[Revell] Porsche 911 Carrera 3.2 Coupe (WIP)
1
December 3, 2023Washed2
December 3, 2023Trimming and categorized by color.3
December 3, 2023This kit has several shrunken molds.4
December 3, 2023The cover is designed to open and close, but it does not close properly, so after attaching tape to secure it...5
December 3, 2023Put it in the dish dryer for a day, it will be properly fixed like this.6
December 3, 2023It was time to paint black, so I masked off the windshield to paint it as well.7
December 3, 2023Black surfacer.8
December 3, 2023then, painted body colors.9
December 3, 2023and then, The spokes of the wheel were lightly masked and the rim was painted chrome.10
December 3, 2023I belatedly screwed a deep hole in the muffler.11
December 3, 2023Now I painted the remaining secondary colors.12
December 3, 20231st. clear coat was applied.13
December 3, 2023When applying a clear coat over a metallic color, you must be careful not to paint too richly.
14
December 3, 2023If you zoom in like this, you can easily see the difference between the two.
L: heavily coated, R: lightly coated
PS: As the metallic particles become rougher, the color changes slightly.
Therefore, as shown on the right, it is better to lightly coat it first, dry it until it becomes crispy, and then apply an additional heavy coat.
15
December 3, 2023The gear stick looked a bit clunky, so I cut it off and modified it by transplanting a clothes-pin.16
December 3, 2023This is how dangerous the hobby of models is. 😉17
December 3, 2023The manual says to paint it clear red, but when I looked up pictures of the actual car, it seemed like the transparency was slightly different.
So, first I painted clear red and then partially masked it...18
December 3, 2023I lightly covered the white color from the inside.19
December 3, 2023I shaved off the original mold to apply the 3D decals that were recently released for this kit.20
December 3, 2023I thought a lot about what color to paint the interior.
I chose a yellow interior for the silver car and a red interior for the black car.
21
December 3, 2023I took another shot during the day and corrected the colors to match what the eye sees in real life.
I think I got the colors just right. 🙂22
December 12, 2023Painted with brush.23
December 12, 2023Cleaned up the surface for glossy.24
December 12, 2023I got greedy and the paint came off.25
December 12, 2023Anyway, polishing done.26
December 12, 2023I swapped them for fun.27
December 12, 2023This is the last masking.28
December 12, 2023I painted a black surfacer instead of matte black.29
December 12, 2023It looks like it was masked incorrectly.30
December 12, 2023Repaired.31
December 12, 2023Ready to assemble.32
December 12, 2023Applied Quinta Studio - 3D decal.
The quality is very good, but given the price, I think it would be more efficient to use it on a car with an open roof.
33
December 12, 2023There's nothing special about the assembly, just follow the instructions.34
December 12, 2023The brake discs are not chrome paint, but a regular metallic paint called IPP's Metallic Silver.
If you can get your hands on this inexpensive, quality paint, I highly recommend it.35
December 12, 2023I was surprised at how well the parts fit together, unlike some of the older level products.36
December 12, 2023Originally, I thought the Rebel kit was fun to assemble the internal parts, but I was very satisfied with the improved fitting. 🙂37
December 12, 2023Next I need to assemble the cabin, so I pre-assembled these first.38
December 12, 2023Since the seats are shaped differently on the left and right, you will need to attach them to fit the driver/passenger seat.39
December 12, 2023Assembled interior.40
December 12, 2023I decided to place the colors like this41
December 12, 2023I used Hasegawa Mirror Sheet and Morotow Liquid Chrome.
I recommend AK Chrome, which is a quarter of the price of Morotow.42
December 12, 2023Assembled front/rear lamps.43
December 12, 2023Afterwards, the remaining parts were simply assembled according to the instructions, and finally, metal stickers and a three-dimensional emblem were attached.44
December 12, 2023Done.45
December 12, 2023Thanks for watching 🙂46
December 15, 2023Oh, This point was roughly done with a marker pen. 😉
Hozzászólások
19 December 2024, 07:45 -