USS BATAAN (LHD-5)

1
January 19, 2022
140920: LHD-5 in the box.
2
January 19, 2022
140920: LHD-5 in the box.
3
January 19, 2022
140921: LHD-5 well deck and upper vehicle deck bulkheads. Not sure why they bothered with the upper V interior - you can't see it!
4
January 19, 2022
140922: LHD-5 fit test alongside her sister (LPD-21 by Cyber-Dragon). I just noticed the visiting aircraft on the pointy end!
5
January 19, 2022
140922: LHD-5 well deck and upper V. Fit is excellent.
6
January 19, 2022
141017: LHD-5 Airwing trial.
7
January 19, 2022
141017: LHD-5 Airwing trial. The MV-22 are visiting from the Dragon LPD-21 kit,
8
January 19, 2022
141022: LHD-5 Well deck markings. These are not included in the kit, but are an easy add-on from cut white decal film.
9
January 19, 2022
141022: LHD-5 Well deck markings. These are not included in the kit, but are an easy add-on from cut white decal film.
10
January 19, 2022
141129: LHD-5 hull mating. Fit could be better here, but not hard to fix. Note detail on anchor hawsepipes, shell bitts, and drain discharge piping.
11
January 19, 2022
141129: LHD-5 hull mating. Fit could be better here, but not hard to fix. Note detail on anchor hawsepipes, shell bitts, and drain discharge piping.
12
January 19, 2022
141129: LHD-5 hull mating. Nuts are secured with 5-min epoxy.
13
January 19, 2022
141129: LHD-5 hull mating. Fit could be better here, but not hard to fix. Note detail on anchor hawsepipes, shell bitts, and drain discharge piping.
14
January 19, 2022
141129: LHD-5 hull mating. Pretty tight fit on well deck bottom.
15
January 19, 2022
141129: LHD-5 hull mating. Had to cut the stringers to get the upper V deck to fit properly.
16
January 19, 2022
141129: LHD-5 hull mating. Secured for welding.
17
January 19, 2022
141129: LHD-5 nose job. I inserted a wedge of white sheet styrene to fill the gap on the stem between red and grey.
18
January 19, 2022
141203 LHD-5 hull painting. Haze grey (Testors Acryl Neutral Grey FS26270) is already applied, and top of boot topping masked to receive flat black from rattlecan.
19
January 19, 2022
141205 LHD-5 hull painting. Masking the boot topping.
20
January 19, 2022
141205 LHD-5 hull painting. Ready for hull red (Rattlecan red lead primer).
21
January 19, 2022
141205 LHD-5 hull painting. Unmasking is always my favorite task!
22
January 19, 2022
141205 LHD-5 hull painting. Quick job with basic tools and paints.
23
January 19, 2022
141205 LHD-5 hull painting. Quick job with basic tools and paints.
24
January 19, 2022
150215: LHD-5 Decal application. Decals are very good and fit perfectly. But there are lots and lots!
25
January 19, 2022
150215: LHD-5 Decal application. Decals are very good and fit perfectly. But there are lots and lots!
26
January 19, 2022
150626 LHD-5 Hull outfitting.
27
January 19, 2022
150915: Starting on the PE catwalks and troop walkways (included in the kit).
28
January 19, 2022
150915: Starting on the PE catwalks and troop walkways (included in the kit).
29
January 19, 2022
150915: Starting on the PE catwalks and troop walkways (included in the kit).
30
January 19, 2022
150915: LHD-5 progress shot. Detail is very good!
31
January 19, 2022
150915: One of the two-piece PE catwalk/troop walkway assemblies. Tried soldering but wound up applying too much heat and distorted the parts. Had to de-solder, flatten, repeat, etc.
32
January 19, 2022
150918: LHD-5 WSC-6 antenna platforms (P&S).
33
January 19, 2022
150918: LHD-5 Aircraft Elevator platform detail. Fit is excellent.
34
January 19, 2022
150920: LHD-5 Progress.
35
January 19, 2022
150920: LHD-5 Progress.
36
January 19, 2022
150922: Trying to represent the panel detail on the WSC-6 domes.
37
January 19, 2022
150925: LHD-5 Aircraft hangar. Nice detail, but you won;t be able to see a thing! Kit aircraft.
38
January 19, 2022
150925: LHD-5 Aircraft Hangar and Upper Vehicle Storage.. Nice detail, but you won;t be able to see a thing! Kit vehicles.
39
January 19, 2022
150925: LHD-5 before closing up the hull.
40
January 19, 2022
151013: Kit provides both plastic and PE options for the SPS-48E antenna.
41
January 19, 2022
151013: Kit provides both plastic and PE options for the SPS-48E antenna.
42
January 19, 2022
151013: Kit provides both plastic and PE options for the SPS-48E antenna.
43
January 19, 2022
151021: MV-22 production line. Kit includes 4 V-22s; I added a six-pack. Two on extreme right are from Dragon LPD-17.
44
January 19, 2022
151021: MV-22 production line. Trumpeter and Dragon MV-22s are very compatible.
45
January 19, 2022
151106: Kit provides both plastic and PE options for the SPS-49 antenna.
46
January 19, 2022
151106: Bending the SPS-49 antenna's boom.
47
January 19, 2022
151108: LHD-5 progress shot.
48
January 19, 2022
151108: LHD-5 progress shot. Note the RAS delivery hose (fine solder on three eyelets from twisted copper wire).
49
January 19, 2022
151108: LHD-5 progress shot. Note the RAS delivery hose (fine solder on three eyelets from twisted copper wire).
50
January 19, 2022
151108: LHD-5 progress shot.
51
January 19, 2022
151110: LHD-5 progress shot. Note PE on SPS-49 antenna.
52
January 19, 2022
151110: LHD-5 progress shot. Stern gate and hydraulic operating arms are a surprisingly good fit.
53
January 19, 2022
160226: LHD-5 progress shot with airwing onboard. Note visiting CH-46 (MV-22 replaced the 46's).
54
January 19, 2022
160226: LHD-5 progress shot with airwing onboard. Note visiting CH-46 (MV-22 replaced the 46's).
55
January 19, 2022
160307: LHD-5 progress shot with airwing onboard. Aircraft are secured with a tiny drop of PVA glue on the main mounts.
56
January 19, 2022
160307: LHD-5 progress shot with airwing onboard. Aircraft are secured with a tiny drop of PVA glue on the main mounts.
57
January 19, 2022
160307: LHD-5 progress shot with airwing onboard. Aircraft are secured with a tiny drop of PVA glue on the main mounts.
58
January 19, 2022
160307: LHD-5 progress shot.
59
January 19, 2022
160307: LHD-5 complete, airwing aboard.
60
January 19, 2022
160307: LHD-5 complete, airwing aboard.
61
January 19, 2022
160307: LHD-5 complete, airwing aboard.
62
January 19, 2022
160307: LHD-5 complete, airwing aboard.
63
March 24, 2023
181014: Convenient prototype reference at NNSY.

Comentarios

36 19 January 2022, 23:22

Rui S
Another beauty 👍

22 January 2022, 18:39

Guy Rump
Beautiful build. 👍

24 March 2023, 07:33

Neuling
Impressive work!

24 March 2023, 09:45

Tyson Tu
Nice work and I love your reference materials 😀 I started my Hobbyboss Kearsarge, but opted to shelve it when I discovered that I needed a bigger anti-feline display case than I currently have available…

24 March 2023, 11:15

Andrew P
Yeah, I try to build the case as soon as major construction begins. Sooner when I get a kitty cat, I suppose.
🙂

24 March 2023, 12:43

Treehugger
Nice.
Q: What is the quality of the main carrier deck? I see some are offering a full plated deck with photo etch, but if the deck on your kit is as nice and crisp as the Trumpeter Nimitz 1:700 carrier deck, then I can't imagine one would want a photo etched deck.

24 March 2023, 13:21

Dave Flitton
I like!!!

24 March 2023, 20:53

Andrew P
Treehugger: The detail on the deck is excellent and the entire assembly fit like a glove. I don't think an aftermarket deck is needed, and may be more trouble than it's worth.

25 March 2023, 02:06

Treehugger
I can also imagine how the packaging and shipping of such one-deck-PE might be a nightmare so to speak, easily bent and dented. I wonder what the packaging looks like for the BigBlueBoy set. Though, it makes sense that they would want to make larger PE with a thicker material perhaps.

25 March 2023, 05:23

Album info

USS BATAAN (LHD-5) in 1/700 by Hobby Boss.

USS Bataan (LHD-5)

63 imágenes

1:700

Terminado

Todos los álbumes

Ver todos los álbumes »