Harvester SK-5 Niva

1
May 18, 2022
From the moment Scalemates announced this new model, I wanted to have it. According to my knowledge for a harvester in scale 1:72 this is the only game in town.
With so many other projects still in the making, this will not see any progress soon, but I want you to have an impression of the kit, so I share some pics with you.
2
May 18, 2022
It is a resin and multimedia kit and not cheap (about 90 €). When checking for completeness, a few minor parts were missing. Nothing that cannot be scratched, but still a bit annoying. Have to check with the vendor of how to proceed with this.
3
May 18, 2022
Instructions are fairly clear so far, but not 100 % precise. For example: the main wheels appear as a single piece, while you have to assemble it from three parts.
4
May 18, 2022
First test fits of various pieces promises good fit and no necessity for a lot of guess work of where to put what.
5
May 18, 2022
6
May 18, 2022
I suppose that placing all the similar but still different wheels of the transmission correctly will be a bit of a challenge, as they are not specifically labeled on the casting block (which would have been nice and helpful).
7
May 18, 2022
8
May 18, 2022
9
May 18, 2022
Casting is precise and I have not found a bubble yet - only some rather minor imperfections.
10
May 18, 2022
some warp here, but that is about it.
11
May 18, 2022
nicely detailled engine...
12
May 18, 2022
...and small parts.
13
May 18, 2022
Casting blocks are small and quite easy to remove.
14
May 18, 2022
Here the assortment of the different transmission wheels
15
May 18, 2022
16
May 18, 2022
17
May 18, 2022
The photo etch fret. Most of it goes to the reel, cabin and transmission.
18
May 18, 2022
The clear parts appear not so clear, so I will most likely replace them with clearer sheet.
This should be fun to build.
19
June 1, 2022
I felt like soldering, so I started with the reel. The flimsy parts and small connecting areas proved to be a challenge.
20
June 1, 2022
After a couple of failed attempts I managed. Sanding, fluxing, tinning, alinging, soldering were the steps that finally led to success.
21
June 1, 2022
Before cleaning excess solder...
22
June 1, 2022
...and the final result I am quite happy with.
23
June 5, 2022
Main body assembled
24
June 5, 2022
25
June 5, 2022
Nicely detailed engine.
26
June 5, 2022
27
June 13, 2022
some more work on the reel. I managed to straighten the warped areas with boiling water considerably. To improve looks I want to sharpen the edges of the spiral as on the real thing the spiral is only sheet metal. On the left side (right side on the pic 😉 ) I am close to the desired effect. The other side still has to be done.
28
June 13, 2022
slowly taking shape
29
June 13, 2022
The outer gear of the reel posed a problem, as - contrary to the instructions - the outer chain parts were available in one size only, while one (left) of the drives is shorter than the other.
30
June 13, 2022
I did what I´d do at my bike: take out two links. Now it fits.
31
June 13, 2022
Assembly and mounting of the outer reel gear was quite flimsy. Using some brass here and there and replacing some resin axles with brass ones resulted in an improved stability.
32
June 13, 2022
everything just dryfitted as I want to paint it in segments.
33
June 13, 2022
resin and brass. I like 🙂
34
June 15, 2022
Instructions were confusing, misleading, and partly downright wrong. Instructions call you to use the parts PE2 but the fret has two different ones designated PE2. Their position is not all to clear too. I put the ones with the long bracket to the spare box and used the short ones only.
35
June 15, 2022
Some pins provided additional stability and a test for operational soundness of my interpretation of the instructions.
36
June 15, 2022
Looks ok to me.
37
June 15, 2022
38
June 18, 2022
Soldering day. I finally managed to finish the ladder.
39
June 18, 2022
I build new handrails as I do not like the flat PE ones
40
June 18, 2022
Those are the parts for the cabin. I replaced the clear parts provided with the kit as they turned out to be a bit on the thicker side (even after I removed the protective foil 😉 ).
41
June 18, 2022
Soldering the metal parts of the cabin. After solid preperation that was easier that apprehended.
42
June 18, 2022
Fortunately each edge had a true angle which made alignment easier.
43
June 18, 2022
Here dry fit with the resin part. Now I can fit the roof und color the interior of the cabin.
44
June 23, 2022
small step. Ladder is done
45
June 23, 2022
Grain conveyer. The solid parts hollowed out and everything ready for paint.
46
June 28, 2022
First batch of parts ready for paint
47
July 10, 2022
First parts are done
48
July 10, 2022
49
July 10, 2022
The harvester needs something to harvest, doesn't he? Building some crop.
50
July 10, 2022
A rough idea of where I am heading at.
51
October 16, 2022
First steps on the inside of the cabin.
52
October 16, 2022
Finally ready for paint.
53
October 16, 2022
The reel with the spiral required quite some effort. When scraping the edge became irregular and had to be built up again with Tamiya putty which in turn needed sanding and trimming again.
54
October 16, 2022
The thin pins on the reel are made from 0,4mm brass tube, all axles are 0,9mm in diameter.
55
November 9, 2022
Slow progress. Interior completed. Some more detail painting and weathering necessary.
56
November 9, 2022
Finally fed up with my futile attempts to achieve a flat surface here (it bulged out all the time), I changed strategy and build the wall anew with styrene sheet.
57
November 9, 2022
Looks ok and the reel is finally attached and aligned.
58
November 9, 2022
Now test fit of all the transmission pieces. The easy side.
59
November 9, 2022
The tricky side finally done. Instructions lack a lot of information. PEs are many but often no info is given of where to put them. I made my choices and am quite happy with the result. Axles are 0.4 and 0.8 mm in diameter. In case you want to build this kit and you are keen about more details of where I put what, just post me a pm.
60
November 14, 2022
Primer on, but some blemishes had to be addressed
61
November 14, 2022
Dark rust color as base color
62
November 14, 2022
After a lot of tweaking and puttying and sanding...
63
November 14, 2022
...the drivers cabin is finally ready for paint too.
64
November 14, 2022
Two more rust tones and everything sealed with varnish.
65
November 29, 2022
The color mix I will go for.
66
November 29, 2022
And the first result after chipping with hairspray on the lower side of the cabin (upper part will be white).
67
November 29, 2022
I gave the color a bit more of a reddish hue by adding flat red (Mr. Hobby Color H13). Getting the chipping done on those semigloss colors takes some elbow grease and you gotta be careful not to miss the sweet spot and to chip down to the plastic. So far I am happy.
68
November 29, 2022
Some panels were lighted with H313 to give a bit of color variation
69
November 29, 2022
70
November 29, 2022
With the main body and all the tiny bits painted and chipped,...
71
November 29, 2022
...a big step has been done.
72
November 29, 2022
Bottomline I am quite happy with the result
73
November 29, 2022
Next step will be oils
74
November 29, 2022
75
November 30, 2022
Quite a few of those machines had spare parts in other colors than the main vehicle. So to achieve some visual interest, I decided to paint the engine in green
76
November 30, 2022
The tappets of the grain converyer were added
77
November 30, 2022
The fuel tank received some details.
78
November 30, 2022
79
November 30, 2022
Some cables and rods to bring life into the engine
80
November 30, 2022
81
December 2, 2022
Two inner struts I discovered in pics from the net were constructed and glued into the reel.
82
December 2, 2022
After some detail painting I started with oils. Here it is the wheels only.
83
December 2, 2022
The side walls progressed nicely. I am getting closer to the desired look.
84
December 2, 2022
Smaller parts done already
85
December 2, 2022
Well worn look of the driver compartment.
86
December 3, 2022
Painting is done. Tackling now the transmission.
87
December 3, 2022
Main parts are assembled.
88
December 3, 2022
Only the engine as major component has to be installed.
89
December 3, 2022
The main belts are soft tubes with a diameter of 0.4 mm.
90
December 3, 2022
91
December 3, 2022
92
December 3, 2022
93
December 3, 2022
94
December 3, 2022
95
December 3, 2022
96
December 9, 2022
Basic painting is done. The skin needs some more attention and I have to work a bit more on highlights and shadows. But for the first time I more or less managed to apply a glazing technique, keeping the preshading visible.
97
December 14, 2022
Puh. Installing the engine with some tubes/rods and pipes was tricky. Painting everything will be another challenge.
But now it is only the electric distributor with cables and a few bits and pieces to go.
98
December 14, 2022
For some visual interest I decided to color the "replaced" engine green with an aluminum gearbox.
99
December 14, 2022
Electric distributor with lines added and all hoses and cables painted.
Hard to handle that beast.
100
December 14, 2022
The last bits to be added.
101
December 16, 2022
Done. All missing bits and pieces were added (save the grain conveyer as I realized afterwards ?)
102
December 16, 2022
A few touches with oils at two or three spots will be the last steps.
103
December 16, 2022
Some parts I did not install intentionally, like the rear view mirrors or the cabin door. The former because non of the reference pics showed it with any of them, the latter as it would block the view into the cabin which I wanted to keep free.
104
December 22, 2022
Finally finished.
105
December 22, 2022
A few strokes with a brush, some flat varnish on glossy hoses and lines, a wash here and there to tone down parts too shiny, some oils and a detail here and there were the last works.
106
December 22, 2022
107
December 22, 2022
108
December 22, 2022
109
December 22, 2022
110
December 22, 2022
111
December 22, 2022
112
December 22, 2022
113
February 10, 2023
Finally some progress on this base too.
114
February 10, 2023
115
February 14, 2023
116
March 4, 2023
Let's continue with the base. Masking the area where the uncut crop will stand.
117
March 4, 2023
I had only 2 and 6 mm fibers. 3 would have been perfect. So I opted for the longer ones and will trim them later.
118
March 4, 2023
Where the harvester would have driven I flattened the fibers.
Next step: to place the hay the harvester discards when the glue is dry.
119
March 5, 2023
I added a bit of short green fibers, as no wheat field is free of some green stuff.
120
March 5, 2023
I planted all of my wheat I produced so far. But if I continue like this this build will never end. So I will have to change my technique here. Got an idea or two. Let´s see...
121
March 20, 2023
Tried a couple of approaches to plant my wheat, but nothing really convinced me. Let's try this. I fenced in the area where the uncut wheat stands, put white glue and packed long fibers into the fence, thus forcing them upright.
122
March 20, 2023
Anxious to see how this will work out. I hope that only about half of the fibers stick, as they are too packed this way. I will use my shaver to cut them to the desired length when the glue is dry. Cross your fingers. 🙂
123
March 22, 2023
Removed the fence. Unfortunately with some of the paint of the base too. Will have to fix that.
That's the way it looks after vigorous rubbing, combing and brushing. As hoped the fibers are much less dense now, but still stand nice and upright. The heap of fibers I combed out is quite impressive. Just looking at it you wouldn't expect one left standing, would you?
124
March 22, 2023
The glue Vampifloc provided as a sample when I bought their fibers - and which I used for this base - has some nice features. First, it doesn't form a skin so that handling is much more comfortable than with regular white glue. Second, you can just rub of excess glue from flat surfaces after it is dry. And the fibers stick quite good to it too.
125
March 22, 2023
126
March 22, 2023
Next step: trimming the length. I used my electric shaver for that purpose. After I achieved a uniform military style top surface, I cut it irregularly to make it look more natural.
Puuuh, fibers all over the place.
127
March 22, 2023
Now, let's turn the fibers into crop by planting the spikes. For this I use some plant parts I came across somewhere.
128
March 22, 2023
I haven't figured out another way than to put those individually. Still a tedious job but still much faster, than to make each plant individually.
129
March 22, 2023
Getting there. I am starting to like the appearance of my little wheat field.
130
March 22, 2023
First segment done.
131
March 25, 2023
Puh. Finished. But I like how it turned out.
132
March 25, 2023
Only the harvested part looks not right yet. Compared with pictures of harvested fields it is much too green and the vegetation is too dense.
133
March 25, 2023
134
March 25, 2023
So I rubbed of a good deal of the gras and stubs. The last ones not being prominent enough anyway. That is closer to the real thing.
135
March 25, 2023
To get more prominent stubs I planted the rest of the field with fibers too. When the glue is dry it will be time again for my shaver.
136
March 27, 2023
Well, the first attempt didn't work out. The fibers were too packed and attached with too much glue. It just didn't look right. So here is the second try. Much less packed.
137
March 27, 2023
And the result after shaving almost everything off again. Getting there. 🙂
138
March 27, 2023
Now I have to pack the heaps of the cut stems the harvester spits out, then to finish the figure and lastly add a few details and perform minor repairs.
I should be able to complete this for Moson.
139
March 28, 2023
For the cut hay I used fibers cut to length and packed them with several layers of hairspray as glue.
140
March 28, 2023
The final step was a layer of hairspray onto which I sieved very fine scatter from the fiber-material to blend everything together.
141
March 28, 2023
I am still considering to give the hay and the wheat stems a more brownish hue. Haven't decided that yet.
142
March 28, 2023
143
March 28, 2023
144
March 28, 2023
145
March 28, 2023
146
March 28, 2023
147
March 28, 2023
148
March 28, 2023
149
March 28, 2023
150
March 28, 2023
151
April 16, 2023
The little maintenance scene is set. I changed the color of the box from orange to light blue. Like it better that way. The tools are a mix of photoetched parts from Hauler and printed ones from EMP3D.
The peeled off paint at the base was repaired, a little scatter put at various places to make the heaps of cut stems look more natural. Then a satin varnish was applied to reduce the artificial sheen. So the base is ready now. The harvester was attached to the board and secured via pins in the main wheels. Next - and last - step is to finish the paint job on the figure.
152
April 17, 2023
Calling him done.
153
April 17, 2023
Absolutely beautiful figure from Reedoak.
154
April 17, 2023
155
April 17, 2023
156
April 17, 2023
157
April 17, 2023
158
April 17, 2023
159
April 17, 2023
160
April 20, 2023
161
April 20, 2023
162
April 20, 2023
163
April 20, 2023
164
April 20, 2023
165
April 20, 2023
166
April 20, 2023
167
April 20, 2023
168
April 20, 2023
169
April 20, 2023
170
April 20, 2023
171
April 20, 2023
172
April 20, 2023
173
April 20, 2023

Kommentarer

201 18 May 2022, 17:52

bughunter
Something completely different after all the 109 and Tiger 👍

1 June 2022, 07:17

Robin (WhiteGlint)
Following 👀

1 June 2022, 07:47

Tom B.
That is an interesting subject you´ve got there! I´m taking a seat 👍

1 June 2022, 11:22

Łukasz Gliński
Oh man, what an awesome kit! And the topic too. Following 👍

1 June 2022, 12:09

Dash Rendar
Great work so far. Lovely PE parts!

1 June 2022, 22:15

Michael Kohl
Hey guys! You are more than welcome. Thanks for your likes too. Much appreciated.

3 June 2022, 20:01

Bruce Huxtable
My goodness, does it come with a Haynes Manual? 😉 Looks like a lots of challenges to overcome, but I'm sure the end results will be fantastic!

3 June 2022, 21:01

Simon Nagorsnik
Cool project!
Hope to see some good redults😉

3 June 2022, 21:26

Ben M
The PE reel came out fantastic. I like the subject, looks like a fun build.

3 June 2022, 21:57

Lochsa River
Have fun harvesting!

4 June 2022, 00:55

Michael Kohl
@Bruce: unfortunately it doesn't. There are some areas where location of parts is not clear. So, if you happen to have a Haynes Manual for this russian harvester, please let me know. 😉

5 June 2022, 16:35

Michael Kohl
@Ben M: I am happy with the reel too, so I thought I had a run and tried my soldering skills at the access ladder - and failed miserably. Everything that worked so smooth at the reel, would just not work at the ladder (for now 🙂).

5 June 2022, 16:40

Finn
Cool, looking forward

13 June 2022, 07:50

Alec K
Cool project, something different it sure is. Question: in pic 19, is that a magnetic base?

13 June 2022, 12:44

Spanjaard
really curious about this one.

13 June 2022, 12:56

Michael Kohl
Hi Finn, Alec and Spajaard, nice to have you around.
@Alec: it is not a magnetic base but a ceramic one. It is meant for soldering as it can take any kind of heat.

13 June 2022, 18:26

Michael Kohl
Thanks for your likes, folks. I am happily surprised about the attention this niche project receives. Stay tuned.

15 June 2022, 10:38

Robin (WhiteGlint)
As much as we love the "normal stuff", I think many people are excited to see something unusual off the trodden path.
Keep up the good work, Michael. 👍
Your PE handling is top, are you soldering the parts?

15 June 2022, 11:19

Jörg Schäfer
Hallo Michael.
Sehe das wie Robin, sehr schön mal was anderes zu sehen als immer nur Panzer und Flugzeuge.
Sehr akkurate Verarbeitung der Ätzteile.
Ich werde das hier weiter verfolgen.

18 June 2022, 14:24

Alex
Interesting kit. Will it tow a russian tank, by any chance? 😄

18 June 2022, 16:18

Michael Kohl
Thanx mates for your encouragement and welcome
@Robin: not least to further improve my skills, I wanted to solder particularly the bigger pieces. Soldered they are much more stable and can take some handling. But with some pieces I prefered super glue.
@Jörg: Danke dir, freut mich, wenn Du vorbeischaust
@Alex: the plan is to show it in its natural habitat - meaning harvesting, maybe together with a russian or czech truck. The original idea was to display it with a Cmelak and to build a second one (Cmelak) after I made my life miserable with the first one. But now I feel that the plane will take to much attention from the harvester.

18 June 2022, 17:42

Simon Nagorsnik
So much work to do, my respect for your progress mate 😁
Great job with the PE`s!

22 June 2022, 18:30

Bruce Huxtable
A proper engineering project for sure 👍 I'm impressed with your soldering skills, it's kinda like you have completed an apprenticeship!

22 June 2022, 19:14

Michael Kohl
@Bruce: Well actually I did - but that was 31 years ago. 😉 And it was only basic training in high temperature soldering with a flame. So for soldering brass I had to start from scratch. But with practice success is achieved more often. 🙂

28 June 2022, 20:03

Jörg Schäfer
Krass, der Michael pflanzt Weizen.
Immer wieder geil dir bei deinen Baufortschritten zu zu sehen.

10 July 2022, 11:50

Spanjaard
Going well. Nice grain to be harvested

18 July 2022, 21:56

bughunter
Oh yes, looks nice! But it could also be hemp. 😉

19 July 2022, 05:41

Michael Kohl
Danke dir Jörg. Ein Kompliment das ich nur zurückgeben kann. 🙂

Thanx Spanjaard, nice to have you around.

Bughunter, you are absolutely right, as the "grain" I put on for layout purposes is hemp - plumpers hemp - indeed. 🙂 I experimented with it to do the grain, but the fibers are too uneven.

19 July 2022, 15:28

Mark Broughton
Great build, its very similar to the combine my Dad used in the 70's. My son is harvesting in Claas combine this year thats like a space ship in comparison.

20 July 2022, 08:38

Laliscale
Oh my god. In my childhood we played on this monster in a machine graveyard. It was not so safety from now but exciting... Michael this is a very cool kit i'll follow your project.

20 July 2022, 18:18

Bernhard Schrock
Sehr erfrischend etwas zu sehen, was total aus dem Rahmen fällt! 🙂 die Lötstellen sehen sehr sauber aus. Womit hast du gelötet?

20 July 2022, 19:31

Michael Kohl
Thanx Mark and Laliscale. Nice thought that this brings on some childhood memories. Concerning safety: when I watch the YouTube-Videos of this machine and look at all the moving parts of the various transmissions, I ask myself how many fingers have been sacrificed to the god of Niva.

30 July 2022, 18:24

Michael Kohl
Danke Bernd. Ich nehme nen einfachen Lötkolben, verzinne die Spitze und verzinne damit die zu lötenden Kanten nachdem ich diese mit feinem Schleifpapier und Alkohol gereinigt habe. Alles wird nur mit Handschuhen angefasst und ich nutze viel Flussmittel. An Lot nehme ich normales Elektrolot.

30 July 2022, 18:28

Dean Harpster
Great subject! I'm looking forward to seeing the finished product.

31 July 2022, 16:59

Zsolt Czegle
Awesome subject! I've also in my stash! Following with intrest!!

15 October 2022, 06:57

Michael Kohl
Welcome Dean and Zsolt!
Haha Zsolt, I would like to peek into your stash. I suppose there are some goodies to be found there. 🙂
And thanks alot for all the likes for my projects. Much appreciated.

15 October 2022, 12:22

Dariusz Swiderski
I must say, this is a dope build 🙂

27 October 2022, 21:53

Michael Kohl
Thanks Dariusz. With two bigger hurdles cleared I think it will progress more smoothly for a while. Stay tuned.

9 November 2022, 07:18

bughunter
Good to hear that! Well done so far 👍

9 November 2022, 07:28

Lochsa River
this is a great project...

9 November 2022, 08:17

Dominik Weitzer
1:72...unbelivable...

9 November 2022, 10:50

Alec K
Great progress Michael. Amazing how complex this kit is.

9 November 2022, 14:38

Villiers de Vos
Lots of details. A very unusual subject.

15 November 2022, 04:11

Michael Kohl
Thanks mates for your motivating comments. Nice to see your interest in this niche build.
@Alex. The kit is a bit complex indeed. With that in mind one can only congratulate Snake Model for their very good engineering. Unfortunately instructions are not on the same level. So some experimenting, creativity and research on behalf of the modeller is needed.

15 November 2022, 09:32

miloss
Ohohooo, that´s FANTASTIC!!! Great, great, great! Where do you buy Snake model´s kit, please? They have so many so cool objects, in their offer!

26 November 2022, 12:12

Christian Lehmann
👍

26 November 2022, 13:33

Michael Kohl
Thanx mates for your interest. Miloss, I saw this kit in the newsfeed here on scalemates and was looking around. I found mine at panzerfux.de. They still offer a few kits, right now the Harvester for 72€ as a black friday offer.

27 November 2022, 00:03

miloss
Thank you very much, Michael.

27 November 2022, 17:20

Villiers de Vos
Nice work on the main colour.

29 November 2022, 16:58

Tom B.
Coming along nicely 👍 Nearly made me buy one myself! But I settled for the tracked carrier thingy (TDT-55)...

29 November 2022, 18:43

bughunter
Great progress 👍
pic 67: you can not chip into plastic, because there is only resin 😉

29 November 2022, 19:14

Michael Kohl
Iss alles Plaste, ne wor?! 😉

29 November 2022, 19:44

Michael Kohl
Thanks folks for your nice feedback and the likes. Much appreciated. Tom, good luck on your tracked carrier. Keep us posted.

1 December 2022, 12:07

Alec K
This looks absolutely super Michael. That chipped red turned out great 👍

1 December 2022, 19:37

Michael Kohl
Thank you, Alec. I have to admit, that I am quite happy with how it turned out so far.

3 December 2022, 23:22

Villiers de Vos
Very nice work. The weathering is spot-on.

4 December 2022, 05:08

Marius
Very impressive!

4 December 2022, 12:26

bughunter
What a (somehow ugly) beast!

4 December 2022, 12:33

István Szücs
Excellent work! And in 1:72 scale... Incredible!

4 December 2022, 12:45

Michael Kohl
Thanx guys for your motivating comments and all the likes.

5 December 2022, 11:21

Neuling
István nimmt mir hier das Wort aus dem Mund. 👍

5 December 2022, 11:47

coporado
Outstanding model, superb weathering, great job!

9 December 2022, 05:56

Bruce Huxtable
Superb work, congratulations 👍🙂

9 December 2022, 22:50

Juergen Klinglhuber
WOW 👍

9 December 2022, 23:08

Pierre Pierre
👀

10 December 2022, 03:55

Michael Kohl
Thanx mates for your encouraging feedback and all the likes for this non-mainstream subject. Looks like the finish line is not too far away anymore.

14 December 2022, 09:59

Robin (WhiteGlint)
The harvester looks great, I love the weathering and chipping.

14 December 2022, 11:37

Dominik Weitzer
outstanding! it is better and better.

14 December 2022, 15:26

John
1:72 is not my scale but that's really impressive. I would have sworn it was 1:35.

15 December 2022, 01:44

Ray
Very very nice

15 December 2022, 02:57

Finn
This build is only getting better

15 December 2022, 07:35

Michael Kohl
Thank you guys. Your comments make happy.

15 December 2022, 10:51

Robert Podkoński
That's just amazing, Michael! I am impressed with your work (and perseverance)!

15 December 2022, 14:53

Laliscale
Very nice work! I love the colors. Masterpiece!

15 December 2022, 15:47

Jörg Schäfer
Grandios. 👌

16 December 2022, 16:36

Łukasz Gliński
Outstanding build 👍

16 December 2022, 19:39

Michael Kohl
Guys, you make me blush. Thanks for your comments.

18 December 2022, 15:27

Marius
I wanted to wait till the end, but I stopped by again to say your agricultural thingy is one of the best models in 1:72 I have seen here lately.
Will there be a diorama with it?

18 December 2022, 15:59

Michael Kohl
Marius, I am quite moved by your statement. And - yes - a dio is in the making.

20 December 2022, 10:12

Alex K
THAT is a jaw-dropping work... Respects!

22 December 2022, 02:12

Simon Nagorsnik
You have done a really outstanding piece of work here!!
Congratulations on this complicated project.
Good work with the pe- parts.
It was s plessure to follow your progress
Oh man, The painting looks really fantastic and deserves respect for that👏
The whole weathering is just outsanding!

But haven't I seen a base somewhere😉

22 December 2022, 05:13

Łukasz Gliński
Oh mate, simply exquisite 😮 👍
Extremely hard to believe this is 1/72

22 December 2022, 09:03

bughunter
Very nice near-final pictures, but it will look even better on the pic 50 base 👍
Very impressive PE and paint work!

22 December 2022, 09:14

Michael Kohl
Thanks so much. I am really flabbergasted by your comments.
@ bughunter: the base is in the making

26 December 2022, 20:23

Kyle DeHart
Very cool! Very excellent, believable weathering

26 December 2022, 21:02

Tom B.
Nice, the beast is finished to a superb degree 👍

27 December 2022, 10:29

Danie Malan
It look's very real, it just needs a field!

27 December 2022, 22:54

Lochsa River
fabtastic....

28 December 2022, 05:40

Bernhard Schrock
Top result! I hope to see this masterpiece live. Lingen 2023?

28 December 2022, 06:18

Michael Kohl
Thank you guys for sneeking in and commenting so positively.
Bernhard, I am afraid that Lingen will not be the place to see it as I live in Nürnberg and Lingen is quite a ride from there. In former times - while still living further north - Lingen was compulsory of course. But - maybe I can motivate some other guys from around here...

Daniemalan, a field is in the making.

29 December 2022, 17:23

Michael Kohl
Thanks folks for your many likes.

30 December 2022, 19:04

Albert Moore
I love this. It's different, and it's built and painted extremely well.

31 December 2022, 02:08

Michael Kohl
Thanks a lot Albert for your nice comment.

6 January 2023, 21:11

Neuling
Rudi Ratlos vor dem Mähdrescher ......... looks like a 1/35 build, very well done .............

11 February 2023, 11:23

Michael Kohl

Danke Neuling. 😀 Rudi Ratlos bekommt noch ein bisschen Werkzeug damit er die Kiste wieder richten kann. Űbrigens ne tolle Figur von Reedoak.

14 February 2023, 08:51

Jakub Fiala
Interesting subject, excellent work! Congrats! 👍

14 February 2023, 12:05

Neuling
🙂

15 February 2023, 10:11

Michael Kohl
Thanks Jakub and all who liked that one. It really makes me happy to receive such a nice feedback for this unusual subject.

16 February 2023, 18:34

Ralf Topeters
When it fits the subject every good response is more then well earned! Absolutely great build! 👍

16 February 2023, 18:51

Michael Kohl
Thanks Ralf for your nice feedback.

4 March 2023, 15:40

Alec K
This is so well done Michael. Really hard to tell it's 1/72 👍

5 March 2023, 00:29

Michael Kohl
Thanks Alec for your kind words.

7 March 2023, 14:13

Michael Kohl
Thank you Alexey and all the others for your likes.

20 March 2023, 14:01

bughunter
The upright fibers looks promising! Good luck!!!

20 March 2023, 18:11

James C
Very impressive work 👍

22 March 2023, 16:58

Michael Kohl
Thanks Frank (bughunter). Only a few square centimeters are to be done. Then all the spikes will have been planted. Quite a tedious job but I have not found another way then to put them individually one by one.
Thanks James and to all of you mates for your likes. I really hope to get it ready for the Model Show in Moson.

24 March 2023, 18:43

Spanjaard
ypur wheat is perfect!!! It can not get more realistic that pic 130, simply WOW!!!!

24 March 2023, 20:24

Michael Kohl
Hi Spanjaard. I have to admit that I am very pleased too how the wheat turned out. Only the harvested part of the field is not yet to my liking. But I got an idea... 🙂

25 March 2023, 23:17

Kyle DeHart
Man the wheat is awesome!

26 March 2023, 00:22

Michael Kohl
Thanks Kyle for the nice feedback and to you Neil for the like.

26 March 2023, 07:52

Shar Dipree
Very nice, great work. Fine model.

26 March 2023, 07:59

Hanno Kleinecke
What a masterpiece ! Model and base look totally realistic 👍

27 March 2023, 15:50

Michael Kohl
Thank you, Shar.

27 March 2023, 15:50

Łukasz Gliński
Incredible job on the wheat. Hats off for the perseverance! 👍

27 March 2023, 21:07

Villiers de Vos
Very nice work.

28 March 2023, 06:06

bughunter
That is so real, pic 149 and 150 (with another background) can be used to create fake news 🙂

28 March 2023, 07:01

Ralf Topeters
This one looks so real if it weren't on a diorama base it would have totally fooled me. My honest truth. What a masterpiece. It is an early stage of the year but I have to admitt that this one has the potential to become the buld of the year for me on this plattform. Congrats to your skills. 👍 I bow before you! 🙂

28 March 2023, 10:24

Tyson Tu
Amazing work and a fantastic example of rework (the harvested part of the field) paying off!

28 March 2023, 11:23

Robin (WhiteGlint)
Beautiful work!

28 March 2023, 20:09

Spanjaard
a master work. from top to bottom. and in 1/72!

28 March 2023, 20:42

Dean Harpster
Absolutely magnificent! This is a masterclass in diorama building!

1 April 2023, 22:53

Neuling
Da kann ich Dean nur zustimmen. Etwas ganz Besonderes!

2 April 2023, 08:23

Michael Kohl
Guys, you comments are extremely flattering and they mean a lot to me. It is really nice to have you on board.

2 April 2023, 12:10

Tom B.
That figure has an absolutely spot-on pose for the setting... one can litteraly feel the headache creeping up on that guy wondering what even happened to fix his harvester in the midlle of the field!

16 April 2023, 19:57

bughunter
I hope Igor gets it running again!
Absolutely impressive 👍

16 April 2023, 20:07

Spanjaard
Absolute stunner, looking forward the painted figure

16 April 2023, 21:57

Christian Lehmann
👍

17 April 2023, 04:40

Tyson Tu
Awesome work on the figure, especially the shading and highlighting on the overalls!

17 April 2023, 12:08

Bruce Huxtable
Astonishing at 1:35, but this is 1:72! Superb skills, patience, creativity, and determination have created a jewel!

17 April 2023, 12:39

Spanjaard
i wish i could paint 1/35 (or any scale for that mattes) half as good as you did that figure in 1/72, it is fantastic

17 April 2023, 12:49

coporado
Unbelievable its 72, just wow!

17 April 2023, 15:16

Michael Kohl
@Tom B: jep, I really like the pose of that figure too. I can only repeat my recommendation for the Reedoak figures. The ones I have are really fabulous.
bughunter, Spanjaard, Christian, Tyson Tu, Bruce, coporada thanks for the feedback, really made my day.
And a warm Thanks to all who sneeked in and left a like. Very much liked. 🙂

18 April 2023, 10:37

Zsolt Czegle
AWESOME work. I'm really happy to see it in person in Moson this weekend! See you there!

18 April 2023, 11:32

Hanno Kleinecke
This keeps getting even better ! The adition of the figure and tools makes it look even more convincing, especially considering the tiny scale ! 👍

18 April 2023, 14:35

Michael Kohl
Thanks Zsolt and Hanno. Such positive comments from mates whose models I cherish means a lot.
Looking forward to meet in person, Zsolt. 🙂

19 April 2023, 13:30

Michael Kohl
Here are some pictures of the finished project. Started in May 2022 it took me less than a year to complete. Thus it qualifies as a speed build according to my standards. 😉
It was really moving to see the interest in this build, to read your comments and the likes after you visited. You made this a special experience. Thanks a ton for that.
To me this build was special for another reason too, as it is my first model which in the end really looks the way I envisioned it when I started.

A big Thanks to Snake Model too. This well done kit gave me a really good time.

Happy modelling to all of you mates out there.

20 April 2023, 19:18

bughunter
Thanks for this journey! It was a pleasure to watch the creation of this award winning dio 👍 Good luck for Moson!

20 April 2023, 19:26

Spanjaard
Good luck? This beauty does not need luck, it is a killer!!! 😉

20 April 2023, 19:29

Kyle DeHart
It's fantastic and it's been great to follow along with it.

20 April 2023, 23:39

Juergen Klinglhuber
Jaw-dropping result on this 1/72 project. 👀
All my respect for this workman skills. Hat's off.

21 April 2023, 05:41

Marius
As I said it before, this turned out to be one of the prettiest dioramas in 1:72 I have seen here lately.
And that is because of different reasons more or less subtle:
#1 Between tanks and jets there is suddenly an agricultural thingy, certainly an eye catcher
#2 The high level and sharpness of detail on the machine
#3 Spot on weathering with a very realistic look and just the right amount
#4 Very beautiful diorama in itself (the figure painting, the wheat, etc.)
#5 ....and the most important one surpassing the previous points is the genuine amtosphere. It feels like in the 70's in a sunny and very hot summer day in some Eastern steppe. Somehow time stands still in a different era, when the notion of tight schedules and constant rushing weren't an issue.

21 April 2023, 06:16

Neuling
Da kann ich Marius nur zustimmen. Besser kann es nicht gesagt werden.

21 April 2023, 07:53

Vincent
Great show piece. Very nice and creative result!!!

21 April 2023, 09:13

Michael Kohl
Thanks again Frank, Spanjaard, Kyle, Juergen, Marius, Neuling and Vincent for your flattering comments and to all of you guys who visited and left a like.

@Marius: points #2-4 were aspects that I strived to achieve. That you point them out particularly means a lot to me. That this machine evoked childhood memories and the atmosphere you mentioned is more than one cherry on the cake.

22 April 2023, 22:01

Aleksei Pavlov
Всем привет. Отличная работа. Очень понравилась!!! Сначало увидел фото с Мосона. Потом скинули ссылку на автора работы.

23 April 2023, 20:10

bughunter
Did you win anything with this?

24 April 2023, 17:55

Michael Kohl
Yes Frank. Thanks for your interest. 🙂 One was a special recognition as Excellent Model 2023 by Civilian Scale Model Building and in the official category "Master-Class: Diorama civilian vehicles" it received a third place. But maybe even more rewarding than the official awards were a few positive personal comments and seeing it being photographed by other modellers. And - last but not least - it came back into my cabinet without damage. 🙂

24 April 2023, 22:33

Zsolt Czegle
Congratulation Michael!

It was nice to meet you in person!

25 April 2023, 03:52

Spanjaard
Congratulations Michael

25 April 2023, 05:39

bughunter
So thanks fro the update and congratulation! 👍

25 April 2023, 05:52

Neuling
Congrats. Well deserved Michael!

25 April 2023, 06:57

Łukasz Gliński
Congratulations. The logistics of built models is always my biggest fear - and you made it so far and back without any damage! 👍

25 April 2023, 07:33

Tyson Tu
Congrats Michael!

25 April 2023, 11:07

Michael Kohl
Thank you guys for the congrats. Happy to see.

26 April 2023, 20:34

Bruce Huxtable
Very well deserved recognition, congratulations, Michael.

26 April 2023, 20:42

Zsolt Czegle
Congratulation Michael! It's a really awesome work.

I'm glad to met you and be able to see your works in person! See you next year in Moson!

26 April 2023, 21:00

Kyle DeHart
Definitely add my congratulations as well.

26 April 2023, 21:10

Ludvík Kružík
Michael, congratulations on winning the award for this model. You really deserve it!

26 April 2023, 21:36

Michael Kohl
Again, thank you mates for your congratulations.
Zsolt, that was really nice meeting you in Moson and seeing your models live.
Looking forward to next year.

30 April 2023, 19:02