Sino-Japanese War A6M2a | Hasegawa
Komentarzy
21 1 November 2021, 22:48
Rui
Wow that crack must be so disheartening. Call it battle damage and have some oil stains around it or something. 🙂
Wow that crack must be so disheartening. Call it battle damage and have some oil stains around it or something. 🙂
9 December 2021, 06:54
Robin (WhiteGlint)
That's a setback. But it looks like you can fix it with putty and a lot of sanding.
That's a setback. But it looks like you can fix it with putty and a lot of sanding.
9 December 2021, 08:54
Neil
I agree. All these old kits I build are crap (usually!) in fit. I think it would be such a shame not to finish this. Your efforts so far look outstanding. It's shaping up to be a very fine build indeed! 🙂 Keep going! 👍
I agree. All these old kits I build are crap (usually!) in fit. I think it would be such a shame not to finish this. Your efforts so far look outstanding. It's shaping up to be a very fine build indeed! 🙂 Keep going! 👍
9 December 2021, 09:10
Speglord
Thank you all. I'm still weighing the pros and cons of masking everything off, going in with putty, and doing my best; or, on the other hand, just marching on. I'll make a decision within the next few days, hopefully.
Thank you all. I'm still weighing the pros and cons of masking everything off, going in with putty, and doing my best; or, on the other hand, just marching on. I'll make a decision within the next few days, hopefully.
9 December 2021, 18:47
Gary Victory
Justin, shame about the cowling damage. Would it be better to remove it and see if anything is causing a fit issue? Also the repair would potentially be easier with gluing the cowling back together and have a smaller clean up job rather than lots of filler. Im sure either way you will find a way to make good the repair.
Keep up the good work. 👍
Justin, shame about the cowling damage. Would it be better to remove it and see if anything is causing a fit issue? Also the repair would potentially be easier with gluing the cowling back together and have a smaller clean up job rather than lots of filler. Im sure either way you will find a way to make good the repair.
Keep up the good work. 👍
10 December 2021, 07:40
Speglord
Thanks for the encouraging comments Gary (and everyone else)! Unfortunately I only discovered it was cracked *after* it was glued on. A very unfortunate mistake. I think I've come to the decision to simply let it go; I'm still a new modeler and it can be something of an interesting little story to tell. I'm also simply just not confident enough in some of my puttying/re-scribing abilities to do this without making a serious mistake this late in the build. Luckily enough, the crack also isn't really that noticeable in person. I'll see about maybe covering it up somehow with some oils or pigments during the weathering part of the build. In any event, I have begun varnishing and will look to start the decal process sometime today or tomorrow.
Thanks for the encouraging comments Gary (and everyone else)! Unfortunately I only discovered it was cracked *after* it was glued on. A very unfortunate mistake. I think I've come to the decision to simply let it go; I'm still a new modeler and it can be something of an interesting little story to tell. I'm also simply just not confident enough in some of my puttying/re-scribing abilities to do this without making a serious mistake this late in the build. Luckily enough, the crack also isn't really that noticeable in person. I'll see about maybe covering it up somehow with some oils or pigments during the weathering part of the build. In any event, I have begun varnishing and will look to start the decal process sometime today or tomorrow.
10 December 2021, 19:43
Gary Victory
No worries Justin 👍.
One potential simple solution is to cut some thin plastic card (if you have it..? if not it is worth investing in some which can be found on amazon/e-bay or your local hobby shop) into the shape and glue it on. It will cut done on the amount of filler required and sanding.
Has modellers we all have our cock-ups....and we are always learning.😉
No worries Justin 👍.
One potential simple solution is to cut some thin plastic card (if you have it..? if not it is worth investing in some which can be found on amazon/e-bay or your local hobby shop) into the shape and glue it on. It will cut done on the amount of filler required and sanding.
Has modellers we all have our cock-ups....and we are always learning.😉
13 December 2021, 07:40
Jim J
Nice work! Sorry about the crack in the cowling at this stage of the game. Every build is a learning experience for me.
Nice work! Sorry about the crack in the cowling at this stage of the game. Every build is a learning experience for me.
17 December 2021, 22:18
AndreasK
I would suggest to do some chipping effects around the crack and claim this is due to some hard action in battle. 🙂
Otherwise, the model looks great!
I would suggest to do some chipping effects around the crack and claim this is due to some hard action in battle. 🙂
Otherwise, the model looks great!
18 December 2021, 14:00
Album info
Should be a fun build. I intend to use some marbling techniques for the first time.