[Tamiya] Porsche 911 GT1 "Hutchison Telecom" -WIP
1January 15, 2024Washed and refined body color parts.
2January 15, 2024The rear cowl and hip parts were split, so I removed the attaching lines.
3January 15, 2024But it is splitted. 🙁
4January 15, 2024I was forced to carve the parting-line again.
5January 15, 2024To fit the tail lamp body, I fixed it with a tape and put it in the dryer for a day.
6January 15, 2024I painted it black surfacer to prevent light from penetrating.
7January 15, 2024and put a white surfacer over it...
8January 15, 2024and I painted gloss white.
9January 15, 2024I was suspicious of the condition of the decal.
I tested it with a piece and it was shattered.
10January 15, 2024Tested Liquid Decal Film.
11January 15, 2024Coated.
12January 15, 2024I put cutting line.
13January 15, 2024Attached the line decals. (and clear-coated)
14January 15, 2024Masked and I will paint dark blue.
15January 15, 2024and mask again. then painted black color.
16January 15, 2024Painted other remaining parts.
17January 15, 2024unmasked.
18January 15, 2024I really hate this result.
19January 15, 2024Fixed it.
20January 15, 2024Attached all remaining decals
21January 15, 2024Clear-coated.
22February 6, 2024Sanded.
23February 6, 2024Polished.
24February 6, 2024Painted windows frame.
25February 6, 2024Painted with panel line accent.
26February 6, 2024Painted with paint brush.
This kit has many partial paint points.
27February 6, 2024Ready to assemble.
28February 6, 2024I followed the instructions and started assembling.
29February 6, 2024There were a lot of parts to paint, which was a hassle, but it looks great once it's assembled.
30February 6, 2024The parts fit very well with no gaps.
31February 6, 2024The basic decals in the kit were cracked due to not using liquid decal film.
32February 6, 2024Fortunately, the tire decals were in good condition.
33February 6, 2024Assembled inner and under parts.
34February 6, 2024Assembled inner and under parts.
35February 6, 2024Attached wing and tail lamp.
36February 6, 2024Attatched wind shield.
37February 6, 2024Attached inner lamp of front.
38February 6, 2024Attached exterior parts.
39February 6, 2024Applied fastner.
40February 6, 2024Applied metal antenna and revet.
41February 6, 2024Completed.
42February 6, 2024Thanks for watching... 🙂
Commentaires
26 February 2025, 09:11 -
Album info
FHD images here...
Part 1/2 - motorart.tistory.com/736
Part 2/2 - motorart.tistory.com/737
