Thunderjet comparative build

1
March 24, 2023
Hobby Boss , started , easy to build and nice details , recessed panel lines
2
March 24, 2023
Just a little putty required , details in de UC bay
3
March 24, 2023
Heller , showing his age (1978) raised panel lines

I lost the canopy, so I will have to use the canopy of the Mistercraft kit
4
March 24, 2023
Mistercraft, not a copy of Heller, very basic, but the fuselage has recessed panel lines. I might combine this with the Heller kit. The same sprues can be found in "Plastyk" kit , in the "Gomix" kit
5
March 24, 2023
Mistercraft wings : no panel lines at all. The instructions in the kit do not fit the parts list and appear to be partially and shamelessly copied from Tamiya
6
March 24, 2023
Tamiya : has the reputation to be the best kit
7
March 24, 2023
Tamiya wing sprues : nice details in the UC bay
8
March 28, 2023
Pilot seat : 4 parts in the Tamiya kit, more basic in the others.
9
March 28, 2023
Cockpit interior : similar differences
10
March 28, 2023
Fuselage : The Heller kit has raised panels, Minicraft has recessed panel lines. I will build a hybrid model, combining the Minicraft fuselage parts with the better parts of Heller
11
March 28, 2023
Undercarriage : Tamiya detailed, Hobby Boss is OK, Minicraft is for the bin, except that I will use the wheels as those of Heller are too small
12
March 30, 2023
The cockpit , Tamiya : detailed, HB : I enhanced the pilot seat with some bits to make look like the TM seat; MC/H : seat made of HB spare and Heller headrest, a few details added on the panels; The Tamiya has a decal for the safety belts, but it looks "flat". I will add PE belts later in the 3 kits
13
March 31, 2023
U/C construction: Heller wheels too small / MC main wheels mofied, spare box front wheel; Hobby Boss : just a small correction , Tamiya : from the kit. I added a "hydraulicline" on all 3 with some Alu wire .
14
April 2, 2023
weight added under cockpitfloor in Tamiya and Helleer/MC . Hobbyboss has a solid fuselage
15
April 2, 2023
No real issues in the assembly : Mcraft nose had to be squeezed to fit to Heller nose ring; a few details enhanced on the Heller/MC and Hobbyboss ( exhaust made finer):
just a little Vallejo putty at some joints on all 3 kits. Canopies temporarily fitted and protected by liquid mask. Ready for the primer.
16
April 2, 2023
3 ladies in black
17
April 3, 2023
Previous built Hobbyboss F84E : I will try an upgrade (e.g. replacing the old decals)
18
April 3, 2023
Previous built Heller F84F : to be upgraded too
19
April 6, 2023
I removed the paint and decals of these two older builds with AK 186 paint stripper
20
April 12, 2023
All 5 models got the same treatment: black primer (AK) a top coat of Tamiya flat aluminium (lighter shade) and a bottom coat of a mix of AK gloss alumnium with AK gun metal (darker shade. Next step : sealing with Klear and a Panel wash
21
April 13, 2023
top and bottom of Hobbyboss models after wash with Tamiya panel liner and clean up with a paper towel with a bit of whitesprit.
22
April 13, 2023
The canopies : the MC windscreen is horrible, but I found a replacement in my spare box
23
April 19, 2023
Tamiya has a piece for (hydraulic? ) equipment in the canopy , Heller and MC too, but Hobbyboss lacks this piece. I used the MC part in the Hobbyboss build, otherwise it could be scratchbuilt. There is also a HUD (3parts) in the Tamiya kit, the others will need a lookalike with transparent sheet, hardly visible with a closed canopy.
24
August 25, 2023
home made decals for BAF thunderjet florennes & bierset (here in B/W) stropdecal
25
August 25, 2023
home made decals for BAF thunderjet kleine brogel (here in B/W) stropdecal
26
June 29, 2024
This is the Heller kit Thunderjet 3sqn Florennes with new decals
27
June 29, 2024
Right side
28
June 29, 2024
F84G Thunderjet 27 sqn Kleine Brogel, this is a Hobbyboss kit
29
June 29, 2024
rear View
30
June 29, 2024
right side view of the Tamiya kit
31
June 29, 2024
This iq the Tamiya kit with stropdecal for Kleine Brogel 31 sqn
32
June 29, 2024
This is the Hobbyboss kit with stropdecal
33
June 29, 2024
34
June 29, 2024
26 sqn in Bierset
35
June 29, 2024
This is the Polish scrap fuselage with Heller wings for 26 sqn at Bierset with stropdecal

Kommentare

39 24 March 2023, 10:24

Jan Peters
Cool subject for a comparison build, will follow this 👀
I have the Tamiya kit in my stash, to build a Dutch version of course.
I had the Heller kit too, but felt it was too much work to bring it up to modern standards.
Looking forward to your progress Erik 👍🏻

24 March 2023, 10:39

Maciej Bellos
Watching!

24 March 2023, 13:18

Dave Flitton
Watching

24 March 2023, 21:06

Bernd Grün
Following!

29 March 2023, 12:33

Łukasz Gliński
Joining y'all here.
Erik, I think the Inplast/MrCrap is reverse-engineered copy actually. It appeared in the times when buying molds or production batches was too expensive for us down here. So they reverse-designed the new molds and use them since then (e g.my SR-53 and vacu Airacobra share identical origin)

29 March 2023, 21:46

Erik De Smet
Lukasz, The Heller kit is the original, with raised panel lines showing its age. Inplast made a "Polish" copy based on it with the same parts lay-out , but probably for a smaller injection machines. The recessed panel lines on the fuselage are good, all other parts are less than the original. I just bought one kit for a bargain price as I lost the canopy of my Heller kit. All other Polish and Czech versions of this kit appear to come from the same moulds with other decals .

30 March 2023, 15:02

Andy Ball
Ambitious and informative- like it!

2 April 2023, 18:42

Erik De Smet
I had two older moldels (Heller and Hobbyboss) in my collection , and I stripped the decals and paint with AK paint stripper. I am quite impressed by the quality of this product : easy to apply with a brush, paint and decals get loose within minutes and can be wiped of with a paper towel and no agression of the plastic, even on the canopy.

6 April 2023, 13:01

Jan Peters
This is becoming quite a collection of thunderjets Erik 👍🏻

6 April 2023, 13:43

Carlo
Excellent work on presenting the variability of kits, well done. You have convinced me to do my Thunder Streak/Jet/Flash kits(Testors/HobbyBoss/Sword) all at the same time when it's their turn.

6 April 2023, 15:07

Erik De Smet
My decal design shows some errors, mainly on the serial numbers and the KB tail colors, so I can only finish this with a reprint of the decals.

19 April 2023, 15:08