Supermarine SpitfireMkIa; 610 squadron RAF Biggin Hill 1940

1
May 27, 2019
major parts cleaned and ready for initial assembly
2
May 27, 2019
quite a nice details for 1/72 kit
3
May 27, 2019
4
May 27, 2019
5
May 27, 2019
6
May 27, 2019
spinner glued together (everything will be the same color)
7
May 27, 2019
8
May 27, 2019
inside of the fuselage painted
9
May 27, 2019
cockpit ready for installation to the fuselage
10
May 27, 2019
one or two places which required small amount of filler and light sand and primer was next
11
May 27, 2019
Mr. Sufracer 1200 thinned 50/50 with levelling thinner - best result every time in my opinion
12
May 27, 2019
13
May 27, 2019
14
May 27, 2019
small bits and bobs ready for paint and weathering
15
May 27, 2019
top and bottom surfaces masked and sprayed with MRP colors (top camo masked with MR. Hyde Masking Putty)
16
May 27, 2019
after removing the masking and the putty the final camo at least
17
May 27, 2019
18
May 27, 2019
19
May 27, 2019
20
May 27, 2019
21
May 27, 2019
small parts sprayed and ready for installation
22
May 27, 2019
2 -3 coats of gloss varnish to get the surface nice and shiny and it's time for decals
23
May 27, 2019
decals were quite thick but easy to work with.
24
May 27, 2019
two or three application of Microscale soft worked almost everytime, only two or three places needed more persuasion with X20A
25
May 27, 2019
26
May 27, 2019
Now the spit will get one or two thin coats of matt varnish and weathering will be next
27
May 28, 2019
A little bit of weathering on the bottom surfaces
28
May 28, 2019
and FINISH! 🙂
29
May 28, 2019
30
May 28, 2019
31
May 28, 2019
32
May 28, 2019
33
May 28, 2019
34
May 28, 2019
35
May 28, 2019
finally together with her little friend
36
May 28, 2019
Really nice kit. Highly recommended!

Commenti

5 27 May 2019, 07:56

Alec K
Very nicely done 👍. MR Hyde looks like an interesting product. Recommended?

15 July 2019, 14:06

Martin Frcka
Definitely. It's really good stuff. One just need to be aware that this stuff is like cold lava (it flows over time). Have a search for this stuff. AK is selling one, same stuff is also sold under the name Panzer putty.
The best results are if you place the stuff on the model and spray the colors right away. I left small snakes over night and sprayed the model the next day (see Mig-15 over Korea) and it was fine. but the snakes were slightly bigger. I was happy with the result, you just need to be aware that this stuff is constantly flowing. I hope this short summary will help.😉 Cheers!

16 July 2019, 04:44

Alec K
Got it - thanks much for the info. Surely worth a try 👍

16 July 2019, 11:58