Lighthouse Bunthäuser Spitze (Hamburg) - completed

1
November 15, 2017
The first task completed. Windows will be mounted after painting.
2
November 15, 2017
3
November 15, 2017
A lot of Parts!
4
November 15, 2017
5
November 15, 2017
6
November 18, 2017
7
November 18, 2017
8
July 2, 2018
9
July 2, 2018
10
July 2, 2018
11
January 14, 2022
After 3,5 years (!!!!) of pausing I reactivated my second lighthouse project. Steps in place on one side of the stairs.
12
January 14, 2022
You need for paper white glue because the other glues (CA, welder or plastic glue) not works.
13
January 14, 2022
14
January 15, 2022
Housing of the light. I decided to use ONE long bended transparent stripe instead of 8 sole pieces. Framing is of paper (kit part), painted white.
15
January 15, 2022
Base of the housing in place. Roof coming soon.
16
January 15, 2022
17
January 16, 2022
Illumination for the Lighthouse.
18
January 16, 2022
Two red and two white SMD LED‘s soldered to an array together.
19
January 16, 2022
I had to rework the circuit because I found that the 4017 could not provide enough current. Two BC-237 as amplifiers helps...
20
January 16, 2022
Each part of the superstructure has an inner x-shaped core. Because of that you have to watch out where you drill the holes for the wires. Every part has a special alignment: f.e. The red access door is on the right of the main door.
21
January 16, 2022
22
January 16, 2022
23
January 16, 2022
Enlarged opening in the floor of the light housing for fit with the LED’s.
24
January 16, 2022
Handrail: for better strength I drilled flat holes in the base (increasing of contact surface).
25
January 17, 2022
26
January 17, 2022
Completed electronic. I added furthermore two parts and realized current sources for both LED circuits. So is the current for both circuits independent from the battery voltage. 🙂
27
January 17, 2022
Lights off.
28
January 17, 2022
White pulse “long”.
29
January 17, 2022
One of the 3 short pulses in red. Unfortunately I found no exact information about the original pulse configuration during service… („Künstlerische Freiheit“🙂)
30
January 21, 2022
A piece of 40 mm bambus wood prepared for installation of the little board and 9V battery.
31
January 21, 2022
32
January 21, 2022
33
January 21, 2022
34
January 21, 2022
35
January 22, 2022
Result of the first round of „scenery construction“. Will be continued.
36
January 22, 2022
37
January 22, 2022
Result after the second round…
38
January 22, 2022
39
January 22, 2022
40
January 22, 2022
41
January 24, 2022
42
January 24, 2022
43
January 24, 2022
Red light „1 of 3 short“
44
January 24, 2022
45
January 24, 2022
White light „long“
46
January 24, 2022
47
January 24, 2022
48
January 24, 2022
49
January 24, 2022
50
January 24, 2022
51
January 24, 2022

Comentarios

27 15 November 2017, 20:22

Łukasz Gliński
This I have to watch 🙂

18 November 2017, 21:36

ISA Models
Looking very good! 🙂

18 November 2017, 21:41

Bernhard Schrock
Thank you Łukasz and Blaubar (Blaubär?)🙂
The kit is designed extraordinary. The original structure of the walls (6) consists 31 rows of wooden overlapped mounted panels. The kit provides a lot of small laser cut parts for each side. In the case of three sides you have to glue 31 rows. In the case of the three other sides with the door and windows they are more than 40 parts per side.... A lot of work!!!!

19 November 2017, 13:59

bughunter
Yes, a lot of work - but that single plank brings a lot of realism! 👍 Nice to see the next lighthouse!

19 November 2017, 14:46

ISA Models
Very nice project indeed. Thanks for your input. Well, I tend to ignore Umlaute online so I demoted the Blaubär to a Blaubar, it makes it easier for our international folks.

21 November 2017, 07:41

Gordon Sørensen
Individual planks? Wow! Great work, Bernhard!

3 July 2018, 10:14

Łukasz Gliński
Yikes, you're back to it! 👍

3 July 2018, 11:04

Bernhard Schrock
Yep: individual planks (a lot of them

3 July 2018, 18:30

Daniel
Moin Bernhard,
das Türmchen steht hier bei mir in Hamburg Wilhelmsburg. Soll ich am Wochenende mal ein paar
Walkaround Fotos machen?

3 July 2018, 18:55

Bernhard Schrock
Ja ja ja ja!🙂

3 July 2018, 19:21

Daniel
Geht klar. 😉

3 July 2018, 20:02

Hanno Kleinecke
Ohoo, schön dass es hier weitergeht. Dann lass mal ein Licht angehen ! 😄

14 January 2022, 21:50

Łukasz Gliński
Oh, I have to repeat myself 😉

14 January 2022, 22:14

Villiers de Vos
A highly unusual subject coming along nicely. I am following with interest.

15 January 2022, 06:40

Robert Podkoński
Interesting (and surprising topic 😉 )

15 January 2022, 11:22

Lex Jassies
Hi Bernard, I love this kind of kits.
Did some wooden Craftman kits myself in 1:87 when I also was (American) Railroading. I found it always very rewarding. Planning to put in a light?

15 January 2022, 13:51

Bernhard Schrock
Sometimes the modeler needs a change to the rotors and propellers! I am pleased that you are also interested in this topic.
Lex: So far I haven't thought about the illumination but I think your idea is excellent!!🙂
I just put together the right electronic components in the basement.🙂

16 January 2022, 10:37

David Taylor
Very different for you Bernhard,totally agree though.

16 January 2022, 12:20

Hanno Kleinecke
Let there be light ! This will be cool …..😄

16 January 2022, 13:24

Ben M
Looking forward to the video of the light… I saw some plans recently for 3d printable 1:160 lighthouses that even had tiny transparent fresnel lenses.

16 January 2022, 22:11

bughunter
Es werde Licht!

17 January 2022, 06:13

Lex Jassies
Would be nice if it had the same blinking rate as the real thing 😉

17 January 2022, 08:15

Bas Tonn
Following.. no idea where this is going, but I like it...

17 January 2022, 12:41

Bernhard Schrock
Und es wurde Licht…
Yesterday I managed the small etched board and soldered all parts. It works! Vis adjustable resistor it's possible to adjust the blinking frequency.

18 January 2022, 06:44

Dietmar Bogatzki
Sehr schön, mal was anderes, so ein Leuchtturm 👍

18 January 2022, 07:44

Villiers de Vos
Very nice.

18 January 2022, 13:16

Hanno Kleinecke
What a beautiful picturesque little scenery, the landscape complements the lighthouse perfectly, as it depicts
very realisticly the local vegetation at the Elbe riverbank in the vicinity of the german north sea coast.
Looks like summer ! 😄

24 January 2022, 20:14

David Taylor
Smart.

24 January 2022, 21:07

Ben M
Oh this looks just great!

24 January 2022, 23:57

Villiers de Vos
Very nice.

25 January 2022, 08:48

Łukasz Gliński
That escalated quickly! 😮 Wonderful result 👍

25 January 2022, 08:58

Neuling
Beautiful! This lighthouse leads the way in modelling .......

25 January 2022, 10:43

Lex Jassies
Concrats Bernhard.......that's a very nice and picturesque diorama you have there 🙂
I looked at photo's of the real thing and I think you've nailed it. In real it's much smaller than I thought. Nice landmark.

25 January 2022, 10:58

bughunter
There are already pictures of your model on the internet! Here fro example:
[img1]

25 January 2022, 17:56

Bernhard Schrock
I read your comments with great pleasure gentlemen! Cardboard, paper and woodland scenic are so different in handling but if is so much fun! As a contrast the next project will need only rock, stones and maybe water…. Let's see how that works. 🙂

26 January 2022, 20:02

Bernhard Schrock
Hello mates: today we have made the promised video. Enjoy!🙂
Youtube Video