B-45A Tornado
Commentaires
4 27 October 2017, 08:33
![](/profiles/img/10148-258-s.jpg)
Started! Here are the first impressions of Valoms B-45 Tornado. Parts are very short run-style but fit is proper and detailing seems sufficient. The fuselage length is quite big- I am happy! 🙂
27 October 2017, 08:37
![](/profiles/img/11266-s.jpg)
I'm looking forward to see another not so well known model from you. Keep on glueing Roland!
27 October 2017, 14:48
![](/profiles/img/10148-258-s.jpg)
Welcome, Ekki!
The fuselage has been closed up- here are pictures of the interior now enclosed....
Fit is ....mediocre as far as I can see now. A lot of glue has been invested in joining these two fuselage half's 🙂
29 October 2017, 20:54
![](/profiles/img/10148-258-s.jpg)
The Valom-kit shows some sink marks on rather obvious places. Those marks and the -overall- mediocre fit will cause some serious filling and sanding.
But the evolving shapes are nice, at all.
1 November 2017, 15:54
![](/profiles/img/10148-258-s.jpg)
Wings, tailplane and fuselage have been joined- and filling and sanding is done in most areas.....
It will not take a long and I can apply the primer for the Alclad-metal colors 🙂
4 November 2017, 20:04
![](/profiles/img/10148-258-s.jpg)
Here are the last two building steps: painting the canopies ans the white fin-tips in one step, followed by priming all surfaces with Gunzes "H-77".
Next will be applying the first metallic shades with Alclad.
11 November 2017, 18:35
![](/profiles/img/15045-984-s.jpg)
Oh,great! One of the first jet bombers. I never thought that someone make a good kit of it. I will follow Your build! Good work so far!
11 November 2017, 20:07
![](/profiles/img/13136-468-s.jpg)
Wow! Your skill to improve some so-so kits never ceases to amaze me, Roland! Fantastic job fixing the nacelles. Looking forward ti seeing more of this one!
12 November 2017, 00:23
![](/profiles/img/10148-258-s.jpg)
Thank you Gabor and Gordon! Your comments are quite encouraging 🙂!
12 November 2017, 08:53
![](/profiles/img/10148-258-s.jpg)
The first session of masking and spraying on several Alclad shades of metal has been done. It will take a few more steps to have built up the impression it will look finished.
15 November 2017, 16:14
![](/profiles/img/10148-258-s.jpg)
The paint work with Alclad is done at last- an a coat of glossy clear from Gunze has sealed the surface and prepares a base for the decals. These will come next!
18 November 2017, 19:41
![](/profiles/img/21997-347-s.jpg)
Nice metal painting! And thank you for make me aware of this American "Tornado" a/c. Until now I knew only the Panavia one 🙂
19 November 2017, 14:50
![](/profiles/img/10148-258-s.jpg)
Being complimented for metal painting by a champion like you is quite honorific! Thank you for this!
And yes- I did not know the Fifties-Tornado either before I stumbled over this Valom kit 🙂
20 November 2017, 17:35
![](/profiles/img/21997-347-s.jpg)
Roland, keep the ball flat 🙂 I like to use Alclad, but in general I tend to put to much color on my models. So this can't happen with real alu, so you can say I have used it to avoid painting😎
20 November 2017, 19:50
![](/profiles/img/10148-258-s.jpg)
That a lucky outcome avoiding metal paintwork! 🙂
Thank you all three for your comments!
21 November 2017, 09:27
![](/profiles/img/10148-258-s.jpg)
Not much left to do! Essentially there a lot of antennas waiting to be fitted- and some cyanacrylate glue will make a pretty glazing of the position lights-so I hope 🙂
24 November 2017, 18:47
![](/profiles/img/10148-258-s.jpg)
The B-45A is finished! The last touches and final paintings showed no challenges, so the completion of this noteworthy Valom-kit was done rather quickly.
This is a very fine kit with a few issues- and this does refer rather to the manual and not to the kit parts. The decals, however, proved to be quite tricky.
I hope you like the pictures- I am quite glad to got this Alu-sparkling project done! 🙂
Thank you for all your interest and helpful comments!
25 November 2017, 18:58
![](/profiles/img/21997-347-s.jpg)
Roland, this is really nice work - but on the final pictures you forget to unmask the windows of the tail gunner 🙂
25 November 2017, 19:33
![](/profiles/img/10148-258-s.jpg)
Hello mates, thank you all for these kind replays!
Now on to the B-47, the next to be finished!
26 November 2017, 09:57
![](/profiles/img/15122-902-s.jpg)
Wonderful Build Roland - you show me aircrafts I have never seen before!
26 November 2017, 10:47
![](/profiles/img/10148-258-s.jpg)
Thank you all for your wonderful comments! I feel ....motivated!
26 November 2017, 19:32
![](/profiles/img/16661-726-s.jpg)
Beautiful result Roland ! I really like these early jetage planes and you made this one look phantastic with its courful livery and excellent NMF !
29 November 2017, 21:08
![](/profiles/img/10148-258-s.jpg)
Thank you all for your motivating comments and your interest!
2 December 2017, 12:46