Gliński
"Wow!!! And you will see nearly nothing in the end." So, why bother ? 😛
What camo? Checkerboards perhaps?
"Wow!!! And you will see nearly nothing in the end." So, why bother ? 😛
What camo? Checkerboards perhaps?
30 June 2022, 14:02
bughunter
Also with the crazy PART set for the bomb bay? _THAT_ would be a "real Etching orgy" (borrowed from your intro text) 😉
scalemates.com/kits/..-ic-bomb-bay--152228
Also with the crazy PART set for the bomb bay? _THAT_ would be a "real Etching orgy" (borrowed from your intro text) 😉
scalemates.com/kits/..-ic-bomb-bay--152228
10 November 2022, 11:33
Daniel Klink
Hi cuajete and Oleg!
Thanks mates, but you will really see nothing after all!
If you wonder about the red brown parts!
They used a red brown primer coat outside that soaked into the fabric skin !
Hi cuajete and Oleg!
Thanks mates, but you will really see nothing after all!
If you wonder about the red brown parts!
They used a red brown primer coat outside that soaked into the fabric skin !
17 November 2022, 08:34
Daniel Klink
Hi Marcel and Robin and a warm welcome and thank you for your interest mates 👍
Hi Marcel and Robin and a warm welcome and thank you for your interest mates 👍
26 November 2022, 22:55
Daniel Klink
Hi, Trumpeter did a good job with the montage of the wings and Ailerons👍
You can easily take them off for painting or transport and the fit is very good!
Hi, Trumpeter did a good job with the montage of the wings and Ailerons👍
You can easily take them off for painting or transport and the fit is very good!
28 November 2022, 13:50
Daniel Klink
Hi mates yes easy click😁
Nothing glued yet all just „clicked together😉
Hi mates yes easy click😁
Nothing glued yet all just „clicked together😉
1 December 2022, 11:12
Daniel Klink
Hi lukasz!
The wing halves are of course glued sorry😉
Also i will glue the fuselage halves😉
But you can easily take off the main wings and ailerons😉
Hi lukasz!
The wing halves are of course glued sorry😉
Also i will glue the fuselage halves😉
But you can easily take off the main wings and ailerons😉
1 December 2022, 11:57
Gary Kitchen
Loving the crew detail, especially the dynamic pose of the crew member moving between sections 👍
Loving the crew detail, especially the dynamic pose of the crew member moving between sections 👍
1 December 2022, 13:12
Daniel Klink
Hi Mates! Thanks and really happy you like the progress
Though the crew figures are a bizt oversized!
Had to do some surgery on the pilot to make hin fit into the Cockpit😁😉
Hi Mates! Thanks and really happy you like the progress
Though the crew figures are a bizt oversized!
Had to do some surgery on the pilot to make hin fit into the Cockpit😁😉
5 December 2022, 13:43
Gary Kitchen
Hi Daniel, I did wonder about the scaling of this Wimpy when I finished mine as it does not seem very big when sat alongside a 1:72 Spitfire for example. Having not seen two such aircraft side by side in real life I wasn't sure. So do we think the plane is undersized or the figures oversized, I'm just not sure? Genuine question? But should a 1:72 scaled anything, sat alongside a 1:72 scale something else, accurately reflect the proportions of their real-life counterparts?
Hi Daniel, I did wonder about the scaling of this Wimpy when I finished mine as it does not seem very big when sat alongside a 1:72 Spitfire for example. Having not seen two such aircraft side by side in real life I wasn't sure. So do we think the plane is undersized or the figures oversized, I'm just not sure? Genuine question? But should a 1:72 scaled anything, sat alongside a 1:72 scale something else, accurately reflect the proportions of their real-life counterparts?
5 December 2022, 14:53
Daniel Klink
God Point, but thePilot did not fit into the seat in any way.. Thats a fact🙂
God Point, but thePilot did not fit into the seat in any way.. Thats a fact🙂
8 December 2022, 00:01
Daniel Klink
Hi Mate, thanks and no most of the weathering and shading will be done after painting.
The special structure of the Wimpy u know?🙂
Hi Mate, thanks and no most of the weathering and shading will be done after painting.
The special structure of the Wimpy u know?🙂
8 December 2022, 18:29
Cuajete
It will be a pleasure to see the results of a great master expert like you again 🙂 👍
It will be a pleasure to see the results of a great master expert like you again 🙂 👍
8 December 2022, 19:15
Daniel Klink
Too much honor Cuajte you are making me blush...
Thank you Villiers...👍
Meanwhile the main camowork is done..
Too much honor Cuajte you are making me blush...
Thank you Villiers...👍
Meanwhile the main camowork is done..
9 December 2022, 18:24
Cuajete
Decals looks so good, Daniel. Did the decals adapt well to the skeletal cloth of the model?
Decals looks so good, Daniel. Did the decals adapt well to the skeletal cloth of the model?
11 December 2022, 17:51
Daniel Klink
Thank you very much mates for your warm and nice comments 👍
The decals are not that good and a lot of Gunzes Softener was needed.
But the biggest mistake as always had been made by the modeler. I confused the position for the exhausts with the ones for the Mk.I.
Trumpeter does not note that in their manual that you just have to change the cowlings with each other but a good look at reference pics would have helped.
So stupid but i will put the blame for this to my lack of experience with RAF planes. 🙂
Thank you very much mates for your warm and nice comments 👍
The decals are not that good and a lot of Gunzes Softener was needed.
But the biggest mistake as always had been made by the modeler. I confused the position for the exhausts with the ones for the Mk.I.
Trumpeter does not note that in their manual that you just have to change the cowlings with each other but a good look at reference pics would have helped.
So stupid but i will put the blame for this to my lack of experience with RAF planes. 🙂
11 December 2022, 18:43
Bernd Grün
Very nice build of that Wellington, Daniel. It's turn out impressive. 👍
Very nice build of that Wellington, Daniel. It's turn out impressive. 👍
13 December 2022, 10:54
Jv
Very butiful model and work
Now just get your bread knife out and cut it in half
So all can see all the fabulous detail
Very butiful model and work
Now just get your bread knife out and cut it in half
So all can see all the fabulous detail
14 December 2022, 21:22
Daniel Klink
Wow! Thank you all so much gentlemen for your nice and warm words..
Very much appreciated..👍
@JV yap this is really a pity that you do not see anything once the halves are closed.
Wow! Thank you all so much gentlemen for your nice and warm words..
Very much appreciated..👍
@JV yap this is really a pity that you do not see anything once the halves are closed.
15 December 2022, 19:47
Jv
Yes your right bit atleast we got to see it here before
You put it together but yes I think this one should be cut in half to see all the work inside
Fantastic work and a butiful model
Yes your right bit atleast we got to see it here before
You put it together but yes I think this one should be cut in half to see all the work inside
Fantastic work and a butiful model
16 December 2022, 00:01
Daniel Klink
Thanks again Mates for your really nice words..
But it is still not ready yet 🙂
Thanks again Mates for your really nice words..
But it is still not ready yet 🙂
16 December 2022, 20:17
bughunter
Your results are better and better 👍
@David That looks like a cutting mat?
Your results are better and better 👍
@David That looks like a cutting mat?
19 December 2022, 20:16
Daniel Klink
Thank you so much mates for your nce and warm words!
@David yes and a cutting mat, you are both right! I have to really work over my fotografic efforts.
@Frank Thank you so much mate, and i am relly proud you see progress in my projects..
Just a few months til Wilnsdorf mate 👍
Thank you so much mates for your nce and warm words!
@David yes and a cutting mat, you are both right! I have to really work over my fotografic efforts.
@Frank Thank you so much mate, and i am relly proud you see progress in my projects..
Just a few months til Wilnsdorf mate 👍
19 December 2022, 20:53
Lochsa River
Sweet build!
one impression....the wings look more weathered than the fuselage...a bit of a mismatch...
Sweet build!
one impression....the wings look more weathered than the fuselage...a bit of a mismatch...
19 December 2022, 20:53
Cuajete
Great result and fantastic dio, Daniel 👌
Congrats!
Also Bedford looks really good! It's the old Airfix's tool?
Great result and fantastic dio, Daniel 👌
Congrats!
Also Bedford looks really good! It's the old Airfix's tool?
19 December 2022, 20:56
Łukasz Gliński
Very nice finish mate! The rear fuselage is a bit too clean indeed, but I love the fabric shading on the wings, turned out great 👍
Very nice finish mate! The rear fuselage is a bit too clean indeed, but I love the fabric shading on the wings, turned out great 👍
19 December 2022, 21:17
Daniel Klink
Thanks mates, very much appreciate your kind words.....
And you really got a point there Lochsa and Lukasz.. I think i should add a bit of dust and rainmarks there too
But anyway there are a few things more that went wrong. As already mentioned i confused the positions of the exhaust with the Mk.IC
Hence the reargun on the backboard side went missing so i have to wait for replacement..
Thanks mates, very much appreciate your kind words.....
And you really got a point there Lochsa and Lukasz.. I think i should add a bit of dust and rainmarks there too
But anyway there are a few things more that went wrong. As already mentioned i confused the positions of the exhaust with the Mk.IC
Hence the reargun on the backboard side went missing so i have to wait for replacement..
19 December 2022, 21:34
Neuling
Looks very good the way it is. The missing rear gun obviously is off for repair .............
Looks very good the way it is. The missing rear gun obviously is off for repair .............
20 December 2022, 09:26
Daniel Klink
Many thanks, James, Kyle, Villiers, Bernd, Robin, Michael, Neuling, Alec and Christoph 👍
Really glad you like the outcome👍
Many thanks, James, Kyle, Villiers, Bernd, Robin, Michael, Neuling, Alec and Christoph 👍
Really glad you like the outcome👍
20 December 2022, 23:01
Simon Nagorsnik
Great finish here!
I really like how you present all these objects together.
The overall impression looks very harmonious!
Good choice of colors.
The colour scheme inside is also excellent.
Great finish here!
I really like how you present all these objects together.
The overall impression looks very harmonious!
Good choice of colors.
The colour scheme inside is also excellent.
2 January 2023, 21:52
Andy Ball
What is truly stunning is the B&W shot, makes it look even more war-era.
What is truly stunning is the B&W shot, makes it look even more war-era.
2 January 2023, 22:04
Cuajete
I totally agree with Andy 👍
...And I keep wondering if that Bedford is the old Airfix tool 😉
Great job again, Daniel! 👌
I totally agree with Andy 👍
...And I keep wondering if that Bedford is the old Airfix tool 😉
Great job again, Daniel! 👌
3 January 2023, 19:21
Daniel Klink
Thank you very much Simon, Andy, Cuajete and David 👍
Really glad you like the outcome and the presentation.!
@Cuajete it is a AEC Matador and yes it is from the old Airfix refuelling set in 1/76
Thank you very much Simon, Andy, Cuajete and David 👍
Really glad you like the outcome and the presentation.!
@Cuajete it is a AEC Matador and yes it is from the old Airfix refuelling set in 1/76
4 January 2023, 21:29
David Taylor
Daniel,you could up the scale and do one in 48 and get the matching refueller from AA.
Daniel,you could up the scale and do one in 48 and get the matching refueller from AA.
4 January 2023, 21:45
Album info
This will be a real Etching orgy.. Trumpeter already packed over 100 parts in the interior detailing and edard added 3 full sheets in their etching part set..
Wow!!! And you will see nearly nothing in the end.