S.M.T.A. "Heinz" (Seiner Majestät Tauch-Apparat "Heinz")

1
August 27, 2021
"Bullaugen" 🙂
2
August 27, 2021
The positioning lights are as well from Krick (LEDs provided myself)
3
August 27, 2021
The positioning lights are as well from Krick (LEDs provided myself)
4
August 27, 2021
Searchlight (also from Krick, incl. LED)
5
August 27, 2021
could look better, that's where the air supply goes
6
August 27, 2021
7
August 27, 2021
8
August 27, 2021
A rare find from the archives
9
August 29, 2021
Lights are a-go (albeit a bit weak)
10
August 29, 2021
proper positioning lights are key for "Heinz" once he reaches the treacherous bottom of the North Sea 🙂
11
August 29, 2021
proper positioning lights are key for "Heinz" once he reaches the treacherous bottom of the North Sea 🙂
12
September 4, 2021
Russian "diving bell" водолазный колокол still without legs and arms
13
September 4, 2021
Russian "diving bell" водолазный колокол still without legs and arms
my handpainted "O2 tank" is the weakest spot
14
September 4, 2021
Russian "diving bell" водолазный колокол still without legs and arms
again with metal hand wheels
15
September 4, 2021
Russian "diving bell" водолазный колокол still without legs and arms
16
September 4, 2021
Russian "diving bell" водолазный колокол still without legs and arms
needs some aging
17
September 4, 2021
Russian "diving bell" водолазный колокол still will be no match for Heinz (an Airfix 1:76 astronaut for scale (maybe i can get away with them as skaphander divers)
18
September 4, 2021
19
September 4, 2021
An Airfix 1:76 astronaut for scale (maybe i can get away with them as skaphander divers
20
September 4, 2021
21
September 4, 2021
22
September 4, 2021
23
September 4, 2021
24
September 19, 2021
that's Photoshop, by the way - not the real model (just to avoid confusion)
I wanted to find out which pattern looked better, a straight or a tilted one. Well, the tilted one I liked, but it was impossible to realize (at least at my skill level) so I went for an even simpler pattern with just four strikes
25
September 19, 2021
The mask are included with the Pegasus kit, and they are really helpful
26
September 19, 2021
Reality. The shape of the submarine was just too uneven to have diagonal lines. In addition, the (useful) masks tend to be easily lifted with Tamiya tape which would have been a huge problem. (Obviously lots of small parts are still missing, as well as additional painting.
27
September 25, 2021
Little progress 🙁
28
September 26, 2021
The small guy looks OK
29
September 26, 2021
The big guy is not yet complete (the base came with the model as did the squid)
30
October 17, 2021
The Steampunk spider walker is from Germania Figures and of extraordinary quality. My scratch-build cockpit with "glass plates" looks awful, but what should I do - it is supposed to be a submarine scene...
31
October 17, 2021
The Steampunk spider walker is from Germania Figures and of extraordinary quality. My scratch-build cockpit with "glass plates" looks awful, but what should I do - it is supposed to be a submarine scene...
32
October 17, 2021
The Steampunk spider walker is from Germania Figures and of extraordinary quality. My scratch-build cockpit with "glass plates" looks awful, but what should I do - it is supposed to be a submarine scene...
33
October 17, 2021
The Steampunk spider walker is from Germania Figures and of extraordinary quality. My scratch-build cockpit with "glass plates" looks awful, but what should I do - it is supposed to be a submarine scene...
34
October 17, 2021
The Steampunk spider walker is from Germania Figures and of extraordinary quality. My scratch-build cockpit with "glass plates" looks awful, but what should I do - it is supposed to be a submarine scene...
35
October 17, 2021
The Steampunk spider walker is from Germania Figures and of extraordinary quality. My scratch-build cockpit with "glass plates" looks awful, but what should I do - it is supposed to be a submarine scene...
36
October 30, 2021
Deep sea flora, fauna and WTF (3D-printed scenario from Sockelshop)
37
October 30, 2021
Deep sea flora, fauna and WTF (3D-printed scenario from Sockelshop)
38
October 30, 2021
Deep sea flora, fauna and WTF (3D-printed scenario from Sockelshop)
39
October 30, 2021
Deep sea flora, fauna and WTF (3D-printed scenario from Sockelshop)
40
November 7, 2021
Some details are missing (notably Heinz's head until I'll fin a way to disguise the wires), but the main question is: pour the resin or don't pour the resins? I'll probably need 15 l ...
41
November 7, 2021
Some details are missing (notably Heinz's head until I'll fin a way to disguise the wires), but the main question is: pour the resin or don't pour the resins? I'll probably need 15 l ...
42
November 7, 2021
Some details are missing (notably Heinz's head until I'll fin a way to disguise the wires), but the main question is: pour the resin or don't pour the resins? I'll probably need 15 l ...
43
November 7, 2021
Some details are missing (notably Heinz's head until I'll fin a way to disguise the wires), but the main question is: pour the resin or don't pour the resins? I'll probably need 15 l ...
44
November 7, 2021
Some details are missing (notably Heinz's head until I'll fin a way to disguise the wires), but the main question is: pour the resin or don't pour the resins? I'll probably need 15 l ...
45
November 7, 2021
Some details are missing (notably Heinz's head until I'll fin a way to disguise the wires), but the main question is: pour the resin or don't pour the resins? I'll probably need 15 l ...
46
November 7, 2021
Some details are missing (notably Heinz's head until I'll fin a way to disguise the wires), but the main question is: pour the resin or don't pour the resins? I'll probably need 15 l ...
47
November 7, 2021
Some details are missing (notably Heinz's head until I'll fin a way to disguise the wires), but the main question is: pour the resin or don't pour the resins? I'll probably need 15 l ...
48
November 7, 2021
Some details are missing (notably Heinz's head until I'll fin a way to disguise the wires), but the main question is: pour the resin or don't pour the resins? I'll probably need 15 l ...
49
November 21, 2021
Some folks added, from three fractions, two claiming the territory, one (+one) suffering a horrible demise, all suffering from ejector marks and holes that i might conceal by adding flexible pipes for air supply...
50
November 21, 2021
Some folks added, from three fractions, two claiming the territory, one (+one) suffering a horrible demise, all suffering from ejector marks and holes that i might conceal by adding flexible pipes for air supply...
51
November 21, 2021
Some folks added, from three fractions, two claiming the territory, one (+one) suffering a horrible demise, all suffering from ejector marks and holes that i might conceal by adding flexible pipes for air supply...
52
November 21, 2021
Some folks added, from three fractions, two claiming the territory, one (+one) suffering a horrible demise, all suffering from ejector marks and holes that i might conceal by adding flexible pipes for air supply...
53
November 21, 2021
Some folks added, from three fractions, two claiming the territory, one (+one) suffering a horrible demise, all suffering from ejector marks and holes that i might conceal by adding flexible pipes for air supply...
54
November 21, 2021
Some folks added, from three fractions, two claiming the territory, one (+one) suffering a horrible demise, all suffering from ejector marks and holes that i might conceal by adding flexible pipes for air supply...
55
November 21, 2021
Some folks added, from three fractions, two claiming the territory, one (+one) suffering a horrible demise, all suffering from ejector marks and holes that i might conceal by adding flexible pipes for air supply...
56
November 21, 2021
Some folks added, from three fractions, two claiming the territory, one (+one) suffering a horrible demise, all suffering from ejector marks and holes that i might conceal by adding flexible pipes for air supply...
57
November 21, 2021
Some folks added, from three fractions, two claiming the territory, one (+one) suffering a horrible demise, all suffering from ejector marks and holes that i might conceal by adding flexible pipes for air supply...
58
November 21, 2021
Some folks added, from three fractions, two claiming the territory, one (+one) suffering a horrible demise, all suffering from ejector marks and holes that i might conceal by adding flexible pipes for air supply...
59
November 21, 2021
Some folks added, from three fractions, two claiming the territory, one (+one) suffering a horrible demise, all suffering from ejector marks and holes that i might conceal by adding flexible pipes for air supply...

Hozzászólások

23 27 August 2021, 10:29

Robin (WhiteGlint)
This looks interesting!
Watching. 👀

27 August 2021, 11:52

Thomas Espe
Following

27 August 2021, 12:21

Dash Rendar
Very interesting!

27 August 2021, 13:36

Robert Podkoński
Cool! Following of course 😉

27 August 2021, 14:07

Dietmar Bogatzki
Fantastic following 👍

27 August 2021, 16:35

Torsten
😎 idea, I'll watch

28 August 2021, 09:14

Martin R.
Thanks, guys!

29 August 2021, 08:50

Torsten
WOW, so 😎 ❤️️ it

19 September 2021, 13:44

Neil
Me too 👀

25 September 2021, 13:20

Spanjaard
not the usual subject. nice 🙂

25 September 2021, 13:31

Bruce Huxtable
Really cool 👍

25 September 2021, 14:27

JD
You get the word excellent from me today, not a word I hand out easily. 😁

25 September 2021, 19:58

Martin R.
Thanks, guys, way too generous feedback (I did not include close-ups 🙂 )

26 September 2021, 10:11

Torsten
I think that the cockpit fits Steam Punk quite well

17 October 2021, 14:28

Torsten
Now I see how big Heinz is, I know the submarine. I like well in the composition 👍

8 November 2021, 15:30

Rewop
Those are all very cool and unusual. Well done, they look great.

8 November 2021, 15:55

Bruce Huxtable
It's all coming together splendidly 👍 Resin? It deserves an aquarium 😉

8 November 2021, 16:04

Spanjaard
Impressive!!!!!

8 November 2021, 22:04

Dominik Weitzer
cool stuff 🙂

9 November 2021, 09:16

Martin R.
Thanks, guys! Now I just have to decide if I buy 10-15 l of resin to pour...

9 November 2021, 12:03

Spanjaard
why not simply put some transparent walls on it. you can give them a light blue transparent color. of course, you will have no bubbles but.....

9 November 2021, 13:16

Martin R.
Maybe that's the way to go... I still have some m² of acrylic glas plates that I need anyhow to "seal" the cube when (if) pouring...

10 November 2021, 10:54

Project info

S.M.T.A. "Heinz" (Seiner Majestät Tauch-Apparat "Heinz")

59 képek

1:72

Befejezve

1:35 Deep Sea Mech -Front46- (MAiM MAIM35614)

1:144 The Nautilus (Pegasus Hobbies 9120)

1:20 20 MechatroWeGo No. 3, Retro. (Hasegawa 64745)

1:72 Auto Gunner (Germania Figuren GF 72-Steam 002)

Összes album

Összes album megtekintése »