paper modeling database | zarządzanie magazynem
Roland
Roland Sachsenhofer (Roland)
AT

Beechcraft 200

Komentarzy

73 19 March 2022, 08:49
Roland Sachsenhofer
The construction of the Beechcraft started with a nice experience: I had been thinking about how to make the side windows, which are very tricky to fit exactly, and I came up with an idea that I have now used on all the windows: instead of using the kit parts, I filled the openings with "Crystalclear". After one night, the material dried up wonderfully clear and, in my opinion, looks better than the clear plastic parts. See for yourself: the rear window is a kit clear part, the front one, however, is made of dried Crystalclear.
19 March 2022, 08:54
Olivier
One can only agree with you. Well done !
19 March 2022, 09:04
Jv
Yes agree how did you make it
And how big can you do it
19 March 2022, 09:08
Cuajete
Nice effect, Roland 👍
Following!
19 March 2022, 19:01
Roland Sachsenhofer
Thank you for your words! To be honest, I am also glad that it seems to work- and that I have saved myself the trouble of gluing in the individual windows, as well as a result that I would not have been happy with!
19 March 2022, 19:37
Roland Sachsenhofer
The fuselage halves are closed, now it's time to putty, mask and assemble!
20 March 2022, 18:45
Roland Sachsenhofer
A "putty queen" is holding court - but it will be alright! 🙂
22 March 2022, 19:32
Roy McKay
Following. Need a B200 for my IAC collection. Have the Rareplanes Vacform kit but might get one of these instead. Interested to see how you get on masking the crystal clear.
22 March 2022, 22:17
Michael Kohl
A putty queen? I am in. 🙂
22 March 2022, 22:41
Juergen Klinglhuber
May I ask what kind of masking tape we see on pic 8 & 9 on the front shields?
23 March 2022, 05:57
Roland Sachsenhofer
Hello Jürgen! The masks on the front windows as well as on the cabin windows are from the kit. That is one of the pleasant qualities of Modelsvit: usable, high quality adhesive masks are mostly included.
23 March 2022, 09:48
Cuajete
Great challenge with the putty queen and good job so far.

Roland, how do Crystalclear windows behave with masks? Crystalclear is fragile with them? I mean, will it break when peeling off the mask? Thanks.
23 March 2022, 10:02
Roland Sachsenhofer
Thank you Cuajete!
A good question! based on what I have seen so far, I would say: once cured, the "Krystalklear" forms a so far hard, closed surface that can be well covered with the masking materila. I have looked once to see if the adhesive on the mask somehow interacts with KrystalKlear and changes it- but there is no indication of that so far.
I'm taking a light touch approach to this important question because if the end result is messy, I could simply cut out the messed up windows and replace them with a new layer of KrystalKlear.
23 March 2022, 10:26
Cuajete
Perfect, Roland. Thanks! 👍
23 March 2022, 11:01
Łukasz Gliński
Nice project Roland 👍
Basing on my experience I recommend covering the crystal clear using some varnish before masking. It's not as resistant as UV glue for example. I usually spray few very thin coats of GX100 varnish. On the other hand you could have filled them after painting which I often do.
PS. Wondering whether we're gonna see their B350 one day... 🙁
23 March 2022, 12:49
Dominik Weitzer
nice work. Now I'm interested about the painting process.
23 March 2022, 15:28
Roland Sachsenhofer
Good tip with the coating! Lukasz!Well, we'll see what the result is.
Filling the openings only after completion is also a very good idea, but I'm afraid of clouding the already firmly installed cockpit glazing. Thank you mates!
24 March 2022, 07:40
Łukasz Gliński
Yes, the late glazing requires sealing the cockpit within the fuselage, so it's too late I assume 🙂
24 March 2022, 10:33
Roland Sachsenhofer
Yes, I have become quite cautious after a few nasty surprises! 🙂
24 March 2022, 10:43
Cuajete
Good advices!
Roland, what did you use in the pic 1 as a counterweight to avoid the tail sitter?
24 March 2022, 18:19
Roland Sachsenhofer
The weight comes from the range of "Uschi van der Rosten" and is called "Three Green Liquid Nose Weight"; quite recommendable! It resembles a paste and can be placed in all kinds of nooks and crannies, so it is fine to use wherever there is little space but a high demand for weight.
25 March 2022, 05:22
Cuajete
Interesting, Roland. Thanks! 👍
So far the smallest thing I've seen for these situations is Deluxe's Liquid Gravity, but this seems to sound even better.
25 March 2022, 18:57
Gordon Sørensen
Watching! Great work as usual, Roland! I have quite a few hours in King Airs, would love a model of one I have flown…
26 March 2022, 01:36
Roland Sachsenhofer
Thank you Cuajete and Gordon!
Gordon, that is of course particularly fascinating! I ask you: is it as pleasant to fly as it looks? And, on a more serious note, I've noticed that the turbines seem to burn quite distinct exhaust traces on the fairing. Is this really an issue, or would you not show any exhaust traces at all?
26 March 2022, 20:09
Gordon Sørensen
I flew the King Air 200 throughout Eastern Quebec in Canada. I thought it was a good airplane - we operated it in winter months to -40 C and summer to +35 C.
The PT-6 engines leave exhaust soot! Lots of soot! Many operators paint the nacelles black to hide the evidence! Also, notice that the exhaust stacks on the left and right side of the nacelles point in different directions.
29 March 2022, 23:24
Mirko Römer
Looks to be quite a challenge but I'm convinced you'll master it!
30 March 2022, 19:51
Roland Sachsenhofer
Gordon and Mirko, thank you for your answers! This is really interesting, informative and inspiring, Gordon. I would like to come back to this when I finish the Beechcraft 200.
31 March 2022, 09:13
Roland Sachsenhofer
You see here the "King Air" with a first coat of paint, which will mainly take care of the black de-icer zones at the leading edges of the surfaces, but also allows to discover irregularities and inaccuracies - there is still a bit to do!
2 April 2022, 20:09
Roland Sachsenhofer
I taped off the centre line in "Neutral Grey", even though there would have been usable decals for it - but this seems almost easier and less risky to me.
4 April 2022, 06:18
Finn
Looking really good, will follow
4 April 2022, 11:02
Cuajete
I agree with Finn 👍
4 April 2022, 18:39
Roland Sachsenhofer
It's much appreciated, thank you both!
4 April 2022, 20:07
Roland Sachsenhofer
The "Blue Angels Blue" Gunze H 322 was applied to the undersides; in the rear I let the tail cone, which unfortunately seems to have been lost as a component, grow back using "Kristal Klear".
5 April 2022, 06:32
Roland Sachsenhofer
There is good news about the "King Air": the decals are already up, tomorrow I want to seal it with a glossy clear varnish and then iron out the various inaccuracies that occur during every build. But: an end is slowly in sight!
10 April 2022, 18:38
Mirko Römer
Looks great!!
10 April 2022, 18:48
Cuajete
Painting looks great! 👍
10 April 2022, 18:57
Roland Sachsenhofer
Thank you mates!
10 April 2022, 18:59
Michael Kohl
Looking very elegant in the livery you have chosen
11 April 2022, 09:11
Łukasz Gliński
Now it looks like my BA Twin Otter 😉
11 April 2022, 09:56
Roland Sachsenhofer
Thank you mates, that pleases me!
11 April 2022, 17:01
Spanjaard
looking good
11 April 2022, 18:44
Roland Sachsenhofer
Thank you Spanjaard!
13 April 2022, 05:56
Kyle DeHart
Looking great!!
13 April 2022, 06:34
Dietmar Bogatzki
Great paintjob, Roland 👍
13 April 2022, 06:35
Roland Sachsenhofer
Mates, I feel motivated!
13 April 2022, 07:41
Roland Sachsenhofer
I am pleased to announce the completion of the Beechcraft 200 in the attractive RAF colours! The kit is a very good starting point for building this beautiful aircraft, but I have made a number of additions. Especially the antennas, the two pitot tubes at the very front of the nose were added, as well as the wiring of the landing gear.
Overall, I am pleased that the experiment with "Kristal Klear" windows worked very well: they survived the weeks under the masking without any damage. Last but not least: I am also pleased that the machine stands firmly on all five flattened tyres - with the usual three this is quite feasible, with five one can be happy about a success!
For the "outdoor shots" I used photo backgrounds of an airport

Thank you for all your interest and valuable comments!
14 April 2022, 11:53
Spanjaard
it looks really well, missing certainly accomplished. hangar pictures look fantastic!
14 April 2022, 11:55
Roland Sachsenhofer
I'm glad to hear it! Thank you Spanjaard!
14 April 2022, 12:01
Kyle DeHart
Definitely a lovely color scheme that fits the airplane well. Looks great, nice job!!
14 April 2022, 12:03
Łukasz Gliński
This is so nice, grand finish 👍
14 April 2022, 13:23
David R. Meizoso
Great one, Roland! Those windows look terrific!
14 April 2022, 14:11
Finn
Truly inspiring, well done!
14 April 2022, 17:32
Cuajete
Wow... Great job and fantastic result, Roland. Congrats!
And also the plane integrates very well in the background pics 👍
Can you see anything inside through the "Kristal Klear" windows?
14 April 2022, 17:38
Michael Kohl
The hangar shots are brilliant, the livery just beautiful. What is not to like?
14 April 2022, 18:30
Roland Sachsenhofer
Thank you for your encouraging and of course very motivating comments! The comment of a friend, which he made some time ago in view of my model pictures, that now and then a scenic background instead of the constant "blue" would do the models good, has led me to the use of a few different backgrounds. I have to say that I also like this enrichment of the model photo series and I am glad that it is also well received by you!
Cuajete, I see nothing but blackness, but that's not because of the material, but because of the darkness of the interior. The transparency of KristallKlear windows is perfectly equivalent to that of transparent Plexi, possibly even better: it does not show any scratches at all!
Thank you all very much for your reactions!
14 April 2022, 18:49
Cuajete
Great, Roland! Thx for your information 🙂 👍
14 April 2022, 18:55
Ronan
A lot of work, very nice paintjob, great result Roland 👍
14 April 2022, 19:08
Roland Sachsenhofer
That makes me proud, rhank you both!
14 April 2022, 19:10
Neuling
I agree with Ronan. I also like the presentation of the aircraft. Not to forget the interesting "window making" .....
15 April 2022, 08:01
Roland Sachsenhofer
Commendation from you makes me very happy, thank you!
15 April 2022, 17:29
Juergen Klinglhuber
You did another great model Roland ! congrats.
16 April 2022, 08:30
Roland Sachsenhofer
Thank you Jürgen, I am very pleased!
16 April 2022, 16:20
Curatorm
Very beautifull, well done!
16 April 2022, 16:47
Roland Sachsenhofer
Thank you very much!
17 April 2022, 07:36
Alexander Clayson
Stunning, just stunning
4 September 2023, 15:09
Roland Sachsenhofer
I'm really pleased that you like this model - very motivating, thank you!
4 September 2023, 16:54
bughunter
When I saw the last pic I thought is was you reference photo 👍
Your models have been great for a long time, but now your photography skills have also improved a lot.
4 September 2023, 17:00
Roland Sachsenhofer
What a compliment! Thank you for your quite motivating feedback!
5 September 2023, 07:16
Marcel Klemmer
Bughunter, I had exactly the same thought 😉. Compliments on the great build, what a great result Roland 👍👍👍
9 September 2023, 19:00
Roland Sachsenhofer
Thank you very much for your comment
10 September 2023, 09:50
Ethan Williams
That looks fantastic, though the amount of filler it needed looks a little daunting! The Revell A380 was bad enough. Was the general fit okay on this kit? I'm always a little wary of kits from manufacturers such as A&A, Amodel, KP etc

Always liked the KingAir series and would love one for my collection, especially in that smart RAF paint, although, the Swedish example would go nicely with my Vampire T11 and Spitfire PR19...
15 September 2023, 13:03
Roland Sachsenhofer
Thank you for your words Ethan! The pictures of the building process are not meant to discourage, I recommend the kit without reservation. My summary of this build is the insight to take enough time with the cleaning up, but above all with the planning of the construction steps. Kits like this simply score points with the choice of model and a welcome equipment such as etched parts or, as I find particularly pleasant: masking.
15 September 2023, 16:11
Christian Bruer
Hi Roland, I just ordered the kit and came to your excellent WIP and finish when looking out for some additional information. I stepped through your WIP and the idea replacing the windows with Crystal Clear attracts my attention. I also noticed one question about masking the windows, but unfortunately I did not find any final result. Taking a look to the WIP photos it seems to me the windows are not masked although.
Well, it would be fine to share your experience with me 🙂

Happy Modelling and keep on the good work

Christian
19 September 2023, 17:55
Roland Sachsenhofer
Christian, thank you for your words - this from the master is pure motivation!
I looked at the construction photos again to remind myself: the kit comes with good usable masks with which I also masked off the hardened Crystal Clear. However, they are of a light grey colour and of a texture that makes them hardly recognisable visually. Knowing this, you can look at the construction pictures again and you will certainly notice them. In my memory the building process was quite pleasant and quite problem-free - I wish you much joy in the realisation of the King Air and look forward to your certainly again brilliant realisation!
20 September 2023, 08:44
Dominik Weitzer
wow. outstanding built. like it a lot
20 September 2023, 10:35
Christian Bruer
Hi Roland, thank you very much for your kind and fast reply. I will have a look on it again and thx for the hint and good wishes 🙂
20 September 2023, 18:23
Roland Sachsenhofer
Thank you both Dominik and Christian! I'm looking forward to it, Christian! 🙂
21 September 2023, 17:10
Guy Rump
I must have missed this one, outstanding! 👍
21 September 2023, 19:28
Roland Sachsenhofer
I'm pleased, Guy
22 September 2023, 04:50
Rui S
Well... it "just" looks real 👍
23 September 2023, 10:52
Roland Sachsenhofer
Thank you Rui, very appreciated!
24 September 2023, 06:27
MS K
Super clean finish and realistic. wonderful.
24 September 2023, 10:15
Roland Sachsenhofer
Thank you very much!
25 September 2023, 04:41

Project info

32 zdjęć/zdjęcia
1:72
Gotowe
1:72 Beechcraft 200 Super King Air (A&A Models 7224)

Wszystkie albumy

Wyświetl wszystkie albumy »