B-25G Mitchell "double"
Opmerkingen
3 5 July 2019, 13:49
Roland Sachsenhofer
First pictures of this double-build: The interior of both Mitchells are amazingly detailed, Accurate Miniatures parts are of quite pleasing quality- just a pity nearly everything will be swallowed by the darkness of the assembled fuselages 🙂
Therefore my efforts to get some detail are concentrated around the more visible cockpit area. Bomb bays are awaiting some more parts..... I guess one of them will be shown open with ordnance.
First pictures of this double-build: The interior of both Mitchells are amazingly detailed, Accurate Miniatures parts are of quite pleasing quality- just a pity nearly everything will be swallowed by the darkness of the assembled fuselages 🙂
Therefore my efforts to get some detail are concentrated around the more visible cockpit area. Bomb bays are awaiting some more parts..... I guess one of them will be shown open with ordnance.
5 July 2019, 13:55
Holger Kranich
That Looks cool Roland! I have the same question as Soeren. 🙂 The interior colour is Magic!
That Looks cool Roland! I have the same question as Soeren. 🙂 The interior colour is Magic!
5 July 2019, 13:57
Roland Sachsenhofer
Thank you Soeren- I love it!!! Fit, detail, sophisticated layout, crispness of parts... every quality I can think of is fulfilled. I guess this will last.
Thank you Soeren- I love it!!! Fit, detail, sophisticated layout, crispness of parts... every quality I can think of is fulfilled. I guess this will last.
5 July 2019, 13:58
Michael Hickey
WoW... Your of to a great start Roland and in for one hell of a good time building this beauty. I built an Accurate Miniatures B-25 Mitchell last year and really enjoyed it.👍
WoW... Your of to a great start Roland and in for one hell of a good time building this beauty. I built an Accurate Miniatures B-25 Mitchell last year and really enjoyed it.👍
5 July 2019, 14:03
Roland Sachsenhofer
Thank you Holger! I am totally excited about that kit 🙂 The only matter I know about concerns the "wrong" diameter of the cowlings. I have resin replacements for one of the kits- that should make a nice comparison
Thank you Holger! I am totally excited about that kit 🙂 The only matter I know about concerns the "wrong" diameter of the cowlings. I have resin replacements for one of the kits- that should make a nice comparison
5 July 2019, 14:03
Slavo Hazucha
Must be a pleasure to work on something with a good fit and detail after the early Hurricane fitting inferno... This really looks like a decent kit, the details are lovely and you are treating them with the usual combo of skill & care - looking very good there!
Must be a pleasure to work on something with a good fit and detail after the early Hurricane fitting inferno... This really looks like a decent kit, the details are lovely and you are treating them with the usual combo of skill & care - looking very good there!
5 July 2019, 15:52
Björn Svedberg
Great start Roland! 👍 I too have built the accurate miniatures (B-25B) kit and can attest to the great detail level of the interior. Don't forget the weight in the nose, though. You don't want a tail sitter!😉
Great start Roland! 👍 I too have built the accurate miniatures (B-25B) kit and can attest to the great detail level of the interior. Don't forget the weight in the nose, though. You don't want a tail sitter!😉
5 July 2019, 15:57
Gordon Sørensen
Great looking interior, Roland! Especially like the boot around the base of the control column and the fire axe.
Great looking interior, Roland! Especially like the boot around the base of the control column and the fire axe.
5 July 2019, 18:18
Roland Sachsenhofer
Thank you all mates for these overwhelming comments! You're only too right, Slavo 🙂 What a fun to work with these beautiful molds!
Thank you all mates for these overwhelming comments! You're only too right, Slavo 🙂 What a fun to work with these beautiful molds!
5 July 2019, 18:45
Nathan Dempsey
I'm watching this with interest. I have the Accurate Miniatures C/D model. Yours is looking great already Roland.
I'm watching this with interest. I have the Accurate Miniatures C/D model. Yours is looking great already Roland.
5 July 2019, 19:00
Roland Sachsenhofer
Great! It seems as if AM´s Mitchell is of some interest- and that's understandable, these kit is fabulous.
Great! It seems as if AM´s Mitchell is of some interest- and that's understandable, these kit is fabulous.
5 July 2019, 19:03
Roland Sachsenhofer
Thanks James for comment, the "Doolittle B-25" is a favorite of mine, wold be eager to see it getting build!
Thanks James for comment, the "Doolittle B-25" is a favorite of mine, wold be eager to see it getting build!
7 July 2019, 09:14
Roland Sachsenhofer
Fuselages have been closed and sanded, wings will follow soon. Size is rather impressive 🙂
Fuselages have been closed and sanded, wings will follow soon. Size is rather impressive 🙂
10 July 2019, 16:40
Roland Sachsenhofer
That's for sure! Besides that.... not only red bull gives wings 🙂
That's for sure! Besides that.... not only red bull gives wings 🙂
11 July 2019, 07:18
Roland Sachsenhofer
The base for the paint application is now created, in the next step the grey of the underside is applied once. Below the pre-shading I applied some Alclad, which was masked with masking liquid. This should give a nice effect of chipped paint.
The base for the paint application is now created, in the next step the grey of the underside is applied once. Below the pre-shading I applied some Alclad, which was masked with masking liquid. This should give a nice effect of chipped paint.
13 July 2019, 12:48
Roland Sachsenhofer
Surfaces of both Mitchells have been painted by now- and the masking was rubbed off to display some chipping. To take proper photographs is not so easy because of the very glossiness after having applied a clear coat. Next step will be getting those challenging decals on the bows of these gunships!
Surfaces of both Mitchells have been painted by now- and the masking was rubbed off to display some chipping. To take proper photographs is not so easy because of the very glossiness after having applied a clear coat. Next step will be getting those challenging decals on the bows of these gunships!
16 July 2019, 09:43
Nathan Dempsey
Looking great Roland. I can't wait to see more. I do love dual builds!
Looking great Roland. I can't wait to see more. I do love dual builds!
16 July 2019, 14:01
Bart Goesaert
Nice progress on these, these interiors are exquisite... Nice to see the one with the sherman gun too...
Nice progress on these, these interiors are exquisite... Nice to see the one with the sherman gun too...
16 July 2019, 14:03
Roland Sachsenhofer
Thank you Nathan and Bart! Indeed, double builds seem to be quite a rewarding fun!
That's the gun used in they Sherman? Hell, that's awesome, i did not realize that up to now!
A fellow modeller told me of a befriended B-25 H gunner, who explained him how scary it was firing that gun- for those being fired as well as for those guys firing...... The B-25 seemed to stop in the air, the gun producing as much fire through the muzzle as through the breeches......
Thank you Nathan and Bart! Indeed, double builds seem to be quite a rewarding fun!
That's the gun used in they Sherman? Hell, that's awesome, i did not realize that up to now!
A fellow modeller told me of a befriended B-25 H gunner, who explained him how scary it was firing that gun- for those being fired as well as for those guys firing...... The B-25 seemed to stop in the air, the gun producing as much fire through the muzzle as through the breeches......
16 July 2019, 14:59
Bart Goesaert
I think it was comparable to a HS-129 with the 75mm PAK underneath it.. except that one was completely underpowered..
I think it was comparable to a HS-129 with the 75mm PAK underneath it.. except that one was completely underpowered..
16 July 2019, 15:01
Roland Sachsenhofer
"A smile for the camera"....
The Italeri decals work excellently - it's not easy to cover a round shape like the bow of a Mitchel, but the individual parts are perfectly tailored and the most beautiful thing is that they seem to suck themselves greedily to the surface 🙂
Well, I am very impressed with the quality - and probably a little relieved that this step has been mastered.
Bart, you are probably right; well, I would really like to build a "Tsetse"-Mosquito one day...
"A smile for the camera"....
The Italeri decals work excellently - it's not easy to cover a round shape like the bow of a Mitchel, but the individual parts are perfectly tailored and the most beautiful thing is that they seem to suck themselves greedily to the surface 🙂
Well, I am very impressed with the quality - and probably a little relieved that this step has been mastered.
Bart, you are probably right; well, I would really like to build a "Tsetse"-Mosquito one day...
18 July 2019, 13:29
Holger Kranich
Just hab a look at the review on Britmodeller. The exterior detail is awesome! Now i just need space to store it for a while...😉
Just hab a look at the review on Britmodeller. The exterior detail is awesome! Now i just need space to store it for a while...😉
18 July 2019, 13:50
Nathan Dempsey
The nose-art is really looking awesome Roland. It certainly helps things when the decals cooperate. 🙂
The nose-art is really looking awesome Roland. It certainly helps things when the decals cooperate. 🙂
18 July 2019, 14:25
Slavo Hazucha
The nose-arts are spectacular... A truly flawless fit, could not have turned out better 👍. The two also pack some charisma, albeit they look a little bit irritated...😉
The nose-arts are spectacular... A truly flawless fit, could not have turned out better 👍. The two also pack some charisma, albeit they look a little bit irritated...😉
18 July 2019, 20:55
Bart Goesaert
These have some bite... Colorfull birds. Did you remove the mg's protruding from the nose?
These have some bite... Colorfull birds. Did you remove the mg's protruding from the nose?
19 July 2019, 06:29
Gordon Sørensen
Wow! Excellent decalling, Roland! Must have been nail-biting hoping everything would conform...
Wow! Excellent decalling, Roland! Must have been nail-biting hoping everything would conform...
19 July 2019, 14:46
Roland Sachsenhofer
Wow! Your encouraging words mean a lot to me -thank you all mates! Bart, etched parts mg´s are getting their chance to improve the look of these two gunships.
Wow! Your encouraging words mean a lot to me -thank you all mates! Bart, etched parts mg´s are getting their chance to improve the look of these two gunships.
19 July 2019, 17:34
Slavo Hazucha
Roland, who could have missed this great display from the days when death from above was delivered with style & in bright colors...😉 👍
Roland, who could have missed this great display from the days when death from above was delivered with style & in bright colors...😉 👍
19 July 2019, 19:58
Roland Sachsenhofer
Thank you for your words and your interest, Slavo and Dominik!
Thank you for your words and your interest, Slavo and Dominik!
21 July 2019, 09:20
Thomas Bischoff
very nice work Roland! I would not have dared to apply these decals
very nice work Roland! I would not have dared to apply these decals
21 July 2019, 09:57
Roland Sachsenhofer
Thank you Thomas! The decals seemed to be trust inspiring from the very beginning 🙂
Thank you Thomas! The decals seemed to be trust inspiring from the very beginning 🙂
21 July 2019, 10:48
Guy Rump
Great work Roland, maybe you should do a workshop on applying decals? they are amazing! 🙂
Great work Roland, maybe you should do a workshop on applying decals? they are amazing! 🙂
21 July 2019, 11:24
Roland Sachsenhofer
Thank you very much Guy! Your words are pleasing me, but to be honest there's not much extraordinary to report 🙂 Maybe one thing, which was new to me: trust your fingertip sensitivity! After having applied a lot of decal softener I squeezed out all air inclusions and wrinkles- as long as there was neither left.
Thank you very much Guy! Your words are pleasing me, but to be honest there's not much extraordinary to report 🙂 Maybe one thing, which was new to me: trust your fingertip sensitivity! After having applied a lot of decal softener I squeezed out all air inclusions and wrinkles- as long as there was neither left.
22 July 2019, 09:04
Roland Sachsenhofer
Gentlemen, the first of these two B-25Gs has been finished! I hope you like the pictures; tomorrow I would like to get pictures of the second one in the gallery 🙂
Gentlemen, the first of these two B-25Gs has been finished! I hope you like the pictures; tomorrow I would like to get pictures of the second one in the gallery 🙂
23 July 2019, 10:36
Slavo Hazucha
So the Pikachu-themed one got across the line first!😉
It looks great, surely it´s looking for it´s blue-headed mate to join it soon... Besides the decals with the vibrant colors creating such a cool contrast with the USAAF Green standard pattern, and the classy interior, I really like the weathering combination with shading, the lighter blue chipping on the engine cowlings and the reasonably applied wear down to naked metal along the leading edges. Really well planned and executed list of measures, my respect 👍
Which also brings me to the only question I have - the propellers upon first sight seem to lack any type of wear - blades and the hubs seem just factory-new - is there a purpose/story behind that?
So the Pikachu-themed one got across the line first!😉
It looks great, surely it´s looking for it´s blue-headed mate to join it soon... Besides the decals with the vibrant colors creating such a cool contrast with the USAAF Green standard pattern, and the classy interior, I really like the weathering combination with shading, the lighter blue chipping on the engine cowlings and the reasonably applied wear down to naked metal along the leading edges. Really well planned and executed list of measures, my respect 👍
Which also brings me to the only question I have - the propellers upon first sight seem to lack any type of wear - blades and the hubs seem just factory-new - is there a purpose/story behind that?
23 July 2019, 11:38
Nathan Dempsey
Wow, from the lower angles that nose-art looks MEAN, which I suppose was the purpose! Looks great Roland. I can't wait to see the other one.
Wow, from the lower angles that nose-art looks MEAN, which I suppose was the purpose! Looks great Roland. I can't wait to see the other one.
23 July 2019, 13:24
Roland Sachsenhofer
Slavo, Nathan, thank you for your vivid comments! Indeed, Slavo, there is a reason of those props being brand new: the last have been so worn out, it was not acceptable any longer, they simply had to be changed. Another kind of answer to your comprehensible remark comes in form of the second B-25; these set of props should show wear and tear; I hope you like it as well.
As suggested throughout this building blog: this is a gem of a kit! Well..... get ready to start the engines! 🙂
Slavo, Nathan, thank you for your vivid comments! Indeed, Slavo, there is a reason of those props being brand new: the last have been so worn out, it was not acceptable any longer, they simply had to be changed. Another kind of answer to your comprehensible remark comes in form of the second B-25; these set of props should show wear and tear; I hope you like it as well.
As suggested throughout this building blog: this is a gem of a kit! Well..... get ready to start the engines! 🙂
23 July 2019, 16:20
Daniel Klink
Fantastic double, PAint job and especially the decalwork is superb.. Again FAntastic work Roland 👍
Fantastic double, PAint job and especially the decalwork is superb.. Again FAntastic work Roland 👍
23 July 2019, 18:13
Roland Sachsenhofer
Thank you Nathan, Christian, Daniel and Guy! Your words make me proud!
Thank you Nathan, Christian, Daniel and Guy! Your words make me proud!
23 July 2019, 19:04
Slavo Hazucha
You have all reasons to be proud, the duo looks great, it's fun to discover all the minor differences between them!
Cool project & unbelievable time/quality ratio too!😉
You have all reasons to be proud, the duo looks great, it's fun to discover all the minor differences between them!
Cool project & unbelievable time/quality ratio too!😉
23 July 2019, 21:08
Björn Svedberg
Impressive work, Roland, as always! 👍 The B-25 is another one of my favorite planes, and this kit is a great kit. I've bought the Italeri version, it also contains the parts to build the original B-version, so I'm planning on building another Dolittle raider from it 🙂.
Impressive work, Roland, as always! 👍 The B-25 is another one of my favorite planes, and this kit is a great kit. I've bought the Italeri version, it also contains the parts to build the original B-version, so I'm planning on building another Dolittle raider from it 🙂.
24 July 2019, 18:37
bughunter
A clever idea to build a double - I guess this saves effort, so you you can build more in shorter time 👍 well executed, as usual! I really like the rotating propellers around pic 49😉
A clever idea to build a double - I guess this saves effort, so you you can build more in shorter time 👍 well executed, as usual! I really like the rotating propellers around pic 49😉
24 July 2019, 19:03
Roland Sachsenhofer
Such a reaction is really great! Thank you all guys!
Yeah, these are the motivations to get the next double on the workbench! 🙂
Such a reaction is really great! Thank you all guys!
Yeah, these are the motivations to get the next double on the workbench! 🙂
25 July 2019, 13:45
Bart Goesaert
Nice combo... one with jaundice and one with naevus... 😉
all kidding aside, superbly done as usual...
Nice combo... one with jaundice and one with naevus... 😉
all kidding aside, superbly done as usual...
25 July 2019, 15:15
Roland Sachsenhofer
Thank you very much for your kind comments Bart, Sebastian, Clifford and Tim!
Thank you very much for your kind comments Bart, Sebastian, Clifford and Tim!
26 July 2019, 05:35