MyAlbum
Kommentare
10 23 October 2016, 16:01
Roland SachsenhoferHere are the first pictures of this challenging project.
General fit is good- nevertheless you have to work a lot with superglue: half of the interior consists of resin or etched parts.
Construction sheet is a little bit confused....
23 October 2016, 16:07
Roland SachsenhoferThank you all for your interest and commenting!
Tja, Holger, dem Inschenör is nix zu schwör...... 🙂
You can see he current state of the build, The openings for holes for the wirings have been set, as you can see on the second picture.
ext step will be gluing the upper wing and attaching the struts plus wiring- this will be done by etched parts from R+B production, simulating the aerodynamic profiles of this types wiring.
29 October 2016, 20:28
Stefan FraundorferEin neues interessantes Projekt - ich bin dabei.
"Tja, Holger, dem Inschenör is nix zu schwör......" - versteht das unser norddeutscher Freund überhaupt?
Liebe Grüße - auch an dich, Holger.
31 October 2016, 17:24
Roland SachsenhoferHallo Stefan, das freut mich aber!
Ich hoffe doch 🙂
You can see my attempts to rig this beauty- R+B steel wiring have been inserted into the openings prepared on the lower wings -and then tightened till the Cyanacrylat-glue had dried.
Now on to floats and engine!
1 November 2016, 06:24
Holger Kranich"Tja, Holger, dem Inschenör is nix zu schwör......"
Das war doch Norddeutsch!?😉
Groetjes, Euch beiden!
1 November 2016, 08:54
Roland SachsenhoferThank you for your comments!
I hope I will not disappoint 🙂
2 November 2016, 08:17
Roland SachsenhoferSome more pictures of my gloss black painted Ro.43: Next step will see it having got Alclad "White Aluminum" on the surfaces.
15 November 2016, 18:10
Spanjaardlooking good, but if i can give a suggestion, i would press a little those belts against the seat... right now they look like they are holding a ghost invisible pilot😉 other than that, it is going really nice. rigging specially is really nice
19 November 2016, 17:14
Roland SachsenhoferHi mates, thank you all for your very kind comments!
I got all the colors on the surfaces- Alclad White Aluminum for the "silver paint"- and I managed to apply the superb decals. These have been a pure joy to use, so even the red stripes have been made with Cartographs help.
Next step will see the gloss clear coat for the decals toned down a little bit. Having done this, engine, floats and so on can be attached.
Spanjaard, thank you for your suggestion about the "blown" seatbelts. I for myself was extremely uncertain about the real appearance of Italian-style belts with all its strange arrangement of belts and chains..... What you can see on the models seats is my interpretation of Special Hobbies instructions.
Does anybody know, how the real thing did look alike- any help will be appreciated!
20 November 2016, 19:45
Erik LeijdensLooking very good! The seatbelts look like the belts on the Maxicosi in my car for my daughter 😄
Great work with the rigging, looks very good👍
20 November 2016, 21:11
Roland SachsenhoferThank you guys! Maxicosi is a funny and appropriate suggestion 🙂
21 November 2016, 15:04
Bernhard SchrockMal wieder ein Schmankerl! Interessant deine (ganz andere als meine) Bauweise zu sehen: alles fertig und dann lackieren. Hut ab!
Sag mal Roland: welche Nummer hat denn das Set mit den Verspannungsprofilen? Sind die aus Stahl, flach, geätzt? Hab auf der Seite von RB geschaut, finde aber nix.
21 November 2016, 16:55
Roland SachsenhoferHallo Bernhard- danke für Dein Lob, das bedeutet mir von einem Meister der Verspannungen und der unglaublichen Details viel!
Bin diese Tage unterwegs, werde Dir aber am Wochenende die genauen Produktdetails sagen können.
Aus Stahl, flach und aus einem Trägerblech herausgeätzt beschreibt die Dinger jedenfalls sehr gut...
23 November 2016, 12:15
Hanno KleineckeBrilliant work so far on this hardly ever seen bird Roland ! These angeled red stripes look pefectly symmetrical, not an easy task I presume.....
Respect !
24 November 2016, 08:17
Roland SachsenhoferHanno, thank you very much indeed! Your words make me happy 🙂
Bernhard, ich habe ein Foto der RB Profile in diesen Baubericht gegeben; darauf sollten die Produktnummern hervorgehen, mit denen Du sie hoffentlich bestellen kannst.
25 November 2016, 21:28
Roland SachsenhoferSome more struts on the Ro.43..... and a temporarily attached spacer, which is provided in the Special Hobby kit. Attaching the main float will be difficult enough..... Only four tiny wiggly struts should hold that thing in place...... well, we will see.... 🙂
28 November 2016, 15:34
Bernhard SchrockMoin Roland. Danke: nunmehr "Licht im RB Tunnel". Werde mal antesten zum Vergleich mit "meinen" Profilen aus Neusilber. Grüße Bernhard.
28 November 2016, 20:35
Roland SachsenhoferDear mates, thank you!
A few but essential steps toward finishing this demanding beauty: I am happy to have successfully attached and rigged the main float. Fixing the engine was rather difficult- this kit is very "short run" till the end....
Hallo Bernhard, ich hoffe Du findest das Gewünschte bei RB- denn Du wirst wieder Wunderbares daraus machen.
2 December 2016, 20:49
Roland SachsenhoferThank you Tim!
Finished at last! I supplemented the Ro.43 with several items not mentioned in the manuel but seen on the original as strutting of the exhausts, step treads on the forward pylons or further wiring on the struts.
Not being really an easy kit, I am rather glad to have tackled this beautiful seaplane- and even more glad to have finished it! I hope you like the outcome; three pictures show the trolley from CMK.
8 December 2016, 17:37
Erik LeijdensFantastic result Roland, a joy to look at. Everything is just perfectly executed in my eyes 👍
9 December 2016, 07:12
Hanno KleineckeBeautiful work Roland, Paintwork, rigging and every detail looks perfect !
9 December 2016, 07:26
Bart Goesaertthere are no more superlatives than what is said above... very nice aircraft...
9 December 2016, 11:15
Roland SachsenhoferWow! What a feedback! You make me really happy -and quite proud 🙂
Thank you all for your very kind words!
After that, I feel ready and motivated for another biplane-rigging adventure.....
10 December 2016, 09:34
Roland SachsenhoferThank you mates! I remember it as a not easy but very rewarding construction. A good characterization for many a Special Hobby kit, I think.
5 July 2023, 18:19
