OV-10A Bronco Project
Kommentarer
96 17 May 2017, 17:05
Cuajete
Thank you Arash.
Updated new pics. Painted propellers and... reflective bands??
Thank you Arash.
Updated new pics. Painted propellers and... reflective bands??
12 July 2017, 20:04
Bart Goesaert
looks very good, especially with the panellines coming out of the model... very nice work...
looks very good, especially with the panellines coming out of the model... very nice work...
15 September 2017, 10:26
Cuajete
Bart Goesaert, Holger Kranich and Ekki: Many thanks for your comments. This is the first model that I end after several years. Kit is tipical old Airfix. Very few details, raised panel lines, hard fit... Interior and some exterior parts are from scratch. Paint is from Gunze (propellers are painting from Lara's metal). Antennas wire are made from fishing line. I hope to make better the Academy's OV-10D kit next time.
Bart Goesaert, Holger Kranich and Ekki: Many thanks for your comments. This is the first model that I end after several years. Kit is tipical old Airfix. Very few details, raised panel lines, hard fit... Interior and some exterior parts are from scratch. Paint is from Gunze (propellers are painting from Lara's metal). Antennas wire are made from fishing line. I hope to make better the Academy's OV-10D kit next time.
16 September 2017, 17:54
Dave Flitton
Excellent - if you can pull this off with an old Airfix, imagine what you can do with the Academy kit!!!
Excellent - if you can pull this off with an old Airfix, imagine what you can do with the Academy kit!!!
3 November 2017, 16:32
Cuajete
Looks like, Łukasz 😛
During the washing process and effects it had measles 😄
They are small oil dots of different colors randomly placed that are diluted and dragged with a brush in the wind direction to create a bit of chromatic variety with that effect. It is difficult to see the result in the pics, but perhaps you can see it in photos 39, 42 and maybe 43 (not black grooves). This is my first time doing this. I did it to test.
Thanks for watching, likes and the feedback, mates.
Looks like, Łukasz 😛
During the washing process and effects it had measles 😄
They are small oil dots of different colors randomly placed that are diluted and dragged with a brush in the wind direction to create a bit of chromatic variety with that effect. It is difficult to see the result in the pics, but perhaps you can see it in photos 39, 42 and maybe 43 (not black grooves). This is my first time doing this. I did it to test.
Thanks for watching, likes and the feedback, mates.
13 May 2021, 19:00
Oliver Zwiener
Great work , made this 7 years ago : modellversium.de/gal..dene-hersteller.html
Great work , made this 7 years ago : modellversium.de/gal..dene-hersteller.html
17 September 2022, 09:00
Cuajete
Many thanks, mates. Your words make me very happy, thank you for these motivating words! I'm really glad that the model is liked and well received!
Oliver, great job for your NOGS. Fantastic result 👍
Many thanks, mates. Your words make me very happy, thank you for these motivating words! I'm really glad that the model is liked and well received!
Oliver, great job for your NOGS. Fantastic result 👍
17 September 2022, 20:49
Cuajete
Many thanks for your comment, Erik.
Upgrading old kits is a challenge, but it can also become an suffered addiction.
Many thanks for your comment, Erik.
Upgrading old kits is a challenge, but it can also become an suffered addiction.
20 September 2022, 18:46
Neil
Fantastic work Cuajete! 👏 I too have built an aged Testors 1/48 Bronco recently, so appreciate the work... Your efforts look brilliant here mate 👍
Fantastic work Cuajete! 👏 I too have built an aged Testors 1/48 Bronco recently, so appreciate the work... Your efforts look brilliant here mate 👍
20 September 2022, 18:50
Dean Harpster
Looks great! Adding the antenna wires really adds realism but I find it hard to do. Very nice work!
Looks great! Adding the antenna wires really adds realism but I find it hard to do. Very nice work!
23 September 2022, 04:53
Cuajete
Dean, Neuling and Guy: Many thanks for your comments. Your words are very appreciated. I think old kits should be given a chance, even if they are not as nice as a newer one.
Dean, I made the antennas with fishing line (I don't remember the thickness). Its base is made with a glob of cyanoacrylate. I should add comments to the photos, like I did in other albums.
I also should change the windshield for a handmade one according to its scale. I should also change the flat tail weights to make ones with a rounder volume. There are more things that should be improved, but I think that would be enough for now.
Thanks for your likes, mates! 👍
Dean, Neuling and Guy: Many thanks for your comments. Your words are very appreciated. I think old kits should be given a chance, even if they are not as nice as a newer one.
Dean, I made the antennas with fishing line (I don't remember the thickness). Its base is made with a glob of cyanoacrylate. I should add comments to the photos, like I did in other albums.
I also should change the windshield for a handmade one according to its scale. I should also change the flat tail weights to make ones with a rounder volume. There are more things that should be improved, but I think that would be enough for now.
Thanks for your likes, mates! 👍
23 September 2022, 17:51
Bernd Grün
You made a little gem of this old kit. Congratulation! I'll take a seat.
You made a little gem of this old kit. Congratulation! I'll take a seat.
31 October 2022, 09:31
David Culp
This is the only OV-10 model I've seen where the propeller blades are correctly painted in two different shades of aluminum. Everybody else misses this detail (or ignores it), including me. Bravo!
This is the only OV-10 model I've seen where the propeller blades are correctly painted in two different shades of aluminum. Everybody else misses this detail (or ignores it), including me. Bravo!
1 November 2022, 19:59
Cuajete
Thanks a lot, David. Your words are very encouraging and appreciated. I only looked at pic 34 and tried to reproduce it on the model. You also have a very nice OV-10BZ. I didn't know about that variation you made.
Thanks to all mates for your likes! 👍
Thanks a lot, David. Your words are very encouraging and appreciated. I only looked at pic 34 and tried to reproduce it on the model. You also have a very nice OV-10BZ. I didn't know about that variation you made.
Thanks to all mates for your likes! 👍
2 November 2022, 20:52
David Culp
I should also add that I like the Euro-One paint scheme you used. I flew the OV-10A in Germany (and sometimes in Spain) back in the early 1980's. It always looks to me like the "proper" colors for the OV-10 🙂
I should also add that I like the Euro-One paint scheme you used. I flew the OV-10A in Germany (and sometimes in Spain) back in the early 1980's. It always looks to me like the "proper" colors for the OV-10 🙂
3 November 2022, 00:20
Cuajete
Thanks again, David. I'm glad to hear that. It is a pleasure to read such lovely words from the hand of a pilot who flew this aircraft. Certainly I also think that the Euro-One is one of the most attractive schemes for the OV-10. Unfortunately there is little offer from the decal manufacturers for this scheme (at least in 1/72 scale). I also plan to build an OV-10D, but haven't decided on the color scheme yet. What air base were you in Spain?
Thanks again, David. I'm glad to hear that. It is a pleasure to read such lovely words from the hand of a pilot who flew this aircraft. Certainly I also think that the Euro-One is one of the most attractive schemes for the OV-10. Unfortunately there is little offer from the decal manufacturers for this scheme (at least in 1/72 scale). I also plan to build an OV-10D, but haven't decided on the color scheme yet. What air base were you in Spain?
3 November 2022, 18:38
David Culp
We went to Zaragoza twice each year to practice shooting rockets at the Bardenas Reales range. The rest of the time we were in Sembach AB, Germany.
We went to Zaragoza twice each year to practice shooting rockets at the Bardenas Reales range. The rest of the time we were in Sembach AB, Germany.
3 November 2022, 19:49
Cuajete
I know that base in Zaragoza. I was living in that city for a few years and I was also there at the NATO Tiger Meet 2016 🙂 👍
I know that base in Zaragoza. I was living in that city for a few years and I was also there at the NATO Tiger Meet 2016 🙂 👍
4 November 2022, 18:53
Cuajete
Thank you very much Dick. It is a pride to read your words knowing the wonderful great projects that you do. I would have liked to improve some parts of the kit and repanel, but I still do not dare to do those things.
Thank you very much Dick. It is a pride to read your words knowing the wonderful great projects that you do. I would have liked to improve some parts of the kit and repanel, but I still do not dare to do those things.
20 November 2022, 18:45
Andy Ball
I loved this kit when I was a kid!, you've done a great job on it Cuajete!!
I loved this kit when I was a kid!, you've done a great job on it Cuajete!!
1 January 2023, 12:49
Cuajete
Many thanks, Andy. This was one of my first kits as a kid. I assembled it unpainted, along with a Gnat, a Viggen and the Airfix F-5 (The Mig from Top Gun). Unos año después, en una etapa posterior del modelismo, comencé a pintar a pincel con el F-4C/D de Monogram.
@Łukasz, I trust that ICM has better fit, better detail, more accurate engine fronts and some really attractive paint schemes like this... but above all a windshield wiper according to the scale and some tail stabilizer's counterweights that are not flat 😄
Happy NY to all mates!
Many thanks, Andy. This was one of my first kits as a kid. I assembled it unpainted, along with a Gnat, a Viggen and the Airfix F-5 (The Mig from Top Gun). Unos año después, en una etapa posterior del modelismo, comencé a pintar a pincel con el F-4C/D de Monogram.
@Łukasz, I trust that ICM has better fit, better detail, more accurate engine fronts and some really attractive paint schemes like this... but above all a windshield wiper according to the scale and some tail stabilizer's counterweights that are not flat 😄
Happy NY to all mates!
1 January 2023, 20:53
Cuajete
Hi mates!
Added comments on all pics. Thanks for watching.
I hope that the new ICM tool is a success and that it offers unusual and striking decorations.
Hi mates!
Added comments on all pics. Thanks for watching.
I hope that the new ICM tool is a success and that it offers unusual and striking decorations.
7 June 2023, 18:56
Jorge Ferreira
Beautifull. I build this one ,one hundred years ago (more or less) I painted it with silver. All of them. Great memories. Thank you Cuajete.
Beautifull. I build this one ,one hundred years ago (more or less) I painted it with silver. All of them. Great memories. Thank you Cuajete.
7 June 2023, 19:02
J R
That is an amazing build from the Aifix fit the OV-10 is my favorite aircraft, I will buy the ICM 1/72 kit even though I already build the ICM 1/48 kit which was a dream to build, I know you will enjoy building the ICM kit
That is an amazing build from the Aifix fit the OV-10 is my favorite aircraft, I will buy the ICM 1/72 kit even though I already build the ICM 1/48 kit which was a dream to build, I know you will enjoy building the ICM kit
7 June 2023, 20:24
Cuajete
Jorge and Joseph, thanks for your kind words. I'm glad that this project has served to remember good old days.
@Wout Mollaert and other mates, thanks for your likes 👍
Jorge and Joseph, thanks for your kind words. I'm glad that this project has served to remember good old days.
@Wout Mollaert and other mates, thanks for your likes 👍
8 June 2023, 19:37
Album info
This is the first model that I end after several years. Kit is tipical old Airfix. Very few details, raised panel lines, hard fit... Interior and some exterior parts are from scratch. Paint is from Gunze (propellers are painting from Lara's metal). Antennas wire are made from fishing line.