Beriev Be-4 (KoR-2) Sea Sick Sig
![Album image #1 Album image #1](/albums/img/8/1/4/927814-28369-58-720.jpg)
![Album image #2 Album image #2](/albums/img/8/2/6/927826-28369-17-720.jpg)
First internal details added. More to come
![Album image #3 Album image #3](/albums/img/8/2/7/927827-28369-57-720.jpg)
also on the other side
![Album image #4 Album image #4](/albums/img/8/2/8/927828-28369-50-720.jpg)
first test fit - looking really good
![Album image #5 Album image #5](/albums/img/8/2/9/927829-28369-86-720.jpg)
![Album image #6 Album image #6](/albums/img/8/3/0/927830-28369-85-720.jpg)
even the joint - fuselage-wing is looking perfect
![Album image #7 Album image #7](/albums/img/8/3/1/927831-28369-85-720.jpg)
![Album image #8 Album image #8](/albums/img/8/3/2/927832-28369-86-720.jpg)
More details...
![Album image #9 Album image #9](/albums/img/8/3/3/927833-28369-20-720.jpg)
additional interior details, which will be painted separately
![Album image #10 Album image #10](/albums/img/8/3/4/927834-28369-42-720.jpg)
front bottom section with ribs and seat structure
![Album image #11 Album image #11](/albums/img/8/3/5/927835-28369-18-720.jpg)
![Album image #12 Album image #12](/albums/img/8/3/6/927836-28369-49-720.jpg)
![Album image #13 Album image #13](/albums/img/8/3/7/927837-28369-51-720.jpg)
and another test fit. Everything is matching perfectly.
![Album image #14 Album image #14](/albums/img/8/3/8/927838-28369-54-720.jpg)
![Album image #15 Album image #15](/albums/img/8/3/9/927839-28369-75-720.jpg)
rear section getting some attention
![Album image #16 Album image #16](/albums/img/8/4/0/927840-28369-89-720.jpg)
test fit of front cover piece (two version of the cover in the kit - depending on the version early/late)
![Album image #17 Album image #17](/albums/img/8/4/1/927841-28369-59-720.jpg)
![Album image #18 Album image #18](/albums/img/8/4/2/927842-28369-68-720.jpg)
nasty big crack on one of the upper halves of the wing - glued together without any problem.
![Album image #19 Album image #19](/albums/img/8/4/3/927843-28369-56-720.jpg)
![Album image #20 Album image #20](/albums/img/8/7/2/927872-28369-92-720.jpg)
some parts are already marked red with correct part number.
![Album image #21 Album image #21](/albums/img/8/4/4/927844-28369-49-720.jpg)
some discrepencies are still present - here lower part is 101 and not 109
![Album image #22 Album image #22](/albums/img/8/7/4/927874-28369-96-720.jpg)
part 109 is already glued on the right halve of the fuselage
![Album image #23 Album image #23](/albums/img/8/4/5/927845-28369-14-720.jpg)
small bits and bobs
![Album image #24 Album image #24](/albums/img/8/4/6/927846-28369-94-720.jpg)
rear gun holder glued together and ready for paint
![Album image #25 Album image #25](/albums/img/8/4/7/927847-28369-77-720.jpg)
![Album image #26 Album image #26](/albums/img/8/4/8/927848-28369-92-720.jpg)
tail planes (horizontal and vertical) ready for final assembly
![Album image #27 Album image #27](/albums/img/8/4/9/927849-28369-56-720.jpg)
floaters glued together
![Album image #28 Album image #28](/albums/img/8/5/0/927850-28369-26-720.jpg)
![Album image #29 Album image #29](/albums/img/8/7/5/927875-28369-29-720.jpg)
Wing assembly is confusing at first glance, but after few minutes playing with all parts - it make sense.
BUT!
BUT!
![Album image #30 Album image #30](/albums/img/8/7/3/927873-28369-55-720.jpg)
next step - adding parts 124 (4 small parts - basically bomb rack /holders). If your version is with them, they should be added next. Problem is, they were designed to go from the inside. I have figured this half way gluing the wing together so I managed to glue in two outer ones from inside, the inner two needed to be slightly sanded down and then they fit in place. Highly reccommend to anyone, who will be building this kit to glue them in first, before the main wing assembly.
![Album image #31 Album image #31](/albums/img/8/5/1/927851-28369-89-720.jpg)
and the wing is glued together
![Album image #32 Album image #32](/albums/img/8/5/2/927852-28369-76-720.jpg)
![Album image #33 Album image #33](/albums/img/8/5/4/927854-28369-69-720.jpg)
But they look good anyway.
![Album image #34 Album image #34](/albums/img/8/5/6/927856-28369-37-720.jpg)
![Album image #35 Album image #35](/albums/img/8/5/3/927853-28369-21-720.jpg)
The only small gap I had from the wing assembly is on one side, where I glued small strip of styrene and sanded it down to close the gap as much as I could. Fortunately, the filling will be minimal.
![Album image #36 Album image #36](/albums/img/8/5/5/927855-28369-43-720.jpg)
![Album image #37 Album image #37](/albums/img/8/5/7/927857-28369-52-720.jpg)
First parts of the engine
![Album image #38 Album image #38](/albums/img/8/5/8/927858-28369-44-720.jpg)
not sure if the part on the right is supposed to be glued in. Will have to contact the manufacturer. Photos of the test build are not showing that part used.
Edit: Ok. So I got response from MARS Models regarding the inner part 29). It is supposed to be airflow deflector (stamped sheetmetal part IRL). And, I will quote, "you can not use this part if you do not plan to open the engine compartment". Since I'm having the engine cowling closed, I do not need to use the part.
Also I would like to thank to MARS Models for the help and clarification. So if anybody from MARS Models is reading this - big thank you.
Edit: Ok. So I got response from MARS Models regarding the inner part 29). It is supposed to be airflow deflector (stamped sheetmetal part IRL). And, I will quote, "you can not use this part if you do not plan to open the engine compartment". Since I'm having the engine cowling closed, I do not need to use the part.
Also I would like to thank to MARS Models for the help and clarification. So if anybody from MARS Models is reading this - big thank you.
![Album image #39 Album image #39](/albums/img/8/5/9/927859-28369-92-720.jpg)
not sure if this is how it should look like
![Album image #40 Album image #40](/albums/img/8/6/0/927860-28369-40-720.jpg)
or this
![Album image #41 Album image #41](/albums/img/8/6/1/927861-28369-30-720.jpg)
![Album image #42 Album image #42](/albums/img/8/6/2/927862-28369-28-720.jpg)
![Album image #43 Album image #43](/albums/img/8/6/3/927863-28369-61-720.jpg)
Cockpit painted, slightly weathered (not much will be visible from the outside anyway)
![Album image #44 Album image #44](/albums/img/8/6/4/927864-28369-73-720.jpg)
![Album image #45 Album image #45](/albums/img/8/6/5/927865-28369-92-720.jpg)
![Album image #46 Album image #46](/albums/img/8/6/6/927866-28369-51-720.jpg)
![Album image #47 Album image #47](/albums/img/8/6/7/927867-28369-87-720.jpg)
![Album image #48 Album image #48](/albums/img/8/6/8/927868-28369-25-720.jpg)
![Album image #49 Album image #49](/albums/img/8/6/9/927869-28369-99-720.jpg)
![Album image #50 Album image #50](/albums/img/8/7/0/927870-28369-86-720.jpg)
![Album image #51 Album image #51](/albums/img/8/7/1/927871-28369-77-720.jpg)
Now the, so far biggest issue of this kit (at least for me). Film for instrument panel.
I think there was some scaling issue... 😄
I think there was some scaling issue... 😄
![Album image #52 Album image #52](/albums/img/8/7/6/927876-28369-51-720.jpg)
Nothing that can be fixed. traced the pe part on thin plastic sheet, cut out the holes and the perimeter, cleaned a bit
![Album image #53 Album image #53](/albums/img/8/7/7/927877-28369-25-720.jpg)
painted, glued on the main instrument piece
![Album image #54 Album image #54](/albums/img/8/7/8/927878-28369-41-720.jpg)
![Album image #55 Album image #55](/albums/img/8/7/9/927879-28369-75-720.jpg)
and slowly started to cut all instruments from the film sheet and glue them to the correct place
![Album image #56 Album image #56](/albums/img/8/8/0/927880-28369-54-720.jpg)
I think it will be all right.
![Album image #57 Album image #57](/albums/img/8/8/1/927881-28369-33-720.jpg)
![Album image #58 Album image #58](/albums/img/8/8/2/927882-28369-81-720.jpg)
and the final result.
![Album image #59 Album image #59](/albums/img/8/8/3/927883-28369-13-720.jpg)
![Album image #60 Album image #60](/albums/img/8/8/4/927884-28369-22-720.jpg)
lower front section with seats in place
![Album image #61 Album image #61](/albums/img/8/8/5/927885-28369-33-720.jpg)
instrument panel glued on one of the fuselage halve
![Album image #62 Album image #62](/albums/img/8/8/6/927886-28369-71-720.jpg)
added harness for pilot seat
![Album image #63 Album image #63](/albums/img/8/8/7/927887-28369-96-720.jpg)
and front lower section glued to the right halve of the fuselage
![Album image #64 Album image #64](/albums/img/8/8/8/927888-28369-24-720.jpg)
few hours later, fuselage is glued together. Fit was again, perfect.
![Album image #65 Album image #65](/albums/img/8/8/9/927889-28369-35-720.jpg)
had to try and test fit the canopy piec on the front and end...
![Album image #66 Album image #66](/albums/img/8/9/0/927890-28369-84-720.jpg)
and again, perfect fit.
![Album image #67 Album image #67](/albums/img/0/8/8/946088-28369-63-720.jpg)
starting on the engine
![Album image #68 Album image #68](/albums/img/0/8/9/946089-28369-53-720.jpg)
front parts ready for paint
![Album image #69 Album image #69](/albums/img/0/9/0/946090-28369-78-720.jpg)
painted, added wiring (thin lead wire) and glued front parts
![Album image #70 Album image #70](/albums/img/0/9/1/946091-28369-70-720.jpg)
small test fit with the engine cowling
![Album image #71 Album image #71](/albums/img/0/9/2/946092-28369-86-720.jpg)
primer coat at least
![Album image #72 Album image #72](/albums/img/0/9/3/946093-28369-19-720.jpg)
![Album image #73 Album image #73](/albums/img/0/9/4/946094-28369-77-720.jpg)
a little bit of pre-shading
![Album image #74 Album image #74](/albums/img/0/9/5/946095-28369-63-720.jpg)
MRP-239 Blue [FS35190] for the underside surfaces
![Album image #75 Album image #75](/albums/img/0/9/6/946096-28369-25-720.jpg)
MRP-101 Dark Green [FS34079] as a first of the two-tone camo (Green-black)
![Album image #76 Album image #76](/albums/img/0/9/7/946097-28369-71-720.jpg)
MRP-173 Tyre-Rubber for the second color.
![Album image #77 Album image #77](/albums/img/0/9/8/946098-28369-47-720.jpg)
![Album image #78 Album image #78](/albums/img/0/9/9/946099-28369-65-720.jpg)
looking good
![Album image #79 Album image #79](/albums/img/1/0/0/946100-28369-62-720.jpg)
so far only wing and engine cowling painted with the black. Fuselage will be next.
![Album image #80 Album image #80](/albums/img/4/2/9/946429-28369-36-720.jpg)
fuselage masked with MRP masking putty
![Album image #81 Album image #81](/albums/img/4/3/0/946430-28369-23-720.jpg)
![Album image #82 Album image #82](/albums/img/4/3/1/946431-28369-61-720.jpg)
sprayed MRP Tyre-rubber
![Album image #83 Album image #83](/albums/img/4/3/2/946432-28369-72-720.jpg)
![Album image #84 Album image #84](/albums/img/4/3/3/946433-28369-53-720.jpg)
unmasked
![Album image #85 Album image #85](/albums/img/4/3/4/946434-28369-37-720.jpg)
![Album image #86 Album image #86](/albums/img/4/3/5/946435-28369-74-720.jpg)
and again - dry test fit
![Album image #87 Album image #87](/albums/img/4/3/6/946436-28369-74-720.jpg)
![Album image #88 Album image #88](/albums/img/4/3/7/946437-28369-70-720.jpg)
and with engine cowling. Loving the camo!
![Album image #89 Album image #89](/albums/img/7/5/7/947757-28369-33-720.jpg)
sprayed 2 coats of Mr. Color levelling thinner (just the thinner) over the whole model to smooth the surface a little bit and to get the black spots closer to satin finish
![Album image #90 Album image #90](/albums/img/7/5/9/947759-28369-69-720.jpg)
I think it is looking much better
![Album image #91 Album image #91](/albums/img/7/5/8/947758-28369-14-720.jpg)
after 2 hours of drying, decals are placed. Only 4 big red stars (2 for fuselage and 2 on the underside of the wings)
![Album image #92 Album image #92](/albums/img/7/6/2/947762-28369-89-720.jpg)
and one small tiny star on the front nose
![Album image #93 Album image #93](/albums/img/7/6/0/947760-28369-37-720.jpg)
floaters starting to get the paint job done
![Album image #94 Album image #94](/albums/img/7/6/1/947761-28369-51-720.jpg)
and also propeller finished. Will spray the whole thing with one or two coats of levelling thinner as well.
![Album image #95 Album image #95](/albums/img/0/6/9/956069-28369-97-720.jpg)
Aaaaaaand, it's done! 😄
![Album image #96 Album image #96](/albums/img/0/7/0/956070-28369-12-720.jpg)
![Album image #97 Album image #97](/albums/img/0/7/1/956071-28369-74-720.jpg)
![Album image #98 Album image #98](/albums/img/0/7/2/956072-28369-88-720.jpg)
![Album image #99 Album image #99](/albums/img/0/7/3/956073-28369-69-720.jpg)
![Album image #100 Album image #100](/albums/img/0/7/4/956074-28369-48-720.jpg)
![Album image #101 Album image #101](/albums/img/0/7/5/956075-28369-29-720.jpg)
![Album image #102 Album image #102](/albums/img/0/7/6/956076-28369-61-720.jpg)
![Album image #103 Album image #103](/albums/img/0/7/7/956077-28369-81-720.jpg)
![Album image #104 Album image #104](/albums/img/0/7/8/956078-28369-59-720.jpg)
![Album image #105 Album image #105](/albums/img/0/7/9/956079-28369-85-720.jpg)
![Album image #106 Album image #106](/albums/img/0/8/0/956080-28369-61-720.jpg)
![Album image #107 Album image #107](/albums/img/0/8/1/956081-28369-64-720.jpg)
![Album image #108 Album image #108](/albums/img/0/8/2/956082-28369-77-720.jpg)
![Album image #109 Album image #109](/albums/img/0/8/3/956083-28369-45-720.jpg)
![Album image #110 Album image #110](/albums/img/0/8/4/956084-28369-65-720.jpg)
![Album image #111 Album image #111](/albums/img/0/8/5/956085-28369-83-720.jpg)
![Album image #112 Album image #112](/albums/img/0/8/6/956086-28369-16-720.jpg)
Commentaires
26 July 2024, 23:37 -