Mitsubishi G4M1 "Rikko" Betty Kanyoa Air Goup Malaya Dec 1941
Hozzászólások
92 13 May 2021, 15:33
TreehuggerWould you you consider using a vacuum shaped canopy for this build?
I've started to browse vacuum canopy parts separately, then to track back to kits that the vac forms would fit. Though in my experience some vac canopies aren't that great (not blemish free glass). One canopy piece was even dented when I got it in my mail. 🙁
14 May 2021, 11:45
Sebastian MeynerDaniel....is that really you? What are u doing outside of 72nd scale?! 😛
Following! 👍
14 May 2021, 16:18
Daniel KlinkWelcome Mates, glad to have you all here 👍
So we started with the interior assembling and filling some ejector marks.
But Tamiya especially in 48 is really amazing crisp and clean stuff wow!!
23 May 2021, 20:52
Andrea MorrisHere's my attempt in case you're interested. Admiral Yamamoto's Transport | Album by Manic Dragon (1:48)
23 May 2021, 21:28
Daniel KlinkThank you Guillaume, much appreciated mate👍
Despite of lacking of interior and aftermarket upgrades this is real cool kit and fun 👍
26 May 2021, 22:43
Erik LeijdensLooks mighty fine already Daniel! Never knew Tamiya released a Betty in the past, I must be living under a stone I guess 🙂
28 May 2021, 08:12
Daniel KlinkThank you Clifford, erika and Alex much appriciated mates👍
@Erik, just for 25 years enough time left to get and build one left 🙂
28 May 2021, 09:20
Daniel KlinkThank you David, yes most manufacturers ignore the Crews!
Whoa that really is a big Cigar....
28 May 2021, 16:59
James CNice progress Daniel. The crew looks great and the addition of maps and other smaller details to the navigator and radio positions are a nice touch. Looks to be coming together nicely. 👍
28 May 2021, 18:37
Daniel KlinkYes, despite of lack o interior detail and the rather bad done weapons it is great.
30 May 2021, 21:36
Clifford KeeslerProbally can find after market weapons for it. I will check it out and see if I can find one in stock somewhere.
31 May 2021, 01:02
Clifford KeeslerNo I have not. I always forget about Hannants. I will check them out. I checked my usual shops, and of course all not in stock. But I will keep looking.
2 June 2021, 22:12
Andrea MorrisChuffed for you Cliff. Some folks don't know about Hannants, but if it's hard to find Hannants often have it. Only one left Spanjaard!!!
3 June 2021, 01:10
Spanjaardthanks Andrea, but I meant I was to late to offer one to buy 😉 for some reason i was seeing the post from Clifford about not finding one, but not the one where he got one.
i left the links just in case somebody else was looking for it
3 June 2021, 06:47
Daniel KlinkCongrats Clifford for your catch 👍
It is really big btw. just in case i forgot to mention it before! 🙂
4 August 2021, 20:54
Daniel KlinkBig Plane.. Powerful tools!.Never needed this kind of powerful pressure before🙂
6 August 2021, 13:23
Spanjaardsimple ideas are usually great idea. I hope it does not leave marks in the plastic
6 August 2021, 13:40
David JanuskaWhat happened Daniel, you've left the Braill scale😉. But result is the same perfect as in 1/72 👍.
6 August 2021, 13:47
Daniel KlinkHi spanjaard, yap everything went fine no marks or something and now it fits like a charme.
Just someminor sanding and filling needed.. 👍
@David Thank you mate..dont worry the 72 stays 1st choice. But there is no good G4M1 around
in 72 so i have to do this Monster!! 🙂
And gosh it is huge! nearly takes the whole A2 mat.
6 August 2021, 22:18
Daniel KlinkThank you so much Rui, Spanjaard and Clifford for the positive feedback!.
So the masking is done Phew!!and the Airframe is almost completely fitted together!..
That masking stuff is really one of the challenging stuff with japanese Aircraft, esp. Bombers. 🙂
8 August 2021, 21:35
James CLooking great Daniel, especially the extensive masking 👍 Any issues encountered with the assembly? I'm eyeing up mine at present
8 August 2021, 22:22
Daniel KlinkHi James, Thank you very much mate!
The only issue is the fuselage part behind the side canopys to the rudders.
There the fuselage is nearly empty inside and i had to cut away the locator pins to get both sides
Fitted perfectly.
8 August 2021, 22:29
JohnExcellent work so far. I too have a Betty in my stash and look forward to getting her on the bench. Are you planning an overall green or two-tone paint scheme?
9 August 2021, 00:14
Slavo HazuchaLet´s take a seat for another of those beautiful birds doomed to fight a lost war... Always a pleasure to watch this channel 😉
9 August 2021, 08:30
Daniel Klink@Jamesmy pleasure mate?
@john and Rui thank you very much and welcome mates?
I will do the two tone scheme as with the G3M john.
@slavo you are always welcome and you are right. The early successes were soon just wastepaper.
Glad you like them though👍
9 August 2021, 11:27
Daniel KlinkWelcome Guy, much appreciated and glad you lik it so far 👍
Hi David, in fact the Fuslage is as big. In diameter ist is bigger btw.
9 August 2021, 20:30
JEAN-LUC LELODEYNice progress, the pilots are very successful. I did not know the trick of Cable tie, i will use it.
Wait to see more...
10 August 2021, 16:28
Daniel KlinkThank you guys very much appreciated?
The kit comes with crew! They are really well done!
11 August 2021, 17:00
Slavo HazuchaJust noticed the Revell contacta glue applicator in the back - this ain't a small feat at all! 😮
11 August 2021, 19:22
Daniel Klink@David Tamiya has a heart für us modellers 🙂
@Salvo, but it is the small one by Revell! But you are right not small at all!
Ok compared to a B-29 in this scale... It i sthe shape of the fuselage that let this one look so huge.
[img1]
12 August 2021, 19:36
Clifford KeeslerFinally got mine, plus have a few other Japanese aircraft, I fear my attempts will be a joke compared to your works, and prop planes used to be my favorites.
12 August 2021, 23:23
Daniel KlinkVery cool Clifford, and you make me Blush again?
Iam sure your results will be as brillant, as your jet projects?
15 August 2021, 11:32
Daniel KlinkHi, engines are in progress...
Though just a relief, they are made quiet good by tamiya!
Only added some copperwire as ignition cables.
26 August 2021, 13:49
RuiIt looks just like the cucumber proposal pic you posted. Now I will never look at it the same again 🤪
11 September 2021, 16:07
Daniel KlinkThank you James..but i o not think i will do another aircraft of this size in 1/48🙂
11 September 2021, 20:08
Simon NagorsnikYour newest project looks interesting, I am already looking forward to the results
you inspire me to start my japan af project ... soon 😅
12 September 2021, 18:04
Daniel KlinkThank you David, Cliffors, Guillaume and Simon very much appreciated words mates ! 👍
@David yap right tomorrow i will go grocery shopping 🙂
@Simon Go for it They are still too rare seen those Hinomaru Birds.
12 September 2021, 20:06
Daniel KlinkBTW: I think i got used to those flexible Airbrush stencils. The effect is really not bad.
12 September 2021, 20:07
Andrew HortonWow! Looks like you've got some great paint schemes going there.
13 September 2021, 09:47
Slavo HazuchaSome serious blue cheese finish all over the airframe! 👍 😉
type 91 torp also looking quite fresh!
13 September 2021, 14:09
Clifford KeeslerThat paint job is looking very promising Daniel. I need to try those air brush stencils.
14 September 2021, 01:47
Daniel KlinkThank you very much Adam, Flight Line, Slavo and Clifford for your nice and encouraging words 👍
@Clifford go and get one you will like it, i promise.
@Slavo yap some Gorgonzola appearance 🙂
15 September 2021, 18:49
Daniel KlinkYOu have to spray in very thin layers!
But i like the effect already
19 September 2021, 14:34
Daniel KlinkThank you so much David, Sebastian, Christian, Rui, John and Clifford!
Makes me somewaht happy that you like my work 👍
@John i use, Ak interactive and Real colors for this build! With the specific thinner they are quite well to handle.
Only the underside is sprayed with Gunze Aquaeous.
21 September 2021, 19:53
Simon Nagorsnikyour pre shading technique works really well,it´s a top result!
21 September 2021, 20:41
Daniel KlinkThank you Simon, and i am quite satisfied too with the progress so far!
Though the Ak interactive colors have to been sprayed quick and only work with their specific thinner. So you have to use the special real color thinner from Ak for their Real Color range🙂
22 September 2021, 10:58
Simon Nagorsniki´ve also some rc colors in stock, used them with tamiya´s "yellow cab" thinner
but i don´t like them so much because i always get a too matt surface and they darkened me too much
maybe I was doing something wrong but now i´m really happy with my vallejo´s 😁
22 September 2021, 15:15
bughunterIt looks like you are working slowly on this bird and takes your time - this pays back massively! 👍
22 September 2021, 17:15
JohnDaniel - I am a big fan of the AK Real Colors and have had good luck with them. I usually mix them pretty thin, at least 50% with their thinner. I used them on my Corsair and Skyray and it turned out well. I also have many colors of the Vallejo Model Air line, but have mixed results with them - still have not figured out the right mixture yet.
23 September 2021, 01:07
Daniel KlinkHi mates, thank you very much for your kind and warm
Words!
A pity that photos does not show the whole effect!
Only in the ligted areas!
@ john they are absolute ok but for such large areas it is quite demanding to keep it fluent evenly😉
23 September 2021, 15:57
Daniel KlinkThank you very much Guy, much appreciated 👍
And i got the feeling that you got infected with the hinomaru AC's, when i follow your projects and Albums 👍
23 September 2021, 20:21
Guy RumpYou're right Daniel, I am building up a collection of WW2 hinomaru ACs, the bug has got me! 🙂
24 September 2021, 14:47
Robin (WhiteGlint)👀
Paintjob is really nice. 👍
I think the result of your pre-shading is easier to see on this giant bird.
24 September 2021, 15:49
Daniel KlinkThank you James, Miro and white Glint... really appreciate those comments mates👍
@ guy yeah and your progress is visible with every build mate 👍
24 September 2021, 22:34
Björn SvedbergThat is a great looking paint job! I like the layering technique you are using. Nice build log too. 👍
26 September 2021, 05:15
Slavo HazuchaGreat paintjob and shading on both color tones - I was grilling some of our home-grown zucchini today, and they were pretty much in this green paint range... which I guess is a good thing! 😄
Seriously cool job, agree with bughunter, could be on the top! 👍
26 September 2021, 19:01
Daniel KlinkReally appreciate your positive feedback mates!
Thank you very much!👍👍👍
29 September 2021, 11:29
Sebastian MeynerLooking better and better 👍 Did you use the kit's decals? If you did, they're hardly visible and lay down nicely ….you mastered Tamiya decals better than almost anyone else 🙂
2 October 2021, 03:52
Jan VoorbijGuy, the bug got us too... : modelbrouwers.nl/phpBB3/viewforum.php?f=284
2 October 2021, 09:05
Daniel KlinkHi Mates,
thank you for your kind comments 👍
@Sebastian..thank you and yes i use the Kits decals for the unit numbers and the small stencil under the elevators.
The Hinomarus are sprayed becaus the decals in the kit crumbled apart.
@Jan very cool 👍
3 October 2021, 13:12
Bernhard SchrockSchick! Insbesondere die sehr aufwändige Verglasung finde ich klar und sauber gelungen.
3 October 2021, 16:15
Daniel KlinkDanke Dir Bernhard, freut mich sehr das Dir das Ergebnis gefällt 👍
Thank you Mark and now I call this one Finished !!!!
3 October 2021, 19:57
Simon NagorsnikIt's finished?!- awesome work mate!!
I'm warching for your next project🙂
3 October 2021, 20:14
Daniel KlinkThank you very much Mates for your support and nice comments and your endurance through this project..!
Your nice and constructive Feedback was very much appreciated thanks again 👍
Now the Kanoya goup is complete and ready to go for the Z-force 🙂
3 October 2021, 22:28
Hanno KleineckeVery realistic looking result, most skilled build and paintjob, Daniel 👍
4 October 2021, 07:44
Daniel KlinkWow! That somewaht overwhelming! Thank you so much Mates...
Really appreciate your support and warm words.
My pleasure gentlemen 👍👍👍
4 October 2021, 20:40
bughunterThis is your best Daniel, since you avoided error made in haste! Wonderful 👍
5 October 2021, 09:16
Erwin LeetinkThat is great work you performed there.... I am happy that I was allow to take place in this ride 🙂
6 October 2021, 06:54
Daniel KlinkThank you so much Christoph, Frank, Roberto and Erwin👍
Your positive feedback is very much appreciated, and makes me blush😳
15 October 2021, 21:27
Daniel KlinkThank you Henry, very much appreciated and glad toread you again mate 👍
16 October 2021, 21:41
akira kitaAt that time, Japan was not advanced in mechanical technology. However, you have shown a lot of modelers in your wonderful work the process of effort that leads to the present.
17 October 2021, 23:52
Daniel KlinkHi Akira and thank you very much for your very nice and honoring words for my work mate 👍
Ive been always fascianted by the fast and consequent uprise and Transition by Japan and the mixture of tradition and Hi-tech til today.
20 October 2021, 13:07
Daniel KlinkDonated the Betty a "small" base aka "Cookie" 🙂
Figures and a small vehicle is incoming!
27 October 2021, 19:05
Album info
Hi like the GM3 this is also a bird of the Kanoya Air group that took part in the Campaign against the British Z-Force
(Result: Victory)