Douglas DC-4, PAA "Clipper Monsoon" (1/144) Se: Lysbildefremvisning Mosaikk Liste 1 November 9, 2021
Found my mom on this Florida, Passenger Lists, 1898-1963 - Arriving at Miami, Florida, June 11, 1946 on PAA NC-88887.
2 November 9, 2021
NC88887 Clipper Monsoon 20th October 1946
3 November 9, 2021
NC88887 Clipper Monsoon 20th October 1946
4 November 9, 2021
N88887 PAA Clipper Monsoon 1945-1952
5 November 9, 2021
200625: Starting point.
6 November 9, 2021
200625: Starting point.
7 November 9, 2021
200625: Starting point.
8 November 9, 2021
200625: Starting point. Detail is actually quite good, just hard to see with the funky silvery plastic.
9 November 9, 2021
200625: Starting point. Engine detail is nice but nearly invisible inside the cowlings.
10 November 9, 2021
200625: Starting point. Decals look good, but I'll be using aftermarket.
11 November 9, 2021
200625: Starting point. Not sure when the DC-4 became a 707.
12 November 9, 2021
200626: Tape-up trial. Detail is somewhat crude, but the fit is nice.
13 November 9, 2021
200626: Telescoping brass rod will be the arrangement for in-flight display.
14 November 9, 2021
200626: That bulkhead is there to trap the ballast and 5-min epoxy.
15 November 9, 2021
200626: Socket installed, secured with CA, will be encased in 5-min epoxy.
16 November 9, 2021
200628: Socket for in-flight pedestal secured with 5-min epoxy.
17 November 9, 2021
200628: Socket for in-flight pedestal filed to shape. Note toothpick struts for balancing trials.
18 November 9, 2021
200629: Filled the spine with 5-min epoxy for rigidity.
19 November 9, 2021
200626: Balancing act.
20 November 9, 2021
200626: 9 grams ballast wasn't quite enough.
21 November 9, 2021
200629: Lead tire weight encased in 5-min epoxy.
22 November 9, 2021
200730: Sealing the forward gear well.
23 November 9, 2021
200730: Sealing the forward gear well.
24 November 9, 2021
200730: Sealing the forward gear well.
25 November 9, 2021
200730: Sealing the forward gear well.
26 November 9, 2021
200730: Sealing the forward gear well.
27 November 9, 2021
200730: Sealing the forward gear well.
28 November 9, 2021
200730: Sealing the main gear wells.
29 November 9, 2021
200730: Sealing the main gear wells.
30 November 9, 2021
200730: Sealing the main gear wells. The rear section is taped over to be filled (from inside) with 5-min epoxy.
31 November 9, 2021
200818: Closing up the wing-to fuselage. (Always sign your work!)
32 November 9, 2021
200818: Closing up the wing-to fuselage. Fit was good, just minor touches filled with CA.
33 November 9, 2021
200818: Closing up the wing-to fuselage. Silver paint is artist's pen.
34 November 9, 2021
200818: Ready for primer!
35 November 9, 2021
200818: Ready for primer! Lucy casts a wary eye.
36 November 9, 2021
200818: Ready for primer!
37 November 9, 2021
200818: Aviation mishap #1 - dropped on her nose.
38 November 9, 2021
200818: Aviation mishap #1 - Minor split seam.
39 November 9, 2021
200818: Thankfully, the brittle clear plastic broke cleanly and fit right back.
40 November 9, 2021
200818: Grey primer coat (WM rattlecan grey primer). Lucy approves.
41 November 9, 2021
200818: Grey primer coat (WM rattlecan grey primer).
42 November 9, 2021
200821: Primer polished and ready for white paint.
43 November 9, 2021
200821: Primer polished and ready for white paint.
44 November 9, 2021
200821: Gloss white undercoat (WM rattlecan gloss white).
45 November 9, 2021
200821: Gloss white undercoat (WM rattlecan gloss white).
46 November 9, 2021
200821: Gloss white undercoat (WM rattlecan gloss white).
47 November 9, 2021
200823: Applying Alclad II metallics over gloss white undercoat.
48 November 9, 2021
200823: Alclad II metallics applied over gloss white undercoat.
49 November 9, 2021
200823: Alclad II metallics applied over gloss white undercoat.
50 November 9, 2021
200905: Trying to re-create the astrodome with a puddle of PVA.
51 November 9, 2021
200909: Painting the anti-icing boots. (WM rattlecan flat black).
52 November 9, 2021
200912: Decals applied. Very pleased with the custom decals from Vintage Flyer!
53 November 9, 2021
200912: Decals applied. Very pleased with the custom decals from Vintage Flyer!
54 November 9, 2021
200912: Decals applied. Very pleased with the custom decals from Vintage Flyer!
55 November 9, 2021
200912: Decals applied. Very pleased with the custom decals from Vintage Flyer!
56 November 9, 2021
200918: Status check with her PAA sisters.
57 November 9, 2021
200919: Ready for flight. (But for the two missing props!)
58 November 9, 2021
200919: Ready for flight. (But for the two missing props!)
59 November 9, 2021
200919: Ready for flight. (But for the two missing props!)
60 November 9, 2021
200919: Ready for flight. (But for the two missing props!)
61 November 9, 2021
200919: DC-4 Certification flight.
62 November 9, 2021
200919: DC-4 Certification flight.
63 November 9, 2021
200919: DC-4 Certification flight.
64 November 9, 2021
200919: DC-4 Certification flight.
65 November 9, 2021
200919: DC-4 Certification flight.
66 November 9, 2021
200919: DC-4 Certification flight.
67 68 69 70 November 10, 2021
Preserved at Frankfurt-Main as part of the Berlin Airlift Memorial.
71 72 73 74 75 76 Kommentarer 25 November 2024, 18:44 -
Album info Douglas DC-4, Pan American World Airways, Registration NC-88887, c. 1946.
(Minicraft kit #14520 ©2001 [original tooling]
While digging into my ancestry on one of those sites, I stumbled across a passenger manifest showing my mom and her family arriving in Miami from San Juan, PR, on 11 June, 1946. I looked up the tail number and found several images of "Clipper Monsoon", a re-purposed C-54 brought into post-war service as a Pan Am Clipper. I had the Minicraft C-54 kit, so… off I went.
This aircraft was delivered to the USAAF in March 1945 as 44-9063, C-54E-5-DO, c/n 27289, and recovered from Reconstruction Finance Corporation by Douglas aircraft for conversion to DC-4. It served with PAA from 1946 to 1952, then with a succession of carriers and private owners until retired in 1989. In 1990 it was retired to the Berlin Airlift memorial at Frankfurt airport where it basks together with a weary C-47 celebrating that massive mission of mercy.
The kit goes together very well and looks the part. Props are much improved over contemporary Minicraft 1/144 airliner releases that are plagued by misshapen and/or uneven propellers. The kit's Candy Bomber decals look the part, but I used instead decals from Vintage Flyer, customized with the correct PAA Clipper name and tail number.
Paints are rattlecan and Alclad II metallic, sealed in Future.
76 bilder
1:144
Fullført
Alle album Se alle albumer »